ALLNET Apollo Wireless AP WIFI6 • AX3000 • 2x2 • Indoor • 2.5 GbE • ALL-WAPC0522AX-3000 • Apollo Highlights: Dual concurrent 802.11ax architecture & backward-compatible with 11ac/a/b/g/n client devices WPA3 & WPA2-AES authentication support 5 dBi integrated 2x2 antenna Supports up to 2,400 Mbps in the 5GHz frequency band & 574 Mbps in the 2.4GHz frequency band Support 5GHz DFS channels Local and remote management over FitController controller without fees 2,5 GBit 802.3af PoE port for easy placement up to 328 feet from a power source Choice of AP and WDS modes to meet your management & deployment requirements. Operation as SINGLE AP or with on-prem controller ALL-AC100. ALLNET Apollo Series ALL-WAPC0522AX-3000 2x2 Lite Managed Indoor Wireless Access Point offers advanced 802.11ax technology, granting users incredibly speedy and efficient performance with a maximum theoretical speed of 574 Mbps on the 2.4GHz frequency and an incredible 2,400Mbps on 5GHz frequency! Furthermore it's safeguarded by top-tier WPA3/WPA2PSK AES encryption protocols for unparalleled security. security.  Physical Interfaces:     Technical Details Basics: Basic ALL-WAPC0522AX-3000 Apollo Entry 2x2 Entry AP Main Chipset IPQ5018 ARM A53, 1GHz Dual-Core Flash 8MB SPI NOR (reserved) 128MB NAND RAM 512MB DDR3 Transmit Power (Chain + Combining Gain) 2.4GHz: 21dBm 5GHz: 21dBm Interface 1x 10/100/1000/2500Mbps RJ45 Port IEEE802.3at PoE IN 1x Reset Button 1x DC Barrel Jack Operating Temperature 0 ~ 40°C Dimensions (W x L x H) 160 x 160 x 30mm Enclosure Material Plastic (Top Cover) Metal (Bottom Cover) Certification (Generic) FCC, CE Fully Technical Details: Fully ALL-WAPC0522AX-3000 Apollo Entry 2x2 Entry AP Wireless Radio Specification Access Point Type Indoor, dual radios concurrent, 5GHz 802.11 ax 2x2 MU-MIMO is backwards compatible with 802.11 ax/ ac/a/n mode, 2.4GHz 802.11 ax 2x2 MU-MIMO is backwards compatible with 802.11 b/g/n/ac Frequency Radio 2.4GHz: 2400MHz ~ 2495MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. Supported Radio Technology 802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA) 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput (VHT)—HE 20/40/80/160 MHz 802.11ac supports very high throughput (VHT)—VHT 20/40/80 MHz 802.11n supports high throughput(HT) —HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Transmit Power (Combined) 2.4GHz: 21dBm; 5GHz: 21dBm Maximum power is limited by regulatory domain MU-MIMO MU-MIMO allows multiple spatial streamsto be allocated to different clients simultaneously on both download and upload sides. Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance. Power Maximum Power Consumption (TBD,estimated) 17.4W PowerSource Standard IEEE802.3at DC IN 12V/2A Antenna Internal Antenna 2.4GHz:4dBi 5GHz:5dBi BLE2.4GHz:4.5dBi (reserved) Interfaces Networking Interface One 10/100/1000/2500 Mbps Ethernet Port One 10/100/1000 Mbps Ethernet Ports (reserved) Reset Button One(1) Reset Button (Convert Access Point to the Factory default or the Users Default) DCIN One(1) 12V DC IN Mounting Ceiling or Wall Mounting Mount Access Point in on the ceiling or wall via included accessories Mechanical & Environment Dimensions (LxWxH) 160mmx160mmx30mm Operating Temperature: 0°C~40°C Humidity:0%~90% typical Storage Temperature: -20°C~70°C Humidity:0%~90% typical Marks FCC Subpart15 B Subpart C 15.247 Subpart E 15.407 CE EN 300 328 EN 301 893 EN 50385 EN 55032 EN 55024 RF Performance Specification Wireless Indoor Access Point Channel Data Rate Transmit Power (Typical AVG.) Receive Sensitivity Tolerance = +/-1.5 dB 2.4GHz 5GHz 2.4GHz 5GHz Combine EIRP Combine EIRP 802.11b 1M 21 25 - - -95 - 11M 21 25 - - -88 - 802.11g/a 6M 21 25 21 26 -92 -92 54M 18 22 18 23 -74 -73 802.11n HT20 MCS0 21 25 21 26 -92 -92 MCS7 18 22 18 23 -74 -72 802.11n HT40 MCS0 21 25 21 26 -91 -89 MCS7 18 22 18 23 -72 -64 802.11ac VHT20 MCS0 21 25 21 26 -92 -92 MCS8 17 21 17 22 -67 -67 802.11ac VHT40 MCS0 21 25 21 26 -91 -89 MCS9 17 21 17 22 -66 -64 802.11ac VHT80 MCS0 - - 20 25 - -86 MCS9 - - 17 22 - -61 802.11ac VHT160 MCS0 - - 20 25 - -83 MCS11 - - 16 21 - -59 802.11ax HE20 MCS0 21 25 21 26 -92 -92 MCS11 16 20 16 21 -62 -61 802.11ax HE40 MCS0 21 25 21 26 -90 -89 MCS11 16 20 16 21 -59 -58 802.11ax HE80 MCS0 - - 20 25 - -86 MCS11 - - 16 21 - -56 802.11ax HE160 MCS0 - - 20 25 - -83 MCS11 - - 15 20 - -53

