ALLNET ALL3542 / 8 port contact input for DIN rail

Temperature measurement via network easy made Highlights: detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network Robust metal housing Brackets for attachment to wall Suitable for all operating systems 1x ALL3006 Temp-Sensor including Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API Optional Free-Software Modules like SNMP  / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean / The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage. The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems. The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/ Intelligent features and programming by switching matrix Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists. Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol.   Flexible installation options The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary.   Borderless Cross-site temperature measurement Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc. Maximum number of sensors per ALL3419:       Element Specification Sensor interface: 3x RJ45 for sensor/actor modules 1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise" 1x RJ45 Console Port for Serial-Connection Ethernet: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN 2,4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power source: 100~240 VAC, 50/60 Hz Power Consumption: <3 watt in operation Housing: metal housing Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 70 °C Storage humidity: 5% ~ 90% (non-condensing) Regulatory: CE, RoHS Dimensions: 92 x 85 x 24 mm (L x W x H)  Weight: 134 g (ALL3419 with ALL3006 sensor) Package content: -ALLNET ALL3419 -ALLNET ALL3006 temperature sensor -WLAN antenna -External power supply -Quick installation guide

Your smart entry into building automation – ALLNET ALL3500v2 With the ALLNET ALL3500v2 building automation centre, you get a cost-effective and versatile platform that is optimally tailored to semi-professional requirements. Thanks to state-of-the-art technology, high connectivity and a wide range of applications, the ALL3500v2 is the perfect partner for your automation projects. Highlights at a glance: Cost-efficient platform: Maximum functionality with minimum space and cost requirements. Intuitive operation: Can be conveniently controlled via web interface (HTTP/HTTPS) or smartphone. Flexible data connection: Integration via JSON, MQTT or SNMP possible. Versatile sensor technology: Comprehensive monitoring of temperature, humidity, air pressure and more. Future-proof: Expandable with i2C sensor ports and compatible with a wide range of ALLNET sensors and actuators. Features that impress The ALL3500v2 is based on a stable embedded Linux platform (MIPS or ARM architecture), which enables seamless integration into existing systems. With four RJ45 ports for sensor modules, you can realise a wide range of control and monitoring tasks. Whether local control or cloud-based applications - the ALL3500v2 offers you all the tools you need to organise your building automation efficiently and securely. Versatile application options: HACCP temperature monitoring: Precise detection and control in critical environments. Room climate control: Monitoring of temperature and humidity for demand-based control of heaters or humidifiers. Security management: Detection of gas odour, smoke or water ingress and triggering of alarms. Automated garden irrigation: Time and humidity-controlled for maximum efficiency. Energy consumption optimisation: Control based on consumption data from external sensors (e.g. ALL4590/4490 power meter). Compact, powerful, versatile The ALL3500v2 combines a variety of functions in a compact design that has been specially developed for space-saving installations. With four relays, sensor ports and contact interfaces, it can be used flexibly and provides the basis for sophisticated automation solutions - ideal for private and commercial applications. Why ALLNET ALL3500v2? With the ALL3500v2 you get a reliable and economical solution for building automation. From monitoring and control to integration into complex installations, this central unit offers everything you need for smart, efficient and future-proof automation. Start your building automation now with the ALLNET ALL3500v2! Versatile sensors, actuators and switching options for your automation The ALLNET ALL3500v2 impresses with its flexibility and functionality: With four ports for external sensors and actuators, four relay outputs for controlling loads and four contact inputs for buttons or switches, it provides an ideal basis for complex automation applications. Sensing and control – Precise and versatile With the ALL3500v2, you can measure and analyse a variety of environmental parameters such as temperature, humidity or air pressure and execute automatic switching operations based on them. Control is either manual, time-controlled or dynamic, based on the measured values. Connectivity that inspires The ALL3500v2 is equipped with Ethernet and built-in WLAN, which enables easy integration into existing networks. Using an IP address in the TCP/IP network, you can: Retrieve and edit measurement data directly in the web browser. Receive automated notifications and reports by email. Request and control data via JSON or XML interfaces. Optional MQTT support enables the transmission of data to the cloud and integration into IoT environments. With its powerful connectivity and flexible control options, the ALL3500v2 is the perfect choice for efficient and future-proof building automation.   