Wireless LAN - access points enterprise indoor

Ceiling-mounted WiFi 6 AP with 6 spatial streams designed for large offices. WiFi 6 dual-radio 6 spatial streams 140 m² (1,500 ft²) coverage 350+ connected devices Powered using PoE GbE uplink Technical Specifications Mechanical Dimensions Ø197 x 35 mm (Ø7.76 x 1.38") Weight Without mount: 460 g (1.01 lb) With mount: 600 g (1.32 lb) Enclosure material Polycarbonate Mount material Stainless steel (SUS304) Weatherproofing IP54 Hardware Networking interface (1) GbE RJ45 port Management interface Ethernet Bluetooth Power method PoE Power supply UniFi PoE switch PoE adapter (not included) Supported voltage range 44—57V DC Max. power consumption 13W Max. TX power 2.4 GHz 5 GHz 22 dBm 26 dBm MIMO 2.4 GHz 5 GHz 2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) Throughput rate 2.4 GHz 5 GHz 573.5 Mbps 4.8 Gbps Antenna gain 2.4 GHz 5 GHz 4 dBi 6 dBi LEDs White/blue Button Factory reset Mounting Wall/ceiling (Included) Operating temperature -30 to 60° C (-22 to 140° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g WiFi 4/WiFi 5/WiFi 6 Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Concurrent clients 350+ Zero wait DFS Yes**Supported with upcoming firmware versions Supported Data Rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) Application Requirements UniFi Network Version 6.1.56 and later

Ceiling-mount WiFi 7 AP with 6 GHz support, 2.5 GbE uplink, and 9.3 Gbps over-the-air speed. WiFi 7 with 6 GHz support 140 m² (1,500 ft²) coverage 300+ connected devices Powered using PoE+ 2.5 GbE uplink     Technical Specifications Mechanical Dimensions Ø206 x 46 mm (Ø8.1 x 1.8") Weight 680 g (1.5 lb) Enclosure materials Polycarbonate, metal Mount material Mounting bracket: stainless steel (SUS304) Backing plate: galvanized steel (SGCC) Hardware Networking interface (1) 2.5 GbE RJ45 port Management interface Ethernet   Power method PoE+ Power supply UniFi PoE switch Supported voltage range 44—57V DC Max. power consumption 21W Max. TX power 2.4 GHz 5 GHz 6 GHz 22 dBm 26 dBm 23 dBm MIMO 2.4 GHz 5 GHz 6 GHz 2 x 2 2 x 2 2 x 2 Throughput rate 2.4 GHz 5 GHz 6 GHz 688 Mbps 2882 Mbps 5765 Mbps Antenna gain 2.4 GHz 5 GHz 6 GHz 4 dBi 6 dBi 5.8 dBi LEDs White/blue Button Factory reset Mounting Wall/ceiling (Included) Operating temperature -30 to 60° C (-22 to 140° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g/n/ac/ax/be Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Concurrent clients 300+ Supported Data Rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbps to 2.4 Gbps (MCS0 - MCS11 NSS1/2, HE 20/40/80/160) 802.11be (WiFi 7) 7.3 Mbps to 5.7 Gbps (MCS0 - MCS13 NSS1/2, EHT 20/40/80/160/240/320) Application Requirements UniFi Network Version 8.0.7 and later UniFi OS Version 3.2 and later

A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses. 140 m² (1,500 ft²) coverage 300+ connected devices WiFi6 (2x2 MIMO) Powered using PoE     Technical Specifications Mechanical Dimensions Ø160 x 33 mm (Ø6.3 x 1.3") Weight Without mount: 338 g (0.75 lb) With mount: 413 g (0.91 lb) Enclosure materials Polycarbonate, aluminum Mount materials ABS, SGCC steel Hardware Networking interface (1) GbE RJ45 port Management interface Ethernet Power method PoE Supported voltage range 44–57V DC Max. power consumption 9W Max. TX power 2.4 GHz 5 GHz 23 dBm 23 dBm MIMO 2.4 GHz 5 GHz 2 x 2 2 x 2 Throughput rate 2.4 GHz 5 GHz 573.5 Mbps 2402 Mbps Antenna gain 2.4 GHz 5 GHz 3dBi 5.4 dBi Button Factory reset LEDs White/blue Operating temperature -30 to 60° C (-22 to 140° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g WiFi 4/WiFi 5/WiFi 6 Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Zero-wait DFS Yes* *Supported with upcoming firmware versions. Concurrent clients 300+ Software Management application UniFi Network: Version 7.3.76 and later