ALLNET Apollo Wireless AP WIFI6 • AX5400 • 2x2:2; 4x4:4 • Indoor • 2.5 GbE • ALL-WAPC0544AX-5400 • Apollo Highlights:     Dual concurrent 802.11ax architecture and backward compatibility with 11ac/a/b/g/n client devices     Support for WPA3 and WPA2-AES authentication     5 dBi integrated 2x2 antenna     Supports up to 2,400 Mbps in the 5GHz frequency band and 574 Mbps in the 2.4GHz frequency band     Supports 5GHz DFS channels     Local and remote management via FitController controller without fees     1GB 802.3af PoE port for easy placement up to 328 feet from a power source     Choice of AP and WDS modes to meet your management and deployment needs. ALLNET Apollo Series ALL-WAPC0544AX-5400 is an advanced WiFi 6 Access Point, which deepens and extends the capabilities of WiFi for use in high-capacity environments. The Enterprise level feature packed hardware can be offered in a slim and low profile enclosure while also achieving optimal thermal heat dissipation to run more efficiently and consume less power for maximum 4x4 spatial streams with 4804 Mbps in 5GHz frequency band and 573 Mbps in 2.4GHz frequency band.  Physical Interfaces: Technical Details Basics: Basic ALL-WAPC0522AX-5400 Apollo Pro 2x2:2; 4x4:4 Main Chipset IPQ5018 ARM A53, 1GHz Dual-Core Flash 8MB SPI NOR (reserved) 128MB NAND RAM 512MB DDR3 Transmit Power (Combined) IPQ5018@2.4GHz: 21dBm QCN6024@5GHz: 27dBm Interface 1x 10/100/1000/2500Mbps RJ45 Port 1x Reset Button 1x DC Barrel Jack Operating Temperature 0 ~ 40°C Dimensions (W x L x H) 160 x 160 x 30mm Fully Technical Details: Fully ALL-WAPC0522AX-5400 Apollo Pro 2x2:2; 4x4:4 Wireless Radio Specification Access Point Type Indoor, dual radios concurrent, 5GHz 802.11 ax 4x4 MU MU-MIMO is backwards compatible with 802.11 ax/ ac/a/n mode, 2.4GHz 802.11 ax 2x2 MU MU-MIMO is backwards compatible with 802.11 b/g/n/ac Frequency Radio 2.4GHz: 2400MHz ~ 2495MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. Supported Radio Technology 802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA) 802.11b: Direct Direct-sequence spread spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput (VHT) —HE 20/40/80/160 MHz 802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz 802.11n supports high throughput (HT) —HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256 256-QAM) 802.11n/ac/ax packet aggregation: A A-MPDU, A A-SPDU Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Transmit Power (Combined) 2.4GHz: 21dBm; 5GHz: 27dBm Maximum power is limited by regulatory domain MU-MIMO MU-MIMO allows multiple spatial streamsto be allocated to different clients simultaneously on both download and upload sides. Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance. Power Maximum Power Consumption (TBD,estimated) 18W PowerSource Standard IEEE802.3at DC IN 12V/2A Antenna Internal Antenna 2.4GHz:4dBi 5GHz:5dBi Interfaces Networking Interface One 10/100/1000/2500 Mbps Ethernet Port Reset Button One(1) Reset Button (Convert Access Point to the Factory default or the Users Default) DCIN One(1) 12V DC IN Mounting Ceiling or Wall Mounting Mount Access Point in on the ceiling or wall via included accessories Mechanical & Environment Dimensions (LxWxH) 160mmx160mmx30mm Weight 430G Operating Temperature: 0°C~40°C Humidity:0%~90% typical Storage Temperature: -20°C~70°C Humidity:0%~90% typical Marks FCC Subpart15 B Subpart C 15.247 Subpart E 15.407 CE EN 300 328 EN 301 893 EN 50385 