I²C-Bus – Intelligent use of existing cable networks The ALLNET ALL3500v2 enables an uncomplicated connection of measurement and control modules via a standard network cable (RJ45, Cat. 5). This allows you to continue using existing cable infrastructures such as network or telephone cabling and saves costs and effort during installation. Advantages of the I²C bus system: Simple cabling: A standard network cable is sufficient to connect sensors and modules. Long range: Up to 100 metres of cable between the central unit and module. Integrated power supply: The modules are supplied with power directly from the central unit – no separate power source required. USB port – external memory connection The USB port on the ALLNET ALL3500v2 allows you to integrate external storage media easily and flexibly. This allows data to be saved and processed directly on connected USB devices. This enables extended data logging and analysis. Maximum number of sensors per ALL3500v2: Technical data: Element Specification Interfaces: 4x RJ45 for sensor modules Network connection: 1x RJ45 10/100Mbps Switching relay: 4x potential-free Contact input: 4x for push-buttons, switches, etc. Wireless LAN: Mediatek MTK7688 SOC chipset 2.4 GHz Wireless N Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Other interfaces: 1x USB 2.0 1x console Power supply: 100~240 VAC, 50/60 Hz, external power supply Power consumption: <5 watts maximum How to use: Metal walkway Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Labelling: CE, RoHS Dimensions: 220.4 x 80 x 30 mm (length x width x height) Weight: 400 grams (device incl. WLAN antenna and ALL3006 sensor) Packaging contents: -ALLNET ALL3500v2 -ALLNET ALL3008 temperature sensor -WLAN antenna -External power supply -Operating instructions

The new central unit for your building control system Highlights: 16x I2C sensor ports for maximum expansion. max. 128x possible sensors via ALL4404 multiplexing hub. Linux based opensource operating system 1x USB front port for optional USB dongles Two-line LCD display for status and IP address indication Redundant 12VDC input with "Widget" display in Webgui   The ALLNET ALL5000v2 IP Facility Control Server is the new flagship of the ALLNET home automation series. It offers all the features of the other MSR control centers, which is the consistent further development of the popular ALLNET MSR Ethernet sensor meter. During the development of the control server, the wishes of existing MSR users were taken into account and a large number of new features and interfaces were added without sacrificing the familiar functions. Also new is the expandability of the devices. The ALLNET ALL5000v2 IP Facility Control Server automates all tasks in building control, such as detection and signaling of environmental conditions such as temperature, humidity, pressure and much more, as well as triggering switching operations via contacts, relays and the like. This can be done manually, time-controlled or depending on recorded values. A wide variety of scenarios such as lighting, blinds, ventilation and household appliances can be controlled with the ALLNET ALL5000v2 IP Facility Control Server. From temperature detection and demand-based heating of individual rooms, control of garden irrigation, alarming in case of gas smell and water intrusion to automatic opening and closing of blinds depending on daylight and much more, there are no limits to your ideas. Accessible everywhere via network, internet and smartphone You control everything from a PC, notebook or other mobile device, such as smartphone or webpad. No matter if the devices you want to control, measure, regulate are located in the same building or on another continent. The ALLNET ALL5000v2 is accessible via an IP address. Your existing computer network and the Internet serve as the medium. The determined values can be retrieved directly from the device via the web browser or sent periodically via email or when a value exceeds or falls below certain preset limits. An integrated JSON interface is used to retrieve data externally via the Internet.   