Ubiquiti UniFi G2 Access Starter Kit Professional / UA-G2-SK-Pro

Keyed emergency override for your Access Hub. Manual unlock port with two physical keys included Backup entry for malfunctioning fail-safe or secure* lock systems *Does not provide redundant power for fail-secure systems.   Technical Specifications Mechanical Dimensions Ø60 x 74 mm (Ø2.4 x 2.9") Weight 94 g (3.32 oz) Enclosure Materials Polycarbonate Hardware Terminal block COM/NO/NC 18-24 AWG Key switch Brass internal wave key, 28VDC, 4A Operating temperature -30 to 65° C (-22 to 149° F) Storage temperature -40 to 85° C (-40 to 185° F) Operating humidity 5 - 95% noncondensing Certifications FCC, IC, CE

Compact, second-generation NFC card reader and request-to-exit device that supports hand-wave door unlocking. Unlock using an NFC card or UniFi Identity mobile app Additional handwave unlock functionality Entry and exit greeting messages Connects to UniFi Access Hub using PoE IP55 weather resistance (-30 to 45° C)     Technical Specifications Mechanical Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") Weight 82 g (2.9 oz) Enclosure material Polycarbonate, glass Mounting In wall, gang box Weatherproofing IP55 Hardware Networking interface (1) 10/100 MbE RJ45 port Connectivity BLE 4.1 Power method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 5W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensors Proximity sensor Speaker (1) 8 ohm, 0.7W LEDs R/G/B/W Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire Operating environment Outdoor use Ambient operating temperature -30 to 45° C (-22 to 113° F) Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02 LED System Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware Strobing red: Emergency lockdown Software Management application UniFi Access: Version 1.5.9 and later

Fail-safe magnetic lock for doors that open inwards and outwards, which is connected to a UniFi Access Hub. Hält up to 270 kg or 540 kg (600-1,200 lb) Can be installed on a wide range of door types* *— Access lock magnetic 270 kg: All types, including full glass — Access lock magnetic 540 kg: All types, excluding full glass Compatibilityät : UA-G2-SK-Pro , UA-G2-SK , EAH-8 , UA-Hub     Technical specifications   Mechanical Maße UA-Lock-Magnetic-270kg Lock body: 250 x 42.5 x 26 mm (9.8 x 1.7 x 1 inch) Mounting plate: 250 x 25 x 5 mm (9.8 x 1 x 0.2 inches) Anchor: 185.5 x 38.5 x 11 mm (7.3 x 1.5 x 0.4 inches) UA-Lock-Magnetic-540kg Lock body: 266 x 67.5 x 40 mm (10.5 x 2.7 x 1.6 inches) Mounting plate: 266 x 40 x 6 mm (10.5 x 1.6 x 0.2 inches) Anchor: 185 x 61 x 16 mm (7.3 x 2.4 x 0.6 inches) Weight UA-Lock-Magnetic-270kg Lock body: 1 kg (2.2 lb) Mounting plate: 70 g (0.15 lb) Anchor: 600 g (1.3 lb) UA-Lock-Magnetic-540kg Lock body: 2.9 kg (6.4 lb) Mounting plate: 145 g (0.3 lb) Anchor: 1.4 kg (3.1 lb) Features Gerät/Mountings: Aluminium Fitting: steel Hardware Voltage 12 V DC Current energy UA-Lock-Magnetic-270kg: 800mA ±10% UA-Lock-Magnetic-540kg: 500mA ±10% Cable connection Connect the following terminals to the UA hub: Lock 12 V/NC (connect to Power Lock Relay NC on the UA hub) Lock 12 V/COM (connect with Powered Lock Relay COM on the UA hub) DPS/+ (DPS+ on the UA hub) DPS/- (DPS on the UA hub) Lock type Fail-safe lock Single door Holding power UA-Lock-Magnetic-270kg: 270 kg (600 lb) UA-Lock-Magnetic-540kg: 540 kg (1,200 lb) LED Greün: unlocked Red: locked Suitability UA-Lock-Magnetic-270kg: wood/metal/glass UA-Lock-Magnetic-540kg: wood/metal Mounting accessories UA-Lock-Magnetic-270kg L-bracket: door thickness < 42 mm (< 1.7 inches), outward opening door Z-angle: is used with L-angle for doors opening inwards U-angle: is used with glass door UA-Lock-Magnetic-540kg L-bracket: door thickness < 42 mm (< 1.7 inch), door opening outwards Z-angle: is used with L-angle for doors opening inwards Operating ambient temperature -10 to 50 °C (14 to 122 °F) Humidity during operation 5 to 90 % non-condensing Certifications FCC, IC, CE  

Fail-safe electric strike lock with 8 mm locking slot depth.

Fail-secure electric strike lock that connects to a UniFi Access Hub (UA Hub). Holds up to 1,200 kg (2,645 lb) Can be installed on an aluminum, steel, or wooden door frame ANSI-compliant design     Technical Specifications Mechanical Dimensions Lock body: 80 x 40 x 35 mm (3.15 x 1.57 x 1.38") Short front plate: 124 x 32 x 3 mm (4.88 x 1.26 x 0.12") Long front plate: 202 x 36 x 3 mm (7.95 x 1.42 x 0.12") Weight Lock body: 185 g (6.5 oz) Short front plate: 50 g (1.8 oz) Long front plate: 130 g (4.6 oz) Enclosure materials Lock body: zinc alloy Front plate/latches: stainless steel Hardware Voltage 12VDC Current power 400mA ±10% Wiring connection Connect the two screw terminal separately to powered lock relay on UA-Hub: NO, COM Lock type Fail secure lock Single door Lock holding force 1,200 kg (2,645 lb) Suitability Wooden Steel Aluminum Screw terminal + and - Operating temperature -10 to 45° C (14 to 113° F) Operating humidity 5 - 90% noncondensing Certifications FCC, IC, CE

Fail-safe electric door opener lock that is connected to a UniFi Access Hub.

Ein Paket hochsicherer NFC-Karten zur Zugangskontrolle innerhalb von UniFi. Mehrschichtige Verschlüsselung zur Vermeidung böswilliger Duplizierung Benutzern und Besuchern zuordenbar Kompatibilität: UA-G3-Pro-B UA-G3-Pro-W UA-G3-Flex-B UA-G3-Flex-W UA-G2-Pro UA-G2-Pro-black UA-Reader Lite UA-G2 UA-G2-black UA-Ultra UA-Intercom UA-G3-B UA-G3-W

Push-to-Exit-Taste für UniFi Access Hubs. Enthält schwarze und weiße Frontplatten Kompatibilität: UA-G2-SK, UA-G2-SK-Pro, EAH-8, UA-Ultra, UA-Hub-Door Technische Daten: Mechanisch Maße 137 x 88 x 38,1 mm (5,4 x 3,5 x 1,5 Zoll) Gewicht 180 g Gehäusematerial Polycarbonat Montagematerial Metall Farbe Schwarz/Weiß Hardware Kontaktart (1) Normal geöffnet Kontaktbewertung 30 V Gleichstrom, 2 A Mechanische Lebensdauer 1.000.000 Klicks Umfeld Nur für den Innenbereich Lagertemperatur -40 bis 70 °C (-40 bis 158 °F) Umgebungstemperatur im Betrieb -10 bis 40 °C (14 bis 104 °F) Luftfeuchtigkeit bei Betrieb 5 bis 90 % nicht kondensierend Zertifizierung CE

Fail-safe electric strike lock with 8 mm locking slot depth.