EN 55032 EN 55024 Fully Technical Details: Fully ALL-WAPC0522AX-5400 Apollo Pro 2x2:2; 4x4:4 Wireless Radio Specification AccessPointType Indoor, dual radios concurrent, 5GHz 802.11 ax 4x4 MU MU-MIMO is backwards compatible with 802.11 ax/ ac/a/n mode, 2.4GHz 802.11 ax 2x2 MU MU-MIMO is backwards compatible with 802.11 b/g/n/ac FrequencyRadio 2.4GHz: 2400MHz ~ 2495MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. SupportedRadioTechnology 802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA) 802.11b: Direct Direct-sequence spread spread-spectrum (DSSS) 802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput (VHT) —HE 20/40/80/160 MHz 802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz 802.11n supports high throughput (HT) —HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256 256-QAM) 802.11n/ac/ax packet aggregation: A A-MPDU, A A-SPDU SupportedModulationType 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM TransmitPower(Combined) 2.4GHz: 21dBm; 5GHz: 27dBm Maximum power is limited by regulatory domain MU-MIMO MU-MIMO allows multiple spatial streamsto be allocated to different clients simultaneously on both download and upload sides. TxBeamforming(TxBF) Increasing signal reliability and transmitting distance. Power MaximumPowerConsumption(TBD,estimated) 18W PowerSource Standard IEEE802.3at DC IN 12V/2A Antenna Internal Antenna 2.4GHz:4dBi 5GHz:5dBi Interfaces NetworkingInterface One 10/100/1000/2500 Mbps Ethernet Port Reset Button One(1) Reset Button (Convert Access Point to the Factory default or the Users Default) DCIN One(1) 12V DC IN Mounting Ceiling or Wall Mounting Mount Access Point in on the ceiling or wall via included accessories Mechanical & Environment Dimensions(LxWxH) 160mmx160mmx30mm Weight 430G Operating Temperature: 0°C~40°C Humidity:0%~90% typical Storage Temperature: -20°C~70°C Humidity:0%~90% typical Marks FCC Subpart15 B Subpart C 15.247 Subpart E 15.407 CE EN 300 328 EN 301 893 EN 50385 EN 55032 EN 55024 RF Performance Specification Wireless Indoor Access Point Channel   Data Rate   Transmit Power (Typical AVG.)   Tolerance = +/-1.5 dBm   Receive Sensitivity (Per-chain)   2.4GHz   5GHz   2.4GHz   5GHz               Combine EIRP   Combine EIRP       802.11b 1M 21 25 - - -95 - 11M 21 25 - - -88 - 802.11g/a 6M 21 25 27 32 -91 -88 54M 18 22 25 30 -75 -71 802.11n HT20 MCS0 21 25 27 32 -92 -88 MCS7 18 22 25 30 -74 -71 802.11n HT40 MCS0 21 25 27 32 -89 -86 MCS7 18 22 25 30 -71 -68 802.11ac VHT20 MCS0 21 25 27 32 -92 -88 MCS8 17 21 24 29 -70 -66 802.11ac VHT40 MCS0 21 25 27 32 -89 -86 MCS9 17 21 23 28 -67 -63 802.11ac VHT80 MCS0 - - 27 32 - -81 MCS9 - - 23 28 - -59 802.11ac VHT160 MCS0 - - 27 32 - -80 MCS11 - - 22 27 - -53 802.11ax HE20 MCS0 21 25 27 32 -92 -88 MCS11 16 20 21 26 -63 -59 802.11ax HE40 MCS0 21 25 27 32 -89 -86 MCS11 16 20 21 26 -61 -57 802.11ax HE80 MCS0 - - 27 32 - -81 MCS11 - - 21 26 - -52 802.11ax HE160 MCS0 - - 27 32 - -80 MCS11 - - 21 26 - -52

ALLNET Apollo Wireless AP WIFI6 • AX3000 • 2x2 • Outdoor IP67 • 2.5 GbE • ALL-WAPC0522AXO-3000 • Apollo Highlights: Dual concurrent 802.11ax architecture & backward-compatible with 11ac/a/b/g/n client devices; 2x2 antenna Supports up to 1,200 Mbps in 5-GHz frequency band & 574 Mbps in 2.4-GHz frequency band IP67-Rated weatherproof & dustproof housing withstands harsh environments 2.5 GigE PoE+ compatible port for easy placement where power outlets are scarce Select cloud or on-premises management options based on network architecture, administrative permissions From anywhere cloud visibility and control Setup in minutes with app-based step by step instructions Quick-scan device register, remote monitoring and troubleshooting Real-time system metrics, analytics and remote configurations No access point licensing or subscription fees Uplink and downlink of OFDMA improves transmission to APs and client devices Target wake time for