Individually adapted to every need The ALLNET ALL5000v2 IP Facility Control Server has a Linux-based opensource operating system. Thus it offers enough freedom for own developments and adaptations of the software directly to the intended use of the user. Would you like a little more? The new interface diversity The ALLNET ALL5000v2 IP Facility Control Server leaves nothing to be desired and even tops the ALLNET ALL3505 Sensoric Appliance. There are 16 sensor ports (RJ45) for the connection of sensors, actuators, relays, etc. available. TThere is 1x USB port available, which can be used for example for USB memory sticks or EnOcean USB dongle for the use of EnOcean wireless switches. The two-line LCD display integrated into the housing shows you the status and the IP address. Technical Details: Element Specification Product: ALLNET ALL5000v2 IP Facility Control Server Module ports for measuring and switching modules: 16x RJ45 I2C-Sensor Ports for additional Sensors/Actors.    Interfaces: 1x USB 2.0 extern 1x USB 2.0 intern 1x Temperatursensor onboard Network connection: 1x RJ45 10/100Mbps Power Supply: 100~240 VAC, 50/60 Hz, internal power supply unit optional redundant 12VDC power input Power consumption: <3 Watt (without additional modules) Housing: 19" metal housing (1U) Environment: Temperature operation: 5 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Marks: CE, RoHS Dimensions: 440 x 230 x 44 mm (width x depth x height) Package contents: 1 piece ALLNET ALL5000v2 1 piece ALLNET ALL3008 temperature sensor 1 manual Power cable

Highlights: Enables switching of the connected load (up to 16A) via the integrated web server- New release 3.2 Wireless LAN according to IEEE802.11b/g/n with 300 Mbps & 10/100 Mbit RJ45 network connection German earthing contact plug/socket for 200 - 250 V alternating voltage Switching time, programme-controlled or manually possible The ALL3073v3 network socket can be used to switch electrical devices on and off via a computer network. The ALL3073v3 acts as an intermediate plug between the power socket and the electrical consumer. It is integrated into a computer network and receives a unique IP address. It can be configured and operated via any web browser from a PC, MAC, webpad or smartphone, regardless of a specific platform or operating system. No additional software is required. The switching operations can be programmed manually, time-controlled, etc. Several ALL3073v3s can be switched independently of each other. They also work together with other ALLNET automation solutions, such as ALL369x Powermeter, ALL3418v2, ALL3500, ALL3505, ALL4500 or ALL5000. The ALLNET ALL3073v3 adapter is also equipped with the heavily revised user interface 3.2. In addition to numerous innovations in the user interface, Release 3.2 also offers the option of quickly and easily integrating multiple ALLNET remote sensors and actuators into the control interface via JSON for the first time. This means that the sensor data can be managed across locations via a central interface, resulting in significantly greater clarity and simpler administration. In addition to the wired 10/100Mbit/s RJ45 network interface, the ALL3073v3 also has a wireless LAN interface in accordance with the IEEE802.1b/g/n standard and can therefore also be integrated into a wireless LAN network; both as a client or access point. With the server monitoring function, you can set the ALL3073v3 to monitor and reset a computer or router. A ping is sent to the registered system, if the system does not respond within a specified time, the output is switched off for an adjustable time.Examples of use: Remotely control and restart PCs and servers Restart routers remotely including automatic boot-up (dead time programmable) Time-controlled minimisation of unnecessary power consumption due to standby devices Complex switching scenarios in conjunction with other ALLNET building automation products including the influence of temperature, humidity, etc. Many other applications... Technical data: Network: 10BaseT 100BaseTX Network connection: RJ45 Supported standards: IEEE 802.3, IEEE 802.3u Protocols: HTTP/HTTPS TCP/IP Management/control: via web browser, XML, JSON Operating systems: All network-compatible operating systems Voltage range: 200 - 250 volts Switching current: max. 16 amps = 3680 ohmic load Current consumption: Idle mode: 1.5W ~2W WiFi active: 1 device connected and download approx. 1.80W ~ 2.70W How to use: Plastic housing with integrated earthing contact power socket/plug Environment: Temperature operation: 0 ~ 40 °C Humidity operating: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non-condensing) Dimensions: 125 x 68 x 40 (60) mm (height x width x depth) Weight: 200 grams (adapter only) Labelling CE