Compact, ceiling-mounted WiFi 7 AP with 4 spatial streams and 2.5 GbE uplink. Highlights: WLAN 7 4 spacious beaches 115 m² (1,250 ft²) coverage Over 200 connected devices Power supply via PoE 2.5 GbE uplink Technical data: Mechanical Maße Ø171.5 x 33 mm (Ø6.8 x 1.3") Weight 313 g (11 oz) Favourite material Polycarbonate Mounting material Polycarbonate, galvanised steel (SGCC) Hardware Network interface (1) 1/2.5 GbE RJ45 connection Management interface Ethernet Power method PoE Power supply UniFi PoE switch Supported voltage range 42.5–57 V direct current Max. Power consumption 13W Max. Transmission power 2.4 GHz 5 GHz 6 GHz 23 dBm 24 dBm – MIMO 2.4 GHz 5 GHz 6 GHz 2 x 2 (DL/UL MU-MIMO) 2 x 2 (DL/UL MU-MIMO) – Max. Data rate 2.4 GHz 5 GHz 6 GHz 688 Mbit/s (BW40) 4.3 Gbit/s (BW240*) –*Depending on the regulatory region. Antenna gain 2.4 GHz 5 GHz 6 GHz 4 dBi 5 dBi – LEDs White/blue Button Factory reset Mounting Wall/ceiling (included) Operating ambient temperature -30 to 40 °C (-22 to 104 °F) Humidity during operation 5 to 95 % non-condensing Certifications CE, FCC, IC Software WLAN standards 802.11a/b/g/n/ac/ax/be (WLAN 6, WLAN 7) Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 per radio VLAN 802.1Q Advanced QoS Rate limitation per user Isolation of guest traffic Supported Concurrent clients 200+ Supported data rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5.5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11n 6.5 Mbit/s to 300 Mbit/s (MCS0 – MCS15, HT 20/40) 802.11ac 6.5 Mbit/s to 1.7 Gbit/s (MCS0 – MCS9 NSS1/2, VHT 20/40/80/160) 802.11ax (WLAN 6) 7.3 Mbit/s to 2.4 Gbit/s (MCS0 – MCS11 NSS1/2, HE 20/40/80/160) 802.11be (WLAN 7) 7.3 Mbit/s to 4.3 Gbit/s (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240*)*Depending on the regulatory region. Application requirements UniFi network Version X and higher UniFi OS Version X and higher

Cambium Networks cnPilot E410 2x2 Wave2 MIMO Dual-Band AC Access Point Without POE adapter ! Including 5 years manufacturer warranty ! The cnPilot E410 is a WLAN access point of the American manufacturer Cambium Networks and is equipped with the current Dual-Band AC Wave2 standard. In addition to the normal access point operation, you can create up to 16 different SSID's with the E410, on which a maximum of 256 clients can access together. This is ensured, among other things, by the built-in 2x2MIMO Wave2 technology. Due to the roaming functionality of the access point, it is easily possible to create a network with multiple access points with the E410 - The system connects each client automatically and seamlessly with the strongest access point. Controller: Cambium Networks relies on a free cloud and/or free software for the controller which can be operated without great technical knowledge. Unlike many competitors, no licenses or similar fees are required for the controller. Fields of application - WLAN for schools - Office facilities - Ideal for hotels Features: - 1x LAN Gigabit Ethernet Port - Dual band 2.4 & 5 GHz 802.11ac indoor APs - 2x2 MIMO - Range: 180 meters - 16x SSID and 256 simultaneous users - Fast roaming across access points (AP) - Up to 867 mbps - Integrated Omni Antenna 5dBi - Omni (360°)  

Compact, ceiling-mounted WiFi 7 AP with 5 spatial streams and extended signal range. WiFi 7 with 6 GHz support 160 m² (1,750 ft²) coverage Over 300 connected devices Power supply via PoE 2.5 GbE uplink Technical data: https://techspecs.ui.com/unifi/wifi/u7-lr

Wall-mounted WiFi 7 AP with 6 spatial streams and 6 GHz support, customised for home builders with seamless installation options. Highlights: WiFi 7 with 6 GHz support 6 spatial streams 140 m² (1,500 ft²) coverage Over 300 connected devices Power supply via PoE+ 2.5 GbE uplink Versatile use with optional accessories for flush-mounted

Ceiling-mountable WiFi 7 AP with 6 GHz support, 2.5 GbE uplink and 9.3 Gbps over-the-air speed. WiFi 7 with 6 GHz support 140 m² (1,500 ft²) coverage ¨über 300 angeschlossener Geräte Power supply via PoE+ 2.5 GbE uplink Technical specifications Mechanical Maße Ø206 x 46 mm (Ø8.1 x 1.8") Weight 680 g (1.5 pounds) Waste materials Polycarbonate, metal Mounting material Mounting bracket: stainless steel (SUS304) Support plate: galvanised steel (SGCC) Hardware Network interface (1) 2.5 GbE RJ45 port Management interface Ethernet   Power Method PoE+ Power supply UniFi PoE switch Supported voltage range 44–57 V DC Max. Energy consumption 21W Max. Transmission power 2.4 GHz 5 GHz 6 GHz 22 dBm 26 dBm 23 dBm MIMO 2.4 GHz 5 GHz 6 GHz 2 x 2 2 x 2 2 x 2 Throughput rate 2.4 GHz 5 GHz 6 GHz 688 Mbit/s, 2882 Mbit/s, 5765 Mbit/s Antenna gain 2.4 GHz 5 GHz 6 GHz 4 dBi 6 dBi 5.8 dBi LEDs White" Blue key Factory settings reset Montage Wall/ceiling (included) Operating temperature -30 to 60 °C (-22 to 140 °F) Operating humidity 5 to 95 % non-condensing Certifications CE, FCC, IC Software WLAN standards 802.11a/b/g/n/ac/ax/be Security for wireless connections WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 per radio VLAN 802.1Q Advanced QoS Rate limit per user Isolation of guest traffic Supports Concurrent clients 300+ Supported data rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5.5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11n 6.5 Mbit/s to 300 Mbit/s (MCS0 – MCS15, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbit/s to 1.7 Gbit/s (MCS0 – MCS9 NSS1/2, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbit/s to 2.4 Gbit/s (MCS0 – MCS11 NSS1/2, HE 20/40/80/160) 802.11be (WiFi 7) 7.3 Mbit/s to 5.7 Gbit/s (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240/320) Application requirements UniFi network Version 8.0.7 and higher UniFi operating system Version 3.2 and higher