power-saving of client & IoT devices Uplink & downlink of MU-MIMO for optimal signal & reception reliability for up to 2 devices Introducing the ALLNET Apollo Series ALL-WAPC0522AXO-3000: Your Gateway to High-Capacity Outdoor WiFi 6. Step into the future of wireless connectivity with our cutting-edge IP67 Outdoor WiFi 6 Access Point. The ALLNET Apollo Series ALL-WAPC0522AXO-3000 pushes the boundaries of WiFi technology, making it the ideal choice for high-capacity environments where performance and reliability are paramount. Packed with enterprise-level features, this device seamlessly combines top-tier hardware with an advanced enclosure design that not only enhances its aesthetics but also optimizes thermal heat dissipation. This means that it operates more efficiently and consumes less power, ensuring you get the most out of your network. Experience lightning-fast speeds with 2x2 spatial streams, reaching an impressive 2402 Mbps in the 5GHz frequency band and 573 Mbps in the 2.4GHz frequency band. Whether you're streaming, gaming, or running a business, this Access Point has the bandwidth to meet your demands. Elevate your network capabilities, and say goodbye to connectivity woes with the ALLNET Apollo Series ALL-WAPC0522AXO-3000. The future of WiFi is here, and it's faster and more reliable than ever before. Technical Details Basics:   ALL-WAPC0522AXO-3000 Main Chipset IPQ5016 ARM A53, 1GHz Dual-Core Flash 8MB SPI NOR (Reserved) 128MB NAND RAM 512MB DDR3 Transmit Power (Combined) 2.4GHz: 22dBm 5GHz: 24dBm Bluetooth N/A Interface 1x 10/100/1000/2500Mbps RJ45 Port Operating Temperature -20 ~ 60°C Dimensions (W x L x H) 190 x 124 x 47 mm Enclosure Material Plastic (Top Cover) Metal (Bottom Cover) Certification (Generic) Non-DFS FCC, CE DFS Fully Technical Details: Fully ALL-WAPC0522AXO-3000 Apollo IP67 Outdoor 2x2 Entry AP Wireless Radio Specification Access Point Type Outdoor IP67, dual radios concurrent, 5GHz 802.11 ax 2x2 MU-MIMO is backwards compatible with 802.11 ax/ ac/a/n mode, 2.4GHz 802.11 ax 2x2 MU-MIMO is backwards compatible with 802.11 b/g/n/ac Frequency Radio 2.4GHz: 2400MHz ~ 2495MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. Supported Radio Technology 802.11ax: Orthogonal Frequency Division Multiple Access(OFDMA) 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11ac/a/g/n:Orthogonal Frequency Division Multiple (OFDM) 802.11ax supports very high throughput(VHT)—HE 20/40/80/160 MHz 802.11ac supports very high throughput(VHT)—VHT 20/40/80 MHz 802.11n supports high throughput(HT) —HT 20/40 MHz 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM) 802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU Supported Modulation Type 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Transmit Power (Combined) 2.4GHz: 21dBm; 5GHz: 24dBm Maximum power is limited by regulatory domain MU-MIMO MU-MIMO allows multiple spatial streamsto be allocated to different clients simultaneously on both download and upload sides. Tx Beamforming (TxBF) Increasing signal reliability and transmitting distance. Power Maximum Power Consumption 25W Power Source Standard IEEE802.3at Antenna External Antennas 2.4GHz:4dBi R-SMA-Male 5GHz:5dBi RSMA-Male R-SMA Female-Connector on AP for additional Antennas. Interfaces Networking Interface One(1) 10/100/1000/2500 Mbps Ethernet Ports IP Rating IP67 Mounting Ceiling or Wall Mounting Mount Access Point on the wall or Pole via included accessories Mechanical & Environment Dimensions(LxWxH) 190 x 124 x 47 mm Operating Temperature: -20°C~60°C Humidity: 0%~90% typical Storage Temperature: -30°C~80°C Humidity: 0%~90% typical Marks FCC Subpart15 B Subpart C 15.247 Subpart E 15.407CE EN 300 328 EN 301 893 EN 50385 EN 55032 EN 55024

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