WLAN power socket, switchable via network / IP with performance measurement (positive/negative) • Allows switching of connected consumers (up to 16A resistive load) via integrated webserver - new release 3.2 • 10/100 Mbit RJ45 network interface • IEEE802.11b/g/n Wireless LAN with 300 Mbps • With integrated power plug socket • for 200 - 250 V AC • Voltage and consumption measurement • Time controlled, programmatically or manually switching The ALL3075v4 network power socket allows switching of connected devices via network or IP. The ALLNET device acts like an adapter between power outlet and electric consumer. Connected to a computer network, the ALL3075v4 is accessable via its own IP address. Both, con guration and operation can be done with any network based OS. No additional software is needed, the only requirement is a web browser. The ALL3075v4 measures and stores the energy consumption of any connected device. The switching operations can be done manually, based on time, consumption or by individual programming. Several devices of the The ALL3075v4 can also be combined to a grid. The network power socket works perfect with various ALLNET automation solutions, like the ALL369x Powermeter or ALL3418v2, 3419, ALL3500, ALL3505, ALL4500 and ALL5000 central units. The ALLNET ALL3075v4 adapter is based on the brandnew Release 3.2 user interface. In addition to several visible innovations, Release 3.2 offers for the rst time even the possibility to integrate multiple ALLNET sensors or actuators quickly and easily via JSON. This allows central administration of multi-site based measurement data. This supports administrators with a perfect clarity and facilitates their work dramatically. In additon to the RJ45 network interface the ALL3075v4 also offers a Wireless-N interface with a maximum transfer-speed of 300 MBit. This allows easy integration into wireless networks and seamless usage and con guration from every smart phone or tablet. The ALL3075v4 can be con gured for client or access point usage. The "server control" function allows easy control and even reset of connected PC or server systems. Server control sends automated ping requests to the connected server. If the PC or Server system does not answer in a pre-con gured time, the power outlet will quit the transfer and reset the connected device to restore functionality. Technical Details: Network: 10BaseT 100BaseTX Network connector: RJ45 Wireless LAN / WiFi: 2.4 GHz Wireless N, 150 Mbps 1T1R WiFi chipset: Ralink RT3352 WiFi Securityt: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Protocol: HTTP/HTTPS TCP/IP Management: via web browser, XML/JSON supported OS: all network supporting OS supported voltage: 200 - 250 volts switching current: max. 16 amps = until 3680 ohmic load power measurement: consumption (negative) feed-in from solar panels (positive) Housing: PVC with European Socket Environment: working temperature: 0 ~ 40 °C working humidity: 10% ~ 85% (non condensing) storage temperature: -20 ~ 60 °C storage humidity: 5% ~ 90% (non condensing) dimensions: 125 x 68 x 40 (60) mm weight: 200 grams (only the adapter)

Building automation Have you ever wondered why, although your phone a missed call displays, while, however, a visitor made ??his way to the front door in vain if you are not there? Or is it already happened to you, that the time-controlled shutters have you locked out while you still enjoyed the mild summer evening on the patio? Have you ever seen the roof windows are left open, when it began to rain suddenly, and nobody's noticed? Or are you still standing in winter every day an hour earlier to vain to wait for the announced winter? Do not you wish sometimes even an artificial intelligence that thinks for you? IP Symcon is the answer to this problem. Cross-manufacturer There are many different systems of the industry , making it possible to do a variety of things for you in the house. Blinds manufacturers equip their products with out remote controls, a manufacturer of electrical equipment bring solutions for intelligent light control on the market, multifunction remote controls simplify operation of various entertainment media and heater manufacturers have extensive controls integrated. The problem is that these different solutions, so innovative it may be, either alone work very well, but not together. IP Symcon "a bridge" between these systems so that they work as a single. It is therefore possible from now on with a normal light switch, to control not just the light, but also blinds, heating and music. But that is far from the end: Control the home theater, the indoor climate and let you wake up, depending on the actual outside temperature in the morning with your favorite radio station. Energy saving It has by now gotten around, that the standby mode at night unnecessarily consumes a lot of energy. You can certainly use IP Symcon to turn off TV and DVD player overnight or to regulate the heating down at night. And not so as it will enable many simple operating units: e.g. always 20 clock, but then when you're actually gone to bed - even if it's become late. In addition, you can display your power consumption graph. Savings can be determined and identify power-hungry so easily. This will save you smart electricity, gas