Ubiquiti BulletM2 HP, miniature outdoor client 2, 4GHz, 802.1

Ubiquiti POE Injector, 24VDC, 12W Passives PoE, nur mit geeigneten Endgeräten betreiben!

Wireless Omnidirectional Antenna Range about 1.2km, Length 1210mm, Diameter: 20 mm, including pole holder Connector: N-Type FemaleAngle: H360, V15 degree Antenna gain: 12 dBifor Bridge and for ALL0199 ALL0191 and ALL0191

Highlights:Magnetic base with 10 ft. coax lead Double the range of "rubber duck" antennas Compact, lightweight design Durable UV-stable fiberglass radome Vented end cap and drain holes in baseHigh Performance   The L-com is a high performance omnidirectional WiFi antenna designed for the 2.4 GHz ISM band and 2.36 GHz CDMA band. This compact and lightweight antenna is ideally suited for IEEE 802.11b and 802.11g wireless LANs, puplic wireless hotspots, Bluethooth and other multipoint and mobile applications where high gain and wide coverage is desired. This antenna includes a magnetic base suitable for tabletop or mobile use, and 10 feet of hight performance low-loss 195-Series cable terminated with an N-Female, N-Male or Reverse-Polarity SMA Plug connector. All Weather Operation Constructed for all weather operation, the Antenna features sealed collinear brass elements inside a durable UV-stable maschine gray fiberglass radome. A vented end cap and drain holes in the base help prevent moisture build-up inside the antenna. These features allow the antenna to be mounted in up or down positions. Electrical Specifications   Frequency 2360-2500 MHz Gain 8.5 dBi Impedance 50 Ohm VSWR < 2.0:1 avg. Maximum Input Power 100 WMechanical Specifications Polarization Vertical Vertical Beam Width 15° Horizontal Beam Width 360° Weight 1.5 lbs. (.68 kg) Length 21 in. (533 mm) Base Diameter 2.6 in. (66.8 mm) Radome Material Gray Fiberglass Wind Survival >150 MPH Operating Temperature -40° C to 85° C (-40° F to 185° F) RoHS Compliant Yes Mounting Magnetic Base Antenna Connector N-Female

The L-com HG2415P-180 Sector Panel WiFi Antenna combines 15 dBi gain with a wide 180° beam-width. It is a professional quality "cell site" antenna designed primarily for service providers in the 2.4GHz ISM band. Applications include IEEE 802.11b, 802.11g and 802.11n wireless LAN systems. Rugged and Weatherproof This antenna features a heavy-duty UV protected epoxy-fiberglass radome for all-weather operation. The included mounting system adjusts from 0 to 26 degrees down-tilt. Ideal for Wireless ISP "Cell" Sites This WiFi antenna is an ideal choice for Wireless ISP "cell" sites since the cell size can be easily determined by adjusting the down-tilt angle. Horizontal coverage is a full 180 degrees.   Features: 180° beam-width 26° Down-Tilt Mounting Bracket Includes Mast Mounting Hardware Integral N-Female Connector All weather operation Applications: 2.4 GHz ISM Band IEEE 802.11b, 802.11g and 802.11n Wireless LAN Applications Bluetooth® & Public Wireless Hotspot WiFi & Wireless Video Systems Wireless Internet Provider "cell" sites  Connector: N-Type FemaleMounting = Pole mountingWeight = 4.54kgWind load = 161 km/h

Highlights:12 inch coax lead terminated with a N-Female Connector UV-stable, UL flame rated radome with 60° beam-width DC Short lightning protection Light weight & includes tilt and swivel mast mount Can be installed for either vertical or horizontal polarization Electrical Specifications Frequency 2400-2500 MHz Gain 9 dBi -3 dB Beam Width 60 degrees Impedance 50 Ohm Max. Input Power 50 Watts VSWR < 1.5:1 avg. Lightning Protection DC Short Mechanical Specifications Weight .46 lbs. (.21 kg) Dimensions Length x Diameter 6 x 3 (inches)152 x 76 (mm) Radome Material UV-inhibited Polymer Flame Rating UL 94HB Operating Temperature -40° C to 85° C (-40° F to 185° F) Mounting 1-1/4" (32 mm) to 2" (51 mm) dia. masts Polarization Vertical and Horizontal Wind Survival >150 MPH RoHS Compliant YesWind Loading Data Wind Speed (MPH) Loading 100 4 lb. 125 6 lb.