ALLNET Switch smart managed Layer2 10 Port • PoE Budget 140W • 8x PoE at • 2x SFP • 19" • Fanless • ALL-SG8310v2PM Highlights: 8-port 10/100/1000Mbps with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a' 30 Watt (IEEE802.3at or 8x IEEE802.3af) FANLESS DESIGN with internal power supply unit Jumbo Frames and IGMP Snooping Support Link Aggregation and Rapid Spanning Tree IEEE802.1q VLAN tagging and 802.1p priority queues PoE budget 140 W The ALL-SG8310v2PM is an 8-port 10/100/1000Mbps switch with PoE support on all ports, perfect for segmenting larger networks. It is an excellent choice to provide your network with more power and efficiency. IEEE 802.3af&at Power over Ethernet (PoE). The ALL-SG8310v2PM supports IEEE 802.3at PoE standard on 4 ports ports with up to 30W power per port for the connected PoE end devices, or full IEEE802.3af power on 8 ports with up to 15.4W. The maximum PoE budget is 140W. The ALL-SG8310v2PM uses the existing LAN cabling for the power supply. This facilitates the installation of PoE end devices such as WLAN access points, IP cameras, VoIP telephones and much more, as no consideration has to be given to power sockets during placement. The PoE ON/OFF function allows the administrator to conveniently reset the end devices remotely by turning off the PoE power supply for each individual port. High-Speed Networking/Jumbo Frames Support The ALL-SG8310v2PM provides an excellent solution for expanding your Gigabit network. With Gigabit speed, this product offers high flexibility and bandwidth for connectivity to servers, workstations and other connected devices. In addition, it also supports 9.6K jumbo frames for better network utilization, which greatly improves the transfer of large files. Extensive management/administration features Modern applications for video surveillance with IP cameras and Voice over IP are increasingly replacing classic analog technologies. This also increases the demands on the network infrastructure. The ALLNET ALL-SG8310v2PM is equipped with many management and security functions for all modern communication scenarios. IGMP Snooping, Tagged VLAN, Quality of Service, Port Trunking, Flow Control, Storm Control, Link Aggregation, IEEE802.1x, SNMP v1/ v2c and Spanning Tree are only a small excerpt from the extensive feature portfolio of the ALL-SG8310v2PM. For more details see Technical Details.  Technical Details: Items Specifications Model No. ALL-SG8310v2PM Key Components RTL8382M Flash IC:16MB DDR: 1Gb IP808AR PSE controller I/O ports 8x GbE ports, RJ45 2 x SFP Giga ports Reset Button: reset to default setting, re-start system Console port by RTJ45 Type PoE ports Port# 1~ 8 IEEE802.3at, IEEE802.3af LED Define PWR/SYS: Green LED Off: power off or fail On: power on Blinking: system booting up PoE Alert: Green LED Off: No over PoE Max power Alert On: Over PoE Max power Alert Port LED: Link/ACT: Off: port disconnected or link fail Green on: 10/100/1000Mbps connected Blinking: sending or receiving data PoE: Off: PoE power output off Green on: PoE power output on SFP:          - Off: disconnected or fail          - Green: 100/1000Mbps connected          - Blinking: data transmitting HW feature IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T IEEE802.3az EEE IEEE802.3at, IEEE802.3af MAC address Table: 8K Packet buffer size: 4.1M Jumbo Frame: 9K bytes Console Support Cisco-like CLI command Security DT Security circuit. PoE power pin-out Alternative A (Pin 1,2/3,6) PoE Output power capacity Maximum output :30W per each port Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+ Automatically discover the connection of PD device and immediately sends power to it Auto disable port if the port current is over 700mA or short happens Priority default setting is lower port NO. has high priority The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable Power Input Internal power supply Input: 100-240V AC Output: 180W PoE Power Budget 140W Reset button Support reset to default configuration Dimension 