and oil, and on top of that you enjoy the comfort of IP Symcon. Comfort With IP Symcon you can easily create special lighting scenarios for living, working or watching TV and drive. Mood lighting provide a cozy feeling, but for crafting or reading you need a lot of light. Do not longer run through the entire apartment to several reading lamps and cabinets or television lighting on and off. Just press a button and everything shines as desired. Perhaps, however, not only by remote control touch screen next to the couch, but also via mobile phone or iPod via WiFi? From home or away? You are the director. Safety Keep track of who was at your front door. Secure your door with a code number or open the apartment door with a smart card. If someone took to create it, you will receive an SMS to your phone. The video intercom also shows you, no matter what, is going on. To open the door with the fingerprint is Science Fiction? Not with IP Symcon. Motion detectors in individual rooms not only ensure that the light is switched, they are when you want, simultaneously coupled with your alarm system. Window and door contacts provide additional security. When leaving the house, you will be notified when a window is still open or the back door is not closed. Visualization How to keep track of so much technology? With IP Symcon you get a comprehensive visualization package. Design your own user interface. With the IP Symcon Dashboard, you can completely create without programming knowledge comfortable user interfaces for the PC or a touch panel in the kitchen. Access is also possible from a distance via the Internet. Whether you prefer a clear plan of his apartment or the style of a classic website, is only limited by your own imagination. Or do you prefer to work in the browser? About using the included web server you call in the browser on your own, designed in PHP and HTML, home control sites. Just as you would build their website. For the built-in web server provides IP Symcon. For those who like it even easier, there's also the IP Symcon WebFront. Here is the keyword "zero configuration". Without even doing a handshake, you can here, "Out of the Box" control your home automation via the browser using AJAX. From home and elsewhere. But that's not all. Let generate graphs and trends and give you not only keep track of your energy consumption or the precipitation of the last month. Always up to date!     More Details:  

IP Symcon Basic is the center of your digital world of technology.It combines a variety of household devices, computer accessories or audio & video components under a software interface. Using blocks can be used without programming skills on graphic way, only with the mouse a control problem can be solved. Sensors, actuators, timers and logic modules can be linked together. After checking in a simulation to use in practice, nothing stands in the way. IP Symcon is the interface between a PC and various actuators and sensors.It is an industry-and technology-neutral system for solving visualization and tax-related tasks in the home automation and process automation. IP Symcon provides function modules for control and regulation, reporting, archiving and logging (graphic representation, database). With its powerful coupling to a variety of hardware modules and the secure data archiving it ensures high availability.The IP Symcon software allows any custom shortcuts of events and measurements of building services equipment (e.g. ALL3xxx and ALL4xxx family), programming via PHP scripts, and configuration graphical user interface for visualization of measurement data and operating procedures and much more.Maximum numbers of variables: 250Maximum number of devices: unlimitedTime limitation: unlimitedFeatures and Compatibility:ALLNET ALL30xx / ALL40xx seriescompatible to FHZ 1X00 PC     FS20-Receriver     FS20-Transmitter   HMS (House and alarm system)     KS300 weather sensor   FHT80b (Heating control)     433MHz weather-system of ELV (in conjunction with the PC-weather receiver WWWReader/Text Parser   -  Front-End: Web-Server & IPS-Designer     EIB (European Installation Bus) > Interface PEI Typ 10 mit FT1.2 Protokollserial interface (com-port)     1-Wire components (inter alia: DS1820 / thermometer, DS2450 /A/D-converter)XComfort of Moeller     ISDN - (Capi / DTMF Sounds/Voice)     DMX - Lighttechnology ( DMX4ALL)     enocean® PTM200, STM100, TCM120     SIEMENS: GIGASET WebCam, M34 USB     Sound Files & Voice output (DirectX Media Player / Winamp)     technical alternative UVR1611, Schüco VARIO     memPIO (BMC measurement)     MEILHAUS - RedLab     VELLEMAN - USB - Experimentation and interface board     BTkit, IRtrans, LIRC compatiblel > IR - remote control     WAGO / Beckhoff SPS       System-requirements: PC - IBM compatibleOperating Systems Microsoft Windows 2000/XP/VistaRAM minimum 256 MB100 MB free hard disk spaceDownload VersionInternet connection required