The L-com HG2414SP-120 Sector Panel WiFi Antenna combines high gain with a wide 120° beam-width. It is a professional quality “cell site” antenna designed primarily for service providers in the 2.4GHz ISM band. Applications include IEEE 802.11b, 802.11g and 802.11n wireless LAN systems. Rugged and Weatherproof This antenna features a heavy-duty plastic radome for all-weather operation. The mounting system adjusts from 0 to 20 degrees down-tilt. Ideal for Wireless Internet "Cell" Sites This WiFi antenna is an ideal choice for Wireless Internet Provider "cell" sites since the cell size can be easily determined by adjusting the down-tilt angle. Horizontal coverage is a full 120 degrees.   Features: 120° Beam Width-Vertically Polarized 20° Down-Tilt Mounting Bracket Includes Mast Mounting Hardware Integral N-Female Connector All weather operation Applications: 2.4 GHz ISM Band IEEE 802.11b, 802.11g and 802.11n Wireless LAN Applications Bluetooth® & Public Wireless Hotspot WiFi & Wireless Video Systems Wireless Internet Provider "cell" sites     Technical Details:   Frequency 2400-2500 MHz Gain 14dBi Polarization Vertical Horizontal Beam Width 120° Vertical Beam Width 15° Impedance 50 Ohm VSWR <1.5:1avg. Front to Back Ratio >23 dB Max. Input Power 300Watts Lightning Protection DC Ground Connector Intergral N-Female Weight 4.4 lbs (2 kg) Dimensions 20 x 7 x 3.5 inch (500 x 180 x 90mm) Radome Material UV-inhibited Plastic Mounting 2 inch  (50 mm) dia. pole max. Operating Temperature -40°C to 85°C (-40°F to 185°F) Rated Wind >130 MPH (210 Km/h)

The L-com HG2418P is a heavy duty high performance directional flat panel antenna suitable for indoor and outdoor applications in the 2.4GHz ISM band, including IEEE 802.11b, 802.11g and 802.11n. This flat panel antenna features a heavy-duty UV-stable grey thermoplastic radome for all-weather operation. The HG2418P antenna is supplied with a tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be installed for vertical or horizontal polarization.   Features: Heavy duty all weather radome DC ground lightning protection Can be mounted for horizontal or vertical polarization N-female connector Includes tilt and swivel mast mount Applications: 2.4 GHz Indoor/Outdoor Wireless LAN systems Supports IEEE 802.11b/g/n applications WiFi and 2.4 GHz wireless video systems Public wireless hotspots Subscriber sites and CPE applications Beam angle: 22 degrees horizontal and 17 ° verticalConnector: N-Type FemaleMounting: Wall Mounting

Highlights: Center fed collinear array Heavy-duty steel mounting brackets Commercial grade antenna Solid Brass Elements Integral N-Female connector 2.4 GHz ISM Band Supports IEEE 802.11b/g/n applications WiFi and 2.4 GHz wireless video systemsBluetooth & Public Wireless HotspotA collinear Omni-Directional antenna that utilizes a center fed Collinear Dipole array that offers superior performance over the traditional bottom fed collinear designs. A center fed collinear has radiating elements that are more uniformly fed with signals of the proper amplitude and phase. In a bottom fed design, the signals that reach the upper elements have undergone significant amplitude and phase degradation. In most cases, the upper elements of an end fed design contribute little to the antennas final composite gain and pattern. In the L-com HG2415U-PRO, an internal copper hard-line provides a low loss path to the antenna's central splitting and phasing component. The brass radiating elements of the HG2415U-PRO utilize an air dielectric for lowest loss and superior radiating efficiency. The design is factory tuned for superior performance. The thick brass elements provide long life in hostile environments.   Technical Details:   Frequency 2400-2500 MHz Gain 15dBi Polarization Vertical Vertical Beam Width 8° Horizontal Beam Width 360° Impedance 50 Ohm Max. Input Power 100 Watts VSWR 1.5:1 or Less Lightning Protection DC Short     Weight Antenna 3.3 lbs (1.5kg) Length 40.5 in (1,03m) Base Diameter 1.69 in (42,9mm) Radome Material Gray Fiberglass Weatherproof Mounting 2.0“ diameter mast max. Wind Survival up to 150 MPH Operating Temperature -40° C to 85° C (-40° F to 185°F) RoHS Compliant YES Connector Intergral N-Female