265(W) x 183(D) x 44(H) mm FAN Design Fan-less Temperature Operating: 0 ~ 40? Storage : -40 ~ 70? Humidity Operating: 10% ~ 90% RH (non-condensing) Storage: 5% ~ 90% RH (non-condensing)   Software Features Status System Information     Logging Message     Port Statistics   Error Disabled   Bandwidth Utilization   Link Aggregation     MAC Address Table 8K   Network IP Address Static / Dynamic   System Time SNTP / From Computer / Manual Time   Port Port Setting State / Speed / Duplex / Flow Control   Error Disabled Recovery Interval ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood Link Aggregation Group   Port Setting State / Speed / Flow Control LACP   EEE     Jumbo Frame 9K Byte   PoE Global Setting Schedule Status   Priority Setting     Power Limit     Power Show     VLAN VLAN Create VLAN   VLAN Configuration   Membership   Port Setting   Voice VLAN Property   Voice OUI   Protocol VLAN Protocol Group   Group Binding   MAC VLAN MAC Group   Group Binding   Surveillance VLAN Property   Surveillance OUI   GVRP Property   Membership   Statistics   MAC Address Table Dynamic Address Aging Time   Static Address     Filtering Address     Spanning Tree Property State / Operation Mode / Path Cost / BPDU Handling Operation Mode : STP/RSTP/MSTP Port Setting     MST Instance     MST Port Setting     Statistics     Discovery LLDP Property   Port Setting   MED Network Policy   MED Port Setting   Packet View   Local Information   Neighbor   Statistics   Multicast General Property Unknown Multicast Action / Multicast Forward Method Group Address   Router Port   Forward All Table   Throttling   Filtering Profile   Filtering Binding   IGMP Snooping Property State / Version / Report Suppression Querier   Statistics   MLD Snooping Property State / Version / Report Suppression Statistics   MVR Property State / VLAN / Mode / Group Start / Group Count / Query Time Port Setting   Group Address     Security RADIUS     TACACS+     AAA Method List   Login Authentication Console / Telnet / SSH / HTTP / HTTPS Management Access Management VLAN   Management Service Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout Management ACL   Management ACE   Authentication Manager Property   Port Setting   MAC-Based Local Account   WEB-Based Local Account   Sessions   Port Security     Protected Port     Storm Control   State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown) DoS Property   Port Setting   Dynamic ARP Inspection Property   Statistics   DHCP Snooping Property   Statistics   Option82 Property   Option82 Circuit ID   IP Source Guard Port Setting   IMPV Binding   Save Database   ACL MAC ACL     MAC ACE     IPv4 ACL     IPv4 ACE     IPv6 ACL     IPv6 ACE       ACL Binding     QoS General Property CoS / DSCP / CoS-DSCP / IP Precedence Queue Scheduling Strict Priority / WRR CoS Mapping   DSCP Mapping   IP Precedence Mapping   Rate Limit Ingress / Egress Port   Egress Queue   Diagnostics Logging Property Console / RAM / Flash Remote Server   Mirroring     Ping     Traceroute     Copper Test     Fiber Module     UDLD Property Message Time Neighbor   Management User Account     Firmware Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Active Image Active Image  / Backup Image Configuration Upgrade / Backup Action (Upgrade / Backup) / Method (TFTP / HTTP) Save Configuration Source File / Destination File, Restore Factory Default SNMP View   Group   Community   User   Engine ID   Trap Event Authentication Failure / Link UP_Down / Cold Start / Warm Start Notification   RMON Statistics     History     Event     Alarm      

ALLNET Switch full managed Layer2+ 10 Port • 8x GbE • PoE Budget 130W • 8x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8610PMJ Highlights: 8-port 10/100/1000Mbit/s with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a´ 30 watts (IEEE802.3at or 8x IEEE802.3af) LÜFTERLESS DESIGN with internal power supply Supports L2+