Wall-mounted WiFi 6 access point with a built-in PoE switch. 115 m² (1,250 ft²) coverage 300+ connected devices WiFi6 (4x4 MIMO) Powered using PoE* *PoE+ input required for single port PoE output.     Technical Specifications Mechanical Dimensions 139.66 x 96 x 31.19 mm (5.5 x 3.78 x 1.28") Weight 460 g (1.01 lb) Enclosure materials Plastic, aluminum Mount material Aluminum Hardware Networking interface (1) Data-in: 1GbE RJ45 port (4) Data-out: 1GbE RJ45 ports Management interface Ethernet Bluetooth PoE interface (1) PoE in (PoE output not used) (1) PoE out (Requires a PoE+ switch) Power method PoE Power supply UniFi PoE switch 48V, 0.5A PoE adapter (Optional) Max. power consumption Excluding PoE output: 13.5W Max PoE wattage per port by PSE 15.4W* *Requires a PoE+ switch Voltage range PoE mode 44—57V DC Max. TX power 2.4 GHz 5 GHz 22 dBm 26 dBm MIMO 2.4 GHz 5 GHz 2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) Throughput rate 2.4 GHz 5 GHz 573.5 Mbps 4.8 Gbps Antenna gain 2.4 GHz 5 GHz 5 dBi 5.9 dBi LED White/blue Button Factory reset Operating temperature -30 to 60° C (-22 to 140° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g WiFi 4/WiFi 5/WiFi 6 Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Concurrent clients 300+ Zero-wait DFS Yes* *Supported with upcoming firmware versions. Supported Data Rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) Application Requirements UniFi Network Version 6.4.52 and later

Ceiling-mounted 6-stream WLAN 7 AP with 10/5/2.5/1 GbE support Highlights: WiFi 7 with 6 GHz support 6 spatial streams 140 m² (1,500 ft²) coverage More than 300 connected devices Power supply via PoE+ 10 GbE uplink Technical data: Mechanical Maße Ø206 x 32.5 mm (Ø8.1 x 1.3") Weight 750 g Favourite material Polycarbonate, aluminium Mounting material Stainless steel (SUS304), galvanised steel (SGCC) Hardware Network interface (1) 1/2.5/5/10 GbE RJ45 connection Management interface Ethernet Power method PoE+ Power supply UniFi PoE switch Supported voltage range 42.5–57 V direct current Max. Power consumption 22W Max. Transmission power 2.4 GHz 5 GHz 6 GHz 23 dBm 26 dBm 24 dBm MIMO 2.4 GHz 5 GHz 6 GHz 2 x 2 (DL/UL MU-MIMO) 2 x 2 (DL/UL MU-MIMO) 2 x 2 (DL/UL MU-MIMO) Max. Data rate 2.4 GHz 5 GHz 6 GHz 688 Mbit/s (BW40) 4.3 Gbit/s (BW240) 5.7 Gbit/s (BW320) Antenna gain 2.4 GHz 5 GHz 6 GHz 4 dBi 5 dBi 6 dBi LEDs White/blue Button Factory reset Mounting Wall, ceiling (included) Environmental temperature -30 to 40 °C (-22 to 104 °F) Humidity during operation 5 to 95 % non-condensing Certifications CE, FCC, IC Software WLAN standards 802.11a/b/g/n/ac/ax/be (WLAN 6, WLAN 7) Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 per radio VLAN 802.1Q Advanced QoS Rate limitation per user Isolation of guest traffic Supported Concurrent clients 300+ Supported data rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5.5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11n 6.5 Mbit/s to 300 Mbit/s (MCS0 – MCS15, HT 20/40) 802.11ac 6.5 Mbit/s to 1.7 Gbit/s (MCS0 – MCS9 NSS1/2, VHT 20/40/80/160) 802.11ax (WLAN 6) 7.3 Mbit/s to 2.4 Gbit/s (MCS0 – MCS11 NSS1/2, HE 20/40/80/160) 802.11be (WLAN 7) 7.3 Mbit/s to 5.7 Gbit/s (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240/320)  

High-performance, ceiling-mounted WiFi 6E access point designed to provide seamless, multi-band coverage within high-density client environments.   140 m² (1,500 ft²) coverage 600+ connected devices WiFi6 (4x4 MIMO) Powered using PoE+ Additional 6 GHz radio 2.5GbE uplink       - Technical Specifications Mechanical Dimensions Ø220 x 48 mm (Ø8.7 x 1.9") Weight Without mount: 960 g (2.1 lb) With mount: 1090 g (2.4 lb) Enclosure materials Polycarbonate, aluminum Mount material Stainless steel (SUS304) Hardware Networking interface (1) 2.5GbE RJ45 port Management interface Ethernet Bluetooth Power method PoE+ Power supply UniFi PoE switch 48V, 0.5A PoE adapter (optional) Supported voltage range 44—57V DC Max. power consumption 22W Max. TX power 2.4 GHz 5-7 GHz 22 dBm 26 dBm MIMO 2.4 GHz 5 GHz 6 GHz 2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) Throughput rate 2.4 GHz 5 GHz 6 GHz 573.5 Mbps 4.8 Gbps 4.8 Gbps Antenna gain 2.4 GHz 5 GHz 6 GHz 3.2 dBi 5.3 dBi 6 dBi LEDs White/blue Button Reboot and factory-reset Mounting Wall/ceiling (included) Operating temperature -30 to 60° C (-22 to 140° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g WiFi 4/WiFi 5/WiFi 6/WiFi 6E Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Concurrent clients 600+ Zero-wait DFS Yes* *Supported with upcoming firmware versions. Supported Data Rates (Mbps) 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6/6E) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) Application Requirements UniFi Network Version 7.2.91 and later

Wall-mounted WiFi 7 AP with 4 spatial streams and an integrated 2.5 GbE PoE switch, designed for use in the hospitality industry. Highlights: WLAN 7 4 spacious beaches 115 m² (1,250 ft²) coverage Over 200 connected devices Power supply via PoE/PoE+* 2.5 GbE uplink *PoE+ required for single-port PoE output Technical data: Mechanical Dimensions 137 x 98.7 x 30.2 mm (5.4 x 3.9 x 1.2 inches) Weight 400 g Favourite material Polycarbonate, aluminium Mounting material Aluminium Hardware Network interface (3) 1/2.5 GbE RJ45 ports Management interface Ethernet PoE interface (1) PoE+ input (1) PoE output Power method PoE PoE+ (required for PoE output) Power supply UniFi PoE switch Supported voltage range 42.5–57 V direct current Max. Power consumption 13 W (without PoE output) Max. PoE power per port through PSE 12W Max. Transmission power 2.4 GHz 5 GHz 6 GHz 23 dBm 24 dBm – MIMO 2.4 GHz 5 GHz 6 GHz 2 x 2 (DL/UL MU-MIMO) 2 x 2 (DL/UL MU-MIMO) – Max. Data rate 2.4 GHz 5 GHz 6 GHz 688 Mbit/s (BW40) 4.3 Gbit/s (BW240*) –*Depending on the regulatory region. Antenna gain 2.4 GHz 5 GHz 6 GHz 4 dBi 8 dBi – LEDs White/blue Button Factory reset Mounting Wall (included) Operating ambient temperature -30 to 40 °C (-22 to 104 °F) Humidity during operation 5 to 95 % non-condensing Certifications CE, FCC, IC Software WLAN standards 802.11a/b/g/n/ac/ax/be (WLAN 6, WLAN 7) Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 per radio VLAN 802.1Q Advanced QoS Rate limit per user Isolation of guest traffic Supported Concurrent clients 200+ Supported data rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5.5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11n 6.5 Mbit/s to 300 Mbit/s (MCS0 – MCS15, HT 20/40) 802.11ac 6.5 Mbit/s to 1.7 Gbit/s (MCS0 – MCS9 NSS1/2, VHT 20/40/80/160) 802.11ax (WLAN 6) 7.3 Mbit/s to 2.4 Gbit/s (MCS0 – MCS11 NSS1/2, HE 20/40/80/160) 802.11be (WLAN 7) 7.3 Mbit/s to 4.3 Gbit/s (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240*)*Depending on the regulatory region. Application requirements UniFi network Version x and higher UniFi OS iOS™ version 10.20.0 and higher Android™ version 10.21.3 and higher

R550 Indoor Access Point Die Anforderungen an die Wi-Fi-Kapazität in Klassenzimmern, Büroräumen und mittelgroßen Veranstaltungsorten steigen aufgrund der Zunahme der Anzahl der über Wi-Fi verbundenen Geräte. Ein steigender Bandbreitenbedarf für Anwendungen und ein ständig zunehmendes Sortiment an IoT-Geräten führt zu einer weiteren Belastung der bereits überlasteten Wi-Fi-Netzwerke.  Der Access Point (AP) RUCKUS R550 mit neuester Wi-Fi-6-Technologie (802.11ax) bietet die optimale Kombination aus gesteigerter Kapazität, verbesserter Abdeckung und Kosten in dichten Umgebungen. Was bedeutet Unleashed Das Ruckus Unleashed System ermöglicht es, bis zu 128 Ruckus Access Points (im Bridge Mode) und 2048 Clients ohne Controller (ZoneDirector) zu betreiben. Hierbei fungiert einer der Unleashed Access Points als Controller und übernimmt alle steuernden Aufgaben. Sofern dieser Access Point ausfallen sollte, wird die Verwaltung und Steuerung des Netzwerkes übergangslos von einem anderen Ruckus Unleashed Access Point übernommen. Versorgt mehr Geräte Verbinden Sie mehr Geräte parallel mit vier räumlichen MUMIMO-Streams und gleichzeitigen 2,4-/5-GHz-Dual-BandFunkgeräten, während Sie die Leistung Ihrer Geräte verbessern. Konvergenter Access Point Damit können Kunden isolierte Netzwerke vermeiden und WiFi- und Nicht-Wi-Fi-Funktechnologien in einem einzigen Netzwerk zusammenzufassen, indem sie integrierte BLE- und Zigbee-Verfahren einsetzen und auch zukünftige Funktechnologien über den USB-Anschluss einbinden. Beeindruckende Wifi-Leistung Schwächen Sie die Inferenz und erweitern Sie die Abdeckung durch die patentierte adaptive Antennentechnologie BeamFlex+™ mit mehreren direktionalen Antennenmustern Automatisierung des optimalen Durchsatzes Die dynamische Kanalverwaltungstechnologie ChannelFly nutzt maschinelles Lernen, um automatisch die am wenigsten ausgelasteten Kanäle zu finden. Sie erhalten stets den höchsten Durchsatz, den das Band unterstützt. Besseres Mesh Networking Reduzieren Sie teure Verkabelungen und komplexe MeshKonfigurationen, indem Sie einfach ein Kontrollkästchen mit der Wireless Meshing-Technologie SmartMesh aktivieren, um selbst-formende, selbst-reparierende Mesh-Netzwerke dynamisch zu erstellen. Mehr als Wi-Fi Unterstützen Sie Dienste über Wi-Fi hinaus – mit der IoT-Suite von Ruckus, der Sicherheits- und Onboarding-Software Cloudpath, der Software für die Wi-Fi-Lokalisierung SPoT und der Cloud-Analytics Technische Daten: Netzteil oder POE Injektor nicht im Lieferumfang enthalten.

Easy-to-deploy WiFi 6 coverage extender with a 5.3+ Gbps aggregate throughput rate. 115 m² (1,250 ft²) coverage 300+ connected devices WiFi6 (4x4 MIMO) Powered with standard AC wall outlet* *EU power plug only.     Technical Specifications Mechanical Dimensions US: 169.7 x 112.2 x 32.2 mm (6.68 x 4.42 x 1.27") EU: 169.7 x 112.2 x 77.6 mm (6.68 x 4.42 x 3.05") Weight US: 290 g (10.2 oz) EU: 340 g (12 oz) Enclosure material Plastic Hardware Management interface Bluetooth Power method Universal AC input, 100—240V AC, 0.3A max., 50/60 Hz Supported voltage range 110—240V AC Max. power consumption 11W Max. TX power 2.4 GHz 5 GHz 22 dBm 26 dBm MIMO 2.4 GHz 5 GHz 2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) Throughput rate 2.4 GHz 5 GHz 573.5 Mbps 4.8 Gbps Antenna gain 2.4 GHz 5 GHz 5 dBi 6 dBi LED White/blue Button Factory reset Operating temperature -10 to 50° C (14 to 122° F) Operating humidity 5 to 95% noncondensing Certifications CE, FCC, IC Software WiFi standards 802.11a/b/g WiFi 4/WiFi 5/WiFi 6 Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) BSSID 8 per radio VLAN 802.1Q Advanced QoS Per-user rate limiting Guest traffic isolation Supported Concurrent clients 300+ Zero-wait DFS Yes* *Supported with upcoming firmware versions. Supported Data Rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 - MCS31 , HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 3.4Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) Application Requirements UniFi Network Version 6.5.55 and later  

Ultra-Fast WiFi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.† High-Efficiency WiFi 6: More connected devices TP-Link EAP653 (EU) – Schlanker WiFi 6 Access Point für moderne Netzwerkinfrastrukturen Der TP-Link EAP653 (EU) ist ein eleganter und leistungsstarker AX3000 WiFi 6 Access Point, der sich optimal für den Einsatz in kleinen bis mittelgroßen Unternehmen eignet. Mit Dual-Band-Geschwindigkeit, zentralem Omada SDN-Management und flachem Design bietet er zuverlässige WLAN-Leistung in jedem professionellen Umfeld. Highlights: WiFi 6 (802.11ax) – Kombinierte Geschwindigkeit bis zu 2976 Mbit/s Dual-Band – 2,4 GHz mit 574 Mbit/s & 5 GHz mit 2402 Mbit/s MU-MIMO & OFDMA – Optimale Performance bei hoher Client-Dichte Ultra-flaches Design – Ideal für diskrete Decken- oder Wandmontage Omada SDN-Integration – Cloud- oder lokal verwaltbar PoE+ (802.3at) – Einfache Installation ohne separates Netzteil WPA3-Sicherheit – Höchste Verschlüsselung für professionelle Netzwerke Einsatzbereiche: KMUs, Agenturen und Kanzleien Hotels, Gastronomie und Einzelhandel Bildungseinrichtungen, Praxen, Studios Home-Office & professionelle Smart-Home-Netzwerke Modernes WLAN-Management mit Omada SDN Der EAP653 (EU) lässt sich vollständig in das Omada SDN-Ökosystem integrieren. Sie steuern Ihre Access Points, Switches und Gateways zentral – lokal, per Cloud oder via App – mit voller Kontrolle über Gastzugänge, QoS, VLANs und mehr. Kompakt & leistungsfähig Trotz seines schlanken Gehäuses überzeugt der EAP653 mit starker AX3000-Leistung und eignet sich ideal für flache Installationen an Decken oder Wänden – stilvoll und unauffällig im Design. Technische Daten auf einen Blick Feature Details WLAN-Standard WiFi 6 (802.11ax) Frequenzbänder 2,4 GHz + 5 GHz Max. Datenrate 574 Mbps + 2402 Mbps Ethernet-Port 1× Gigabit RJ45 (PoE+) PoE-Unterstützung 802.3at (PoE+) Montage Decken- oder Wandmontage Management Omada SDN / Cloud / Standalone Sicherheitsfunktionen WPA3, VLAN, Gastzugang, MAC-Filter

Ceiling-mountable WiFi 7 AP with 6 GHz support, 2.5 GbE uplink and 9.3 Gbps over-the-air speed. -WiFi 7 with 6 GHz support -140 m² (1,500 ft²) coverage -Over 300 connected devices -Power supply via PoE+ -2.5 GbE uplink

AX3000 WiFi 6 Accesspoint zur Deckenmontage Ultraschnelles WLAN mit 6 Geschwindigkeiten: Gleichzeitige 574 MBit/s auf 2,4 GHz und 2402 MBit/s auf 5 GHz ergeben 2976 MBit/s WLAN-Geschwindigkeiten.† Hocheffizientes Wi-Fi 6 : Mehr verbundene Geräte können schnellere Geschwindigkeiten genießen. Zentralisiertes Cloud-Management : Die TP-Link EAP650 (EU) – Leistungsstarker WiFi 6 Access Point für Business-Netzwerke Der TP-Link EAP650 (EU) bietet zuverlässiges, leistungsstarkes WiFi 6 (AX3000) für professionelle Netzwerke. Mit Dual-Band-Unterstützung, zentralem Omada SDN-Management, PoE+ und einem besonders kompakten Gehäuse eignet sich der EAP650 ideal für moderne WLAN-Installationen in Unternehmen, Bildungseinrichtungen, Hotels oder Verkaufsräumen. Highlights: AX3000 Dual-Band WiFi 6 – Bis zu 2976 Mbit/s kombiniert MU-MIMO und OFDMA – Optimale Performance bei hoher Gerätedichte Ultrakompaktes Design – Nur 160 mm Durchmesser und 33.6 mm Höhe 1× Gigabit Ethernet mit PoE+ – Daten & Strom über ein Kabel Zentrales Management via Omada SDN (Cloud, Software, Hardware) WPA3-Verschlüsselung – Aktueller Sicherheitsstandard Ideal für: Bürogebäude & KMU Bildungseinrichtungen & Schulen Einzelhandel & Gastronomie Hotels, Apartments & öffentliche Hotspots Omada SDN – volle Kontrolle für Ihr Netzwerk Der EAP650 ist vollständig kompatibel mit der TP-Link Omada SDN-Plattform. Die Verwaltung erfolgt wahlweise über Cloud-Zugang, Software-Controller oder Hardware-Controller wie den OC200 / OC300. Funktionen wie Captive Portal, VLAN, Band Steering, Load Balancing und Roaming runden das Profil ab. Technische Daten im Überblick: Merkmal Details Modell EAP650 (EU) WLAN-Standard WiFi 6 (802.11ax) Frequenzbänder 2.4 GHz (574 Mbps) + 5 GHz (2402 Mbps) MU-MIMO / OFDMA Ja LAN-Port 1× Gigabit Ethernet mit PoE+ (802.3at) Montage Decken- oder Wandmontage Abmessungen 160 × 33.6 mm (Durchmesser × Höhe) Management Omada SDN / Cloud / Standalone Sicherheitsfunktionen WPA3, MAC-Filter, VLAN, Captive Portal

EAP772 - BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point BE9300 Tri-Band Wi-Fi 7 (5760 Mbit/s auf 6 GHz + 2880 Mbit/s auf 5 GHz + 574 Mbit/s auf 2,4 GHz).† Ein dediziertes 6-GHz-Band bietet störungsärmere und breitere Frequenzressourcen.‡ 1× 2.5GbE Port erschließt das volle Potenzial von Wi-Fi 7. 320-MHz-Bandbreiteermöglicht deutlich mehr gleichzeitige Übertragungen.‡ Multi-Link Operation und Multi-RUs gewährleisten die hohe Performance Ihres Netzwerks.‡ Erweiterte Funktionen: Zentrale Verwaltung, Mesh und Seamless Roaming

EAP620 HD - AX1800 Ceiling Mount Wi-Fi 6 Access Point Ultraschnelle Wi-Fi 6-Geschwindigkeiten: Gleichzeitige 574 Mbit/s bei 2,4 GHz und 1201 Mbit/s bei 5 GHz ergeben insgesamt 1775 Mbit/s Wi-Fi-Geschwindigkeit.† High-Density-Konnektivität: 4× erhöhte Kapazität für die gleichzeitige Verbindung von mehr Geräten.‡ In Omada SDN integriert: Zero-Touch Provisioning (ZTP)§, Zentrale Verwaltung und Intelligentes Monitoring. Zentrale Verwaltung: Cloud-Zugriff und Omada App für höchsten Komfort und einfache Verwaltung. Ultraflaches Design: F160 mm × 33,6 mm elegantes Design sorgt für mehr Flexibilität. Nahtloses Roaming: Selbst Videostreams und Sprachanrufe bleiben unbeeinträchtigt, wenn sich Benutzer zwischen Standorten bewegen.? Omada Mesh: Ermöglicht die drahtlose Verbindung zwischen Access Points für eine erweiterte Reichweite und flexible Bereitstellung.? PoE+ betrieben: Unterstützt DC (Adapter im Lieferumfang enthalten), 802.3at PoE und Passive PoE für flexible Installationen. Sicheres Gastnetzwerk: Mit mehreren Authentifizierungsoptionen (SMS/Voucher usw.) und umfassenden drahtlosen Sicherheitsfunktionen

An der Decke montierter 8-Stream-WLAN-7-AP mit dediziertem Spektralscan-Radio und 10/5/2,5/1-GbE-Unterstützung. Highlights: WiFi 7 mit 6 GHz-Unterstützung 8 räumliche Ströme Echtzeit-Spektralanalyse für eine verbesserte Kanalauswahl 160 m² (1.750 ft²) Abdeckung Über 500 verbundene Geräte Stromversorgung über PoE++ 10 GbE-Uplink Technische Daten: Mechanisch Maße Ø215 x 32,5 mm (Ø8,5 x 1,3") Gewicht 800 g Gehäusematerial Polycarbonat, Aluminium Montagematerial Edelstahl (SUS304), verzinkter Stahl (SGCC) Hardware Netzwerkschnittstelle (1) 1/2,5/5/10 GbE RJ45-Anschluss Verwaltungsschnittstelle Ethernet Leistungsmethode PoE++ Stromversorgung UniFi PoE-Switch Unterstützter Spannungsbereich 42,5–57 V Gleichstrom Max. Stromverbrauch 29W Max. Sendeleistung 2,4 GHz 5 GHz 6 GHz 23 dBm 29 ??dBm 24 dBm MIMO 2,4 GHz 5 GHz 6 GHz 2 x 2 (DL/UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) 2 x 2 (DL/UL MU-MIMO) Max. Datenrate 2,4 GHz 5 GHz 6 GHz 688 Mbit/s (BW40) 8,6 Gbit/s (BW240) 5,7 Gbit/s (BW320) Antennengewinn 2,4 GHz 5 GHz 6 GHz 4 dBi 6 dBi 6 dBi LEDs Weiß/Blau Taste Werksreset Montage Wand, Decke (Inklusive) Umgebungstemperatur -30 bis 40 °C (-22 bis 104 °F) Luftfeuchtigkeit bei Betrieb 5 bis 95 % nicht kondensierend Zertifizierungen CE, FCC, IC Software WLAN-Standards 802.11a/b/g/n/ac/ax/be (WLAN 6, WLAN 7) Wireless-Sicherheit WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3/PPSK) BSSID 8 pro Radio VLAN 802.1Q Erweiterte QoS Ratenbegrenzung pro Benutzer Isolierung des Gastverkehrs Unterstützt Gleichzeitige Clients 500+ Unterstützte Datenraten 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11b 1, 2, 5,5, 11 Mbit/s 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbit/s 802.11n 6,5 Mbit/s bis 600 Mbit/s (MCS0 – MCS31, HT 20/40) 802.11ac 6,5 Mbit/s bis 3,4 Gbit/s (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160) 802.11ax (WLAN 6) 7,3 Mbit/s bis 4,8 Gbit/s (MCS0 – MCS11 NSS1/2/3/4, HE 20/40/80/160) 802.11be (WiFi 7) 5 GHz 6 GHz 7,3 Mbit/s bis 8,6 Gbit/s (MCS0 – MCS13 NSS1/2/3/4, EHT 20/40/80/160/240) 7,3 Mbit/s bis 5,7 Gbit/s (MCS0 – MCS13 NSS1/2, EHT 20/40/80/160/240/320)

Schnelles Dualband-WLAN: Gleichzeitige 450 Mbit/s auf 2,4 GHz? und 867 Mbit/s auf 5 GHz bieten eine WLAN-Geschwindigkeit von insgesamt 1317 Mbit/s.† Omada SDN Integration: Zero-Touch Provisioning TP-Link EAP225 (EU) – Leistungsstarker Dual-Band AC1350 Access Point Der TP-Link EAP225 (EU) ist ein zuverlässiger Access Point mit Dual-Band AC1350 WLAN (450 Mbps @ 2,4 GHz + 867 Mbps @ 5 GHz), ideal für kleine und mittlere Unternehmen sowie Gaststätten. Er unterstützt MU-MIMO und PoE, wodurch eine flexible und einfache Installation gewährleistet wird. Hauptmerkmale: Dual-Band AC1350 WLAN – Schnelle und stabile Verbindungen MU-MIMO Technologie – Verbesserte Performance bei mehreren Geräten PoE Unterstützung – Einfache Stromversorgung über Ethernet-Kabel Gigabit Ethernet – Für zuverlässige kabelgebundene Verbindungen Omada SDN kompatibel – Zentrales und einfaches Netzwerkmanagement Ideal für: Kleine bis mittlere Unternehmen Büros, Cafés und Shops Gastgewerbe Bildungseinrichtungen Technische Daten im Überblick: Eigenschaft Details Modell EAP225 (EU) WLAN-Standard 802.11ac Wave 2 (Dual-Band) Datenrate 450 Mbps (2,4 GHz) + 867 Mbps (5 GHz) MU-MIMO Ja LAN-Port 1× Gigabit Ethernet mit PoE Montage Decken- oder Wandmontage Management Omada SDN / Cloud / Standalone Sicherheitsfunktionen WPA2, VLAN, Captive Portal, MAC-Filter

EAP723 - BE3600 Ceiling Mount Wi-Fi 7 Access Point BE3600 Dual-Band Wi-Fi 7 (2882 Mbit/s auf 5 GHz + 688 Mbit/s auf 2.4 GHz). 1× 2.5GbE Port entfaltet das volle Potenzial von Wi-Fi 7. 160 MHz Bandbreiteermöglicht deutlich mehr gleichzeitige Übertragungen. Multi-RUs gewährleisten die hohe Leistung Ihres Netzwerks. Erweiterte Funktionen: Zentrale Verwaltung, Mesh und Seamless Roaming.

Indoor WIFI6 • AX1800• 2x2 •bei 2,4 GHz bis zu 574 Mbit/s - bei 5 GHz bis zu 1201 Mbit/s •1x 2.5 GbE PoE at + 1x 1 GbE • 18W at Stromverbrauch • Betrieb: Standalone, on Premise, Cloud Managed Revision B

ALLNET Apollo Wireless AP WIFI6 • AX3000 • 2x2 • Indoor • 2.5 GbE • ALL-WAPC0522AX-3000 • Apollo Highlights: Dual concurrent 802.11ax architecture & backward-compatible with 11ac/a/b/g/n client devices WPA3 & WPA2-AES authentication support 5 dBi integrated 2x2 antenna Supports up to 2,400 Mbps in the 5GHz frequency band & 574 Mbps in the 2.4GHz frequency band Support 5GHz DFS channels Local and remote management over FitController controller without fees 2,5 GBit 802.3af PoE port for easy placement up to 328 feet from a power source Choice of AP and WDS modes to meet your management & deployment requirements. Operation as SINGLE AP or with on-prem controller ALL-AC100. ALLNET Apollo Series ALL-WAPC0522AX-3000 2x2 Lite Managed Indoor Wireless Access Point offers advanced 802.11ax technology, granting users incredibly speedy and efficient performance with a maximum theoretical speed of 574 Mbps on the 2.4GHz frequency and an incredible 2,400Mbps on 5GHz frequency! Furthermore it's safeguarded by top-tier WPA3/WPA2PSK AES encryption protocols for unparalleled security. security.  Physical Interfaces:     Technical Details Basics: Basic ALL-WAPC0522AX-3000 Apollo Entry 2x2 Entry AP Main Chipset IPQ5018 ARM A53, 1GHz Dual-Core Flash 8MB SPI NOR (reserved) 128MB NAND RAM 512MB DDR3 Transmit Power (Chain + Combining Gain) 2.4GHz: 21dBm 5GHz: 21dBm Interface 1x 10/100/1000/2500Mbps RJ45 Port IEEE802.3at PoE IN 1x Reset Button 1x DC Barrel Jack Operating Temperature 0 ~ 40°C Dimensions (W x L x H) 160 x 160 x 30mm Enclosure Material Plastic (Top Cover) Metal (Bottom Cover) Certification (Generic) FCC, CE Fully Technical Details: Fully ALL-WAPC0522AX-3000 Apollo Entry 2x2 Entry AP Wireless Radio Specification Access Point Type Indoor, dual radios concurrent, 5GHz 802.11 ax 2x2 MU-MIMO is backwards compatible with 802.11 ax/ ac/a/n mode, 2.4GHz 802.11 ax 2x2 MU-MIMO is backwards compatible with 802.11 b/g/n/ac Frequency Radio 2.4GHz: 2400MHz ~ 2495MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. Supported Radio Technology 802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA) 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput (VHT)—HE 20/40/80/160 MHz 802.11ac supports very high throughput (VHT)—VHT 20/40/80 MHz 802.11n supports high throughput(HT) —HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Transmit Power (Combined) 2.4GHz: 21dBm; 5GHz: 21dBm Maximum power is limited by regulatory domain MU-MIMO MU-MIMO allows multiple spatial streamsto be allocated to different clients simultaneously on both download and upload sides. Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance. Power Maximum Power Consumption (TBD,estimated) 17.4W PowerSource Standard IEEE802.3at DC IN 12V/2A Antenna Internal Antenna 2.4GHz:4dBi 5GHz:5dBi BLE2.4GHz:4.5dBi (reserved) Interfaces Networking Interface One 10/100/1000/2500 Mbps Ethernet Port One 10/100/1000 Mbps Ethernet Ports (reserved) Reset Button One(1) Reset Button (Convert Access Point to the Factory default or the Users Default) DCIN One(1) 12V DC IN Mounting Ceiling or Wall Mounting Mount Access Point in on the ceiling or wall via included accessories Mechanical & Environment Dimensions (LxWxH) 160mmx160mmx30mm Operating Temperature: 0°C~40°C Humidity:0%~90% typical Storage Temperature: -20°C~70°C Humidity:0%~90% typical Marks FCC Subpart15 B Subpart C 15.247 Subpart E 15.407 CE EN 300 328 EN 301 893 EN 50385 EN 55032 EN 55024 RF Performance Specification Wireless Indoor Access Point Channel Data Rate Transmit Power (Typical AVG.) Receive Sensitivity Tolerance = +/-1.5 dB 2.4GHz 5GHz 2.4GHz 5GHz Combine EIRP Combine EIRP 802.11b 1M 21 25 - - -95 - 11M 21 25 - - -88 - 802.11g/a 6M 21 25 21 26 -92 -92 54M 18 22 18 23 -74 -73 802.11n HT20 MCS0 21 25 21 26 -92 -92 MCS7 18 22 18 23 -74 -72 802.11n HT40 MCS0 21 25 21 26 -91 -89 MCS7 18 22 18 23 -72 -64 802.11ac VHT20 MCS0 21 25 21 26 -92 -92 MCS8 17 21 17 22 -67 -67 802.11ac VHT40 MCS0 21 25 21 26 -91 -89 MCS9 17 21 17 22 -66 -64 802.11ac VHT80 MCS0 - - 20 25 - -86 MCS9 - - 17 22 - -61 802.11ac VHT160 MCS0 - - 20 25 - -83 MCS11 - - 16 21 - -59 802.11ax HE20 MCS0 21 25 21 26 -92 -92 MCS11 16 20 16 21 -62 -61 802.11ax HE40 MCS0 21 25 21 26 -90 -89 MCS11 16 20 16 21 -59 -58 802.11ax HE80 MCS0 - - 20 25 - -86 MCS11 - - 16 21 - -56 802.11ax HE160 MCS0 - - 20 25 - -83 MCS11 - - 15 20 - -53