Technical Details:   Frequency: 2400-2500MHzAntenna gain: 24 dBiImpedance: 50 ohmsVSWR: 1.5:1Beam angle: 8 degreesDimensions: 1000 x 600 (mm)Weight: 2:18 kgweatherproof

Flat-Patch Antenne im 2400 - 2500 Ghz ISM Band Gewinn: 9dbi bei 2,4 Ghz Abstrahlcharakteristik: Directional = Richtantenne Abstrahlwinkel: ___° Grad Horizontal und ___° Vertikal Anschluss: N-Type Buchse Montage: Mastmontage & Wandmontage Gehäuse: IP67 Schutzklasse Windlast: ca. 160km/h

Flat-Patch Antenne im 2400 - 2500 Ghz ISM Band MIMO Gewinn: 12dbi bei 2,4 Ghz Abstrahlcharakteristik: Directional = Richtantenne Abstrahlwinkel: ___° Grad Horizontal und ___° Vertikal Anschluss: N-Type Buchse Montage: Mastmontage & Wandmontage Gehäuse: IP67 Schutzklasse Windlast: ca. 160km/h

Electromagnetical Properties:  Frequency range:2400MHz ? 2400MHzVSWR:Nominal 1.5:1, Maximal 2:1Nominal Impedance:50 ohmGain:12 dBiPolarization:Vertical or HorizontalAzimuth Beamwidth (3dB):Nominal 15°Elevation Beamwidth (3dB):Nominal 15°Maximum Power:10 WMechanical Properties: Enclosure:270mm x 270mm x 75mmConnectors:N femaleIP Protection:IP 67Temperature range:from -40 °C to 80 °CWind Speed:160Km/h

An Instant PoE Adapter designed for indoor use that transforms almost any Ubiquiti PoE device into a fully compliant 48V, PoE-compatible product. Transforms 24V PoE devices to 48V PoE-compliant products Compatible with any 802.3af PoE switch and airMAX M devices Suitable for indoor use     Technical Specifications Specifications Model INS-8023AF-I Dimensions 93.5 x 27 x 21.5 mm Weight 200 g Power Input 48V, PoE (with Sensing Capability) Power Output 18V, 0.7A Output PoE Method Positive 4, 5; Return 7, 8 Ethernet ESD/Surge Protection ±15kV Output Ethernet Cable No Operating Temperature 0 to 70° C (32 to 158° F)

An Instant PoE Adapter designed for outdoor use that transforms almost any Ubiquiti PoE device into a fully compliant 48V, PoE-compatible product. Transforms 24V PoE devices to 48V PoE-compliant products Compatible with any 802.3af PoE switch and airMAX M devices Suitable for outdoor use Includes 10 cm shielded CAT5 cable   Technical Specifications Specifications Model INS-8023AF-O Dimensions 315 x 25.8 x 24.8 mm Weight 300 g Power Input 48V, PoE (with Sensing Capability) Power Output 18V, 0.7A Output PoE Method Positive 4, 5; Return 7, 8 Ethernet ESD/Surge Protection ±15kV Output Ethernet Cable Shielded CAT5, Length: 10 cm Operating Temperature -30 to 70° C (-22 to 158° F)