Ubiquiti Unifi Access Point Pro / WIFI 6 / Indoor / 4x4 MU-MIMO / 300 User+ / U6-Pro /

Mit UI Care verlängern Sie die Herstellergarantie von 1 Jahr auf insgesamt fünf Jahre und genießen exklusive Vorteile: Vorabaustausch  Kostenlose Rücksendung UI Care Lizenz wird von ALLNET aktiviert UI Care-Schutz Ersatz anfordern Ihr Ersatz wird sofort versendet. Sie erhalten den Ersatz innerhalb von 48 Stunden, oft bereits am nächsten Werktag.  Geben Sie das Original kostenlos zurück. Bei Ihrem Ersatzteil liegt ein vorfrankiertes Versandetikett bei. Die Lizenz ist ausschließlich für Ubiquiti-Geräte erhältlich, die über ALLNET bezogen wurden.  Die Lizenz wird an die Seriennummer des Gerätes gebunden und ist nicht auf andere Geräte übertragbar. 

PoE Injector, 802.3AF Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.

Wandhalterung für UniFi Flagship WiFi-Zugangspunkte in voller Größe. Kompatibilität :U7-Pro,U7-Pro-Max,U6-Pro

ESD protection for outdoor high-speed networks. Protects outdoor Ethernet devices (2) Passive, surge-protected RJ45 connections Quick and easy installation Compatible with GbE networks Technical Specifications ETH-SP-G2 Dimensions 91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28") Weight 80 g Weatherproofing IPX5 Interface Connections (2) RJ45 Female Connectors ESD/EMP Protection Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs DC Spark-Over Voltage 90V @ 100V/s Maximum Impulse Spark-Over Voltage 700V @ 1kV/µs Discharge Current 10kA+ Maximum Insulation Resistance 1G ohm @ 50V Maximum Capacitance 1.0 pF @ 1 MHz Data Line Protection RJ45 10/100/1000 Ethernet PoE Support Yes Shock and Vibration Certification ETSI300-019-1.4 Standard Operating Temperature -30 to 65° C (-22 to 149° F) Operating Humidity 10 to 90% Noncondensing

Long-range Gigabit Ethernet adapter that receives PoE/PoE+ and offers passthrough PoE output. Extend PoE connections up to 1 km* (1) GbE RJ45 port for PoE/PoE+ input** (1) GbE RJ45 port for passthrough PoE output 10kA+ surge protection Works reliably in extreme temperatures (-40 to 80° C) *Repeaters must be placed in 100 m increments. **Powered with pins 1, 2+; 3, 6- which may not be supported by certain third-party switches. We recommend using a UniFi switch to power the device.     Technical Specifications Mechanical Dimensions 196.5 x 93.5 x 39 mm ( 7.7 x 3.7 x 1.5") Weight 350 g (12.3 oz) Enclosure material UV stabilized polycarbonate Mounting material Stainless steel Weatherproofing IPX5 Hardware Networking interface (2) GbE RJ45 ports PoE interface (1) Passthrough PoE output 2-pairs (pins 1,2+; 3,6-) Power method PoE/PoE+ 2-pairs (pins 1, 2+; 3, 6-)* *May not be supported by certain third-party switches. We recommend using a UniFi switch to power the device. Max. power consumption (excluding PoE out) 1.5W Voltage range 37—57V DC ESD/EMP protection Air/contact: ± 30kV DC sparkover voltage 90V at 100V/s Max. impulse sparkover voltage 700V at 1kV/μs Discharge current 10kA+ Max. MTU 1,500 bytes Modes Long-range indoor Outdoor ethernet repeater Operating temperature -40 to 80° C (-40 to 176° F) Operating humidity 10 to 95% non-condensing Certifications CE, FCC, IC LEDs System Blue: power ON Ethernet Green: 1 Gbps Amber: 10/100 Mbps PoE Amber: passthrough PoE out

A portable spectrum analyzer designed for the WiFiMan iOS and Android mobile app. 2.4 GHz and 5 GHz unlicensed band scanning 240 minutes continuous scanning battery life BLE smartphone pairing with USB-C charging port iPhone Magsafe attachable support* *A mag-safe case is required to attach this device to an iPhone.   Technical Specifications Mechanical Dimensions 78.5 x 50.5 x 7.9 mm (3.1 x 2 x 0.3") Weight 32 g (1.1 oz) Enclosure material Plastic Weatherproofing IP55 Hardware Management interface Bluetooth Power method Li-ion battery Power supply Rechargeable Li-ion battery, 3.7V DC, 300mAh Max. power consumption 32.4mW Charger voltage USB-C, 5V DC/1A LED White/blue/red Buttons (1) Power (1) Factory-reset Operating temperature 0 to 40° C (32 to 104° F) Operating humidity 10 to 90% noncondensing Certifications CE, FCC, IC SSID Scan Frequency range 2.4 to 2.5 GHz 5.15 to 5.85 GHz Amplitude range -96 dBm to 0 dBm Amplitude resolution 1 dBm Software Management application UniFi WiFiman iOS™: Version 0.18.0 and later UniFi WiFiman Android™: Version 1.15.0 and later

Professional mounting system for UniFi Access Points. Compatible with U6 Enterprise, U6 Pro, U6 Long-Range, AC Pro, AC HD, AC SHD, AC XG Variety of mounting holes for different applications Legend printed on the mounting plate for identifying the holes used for each AP     Technical Specifications Mechanical Dimensions 175.6 mm (6.9") Weight 139 g (4.9 oz) Enclosure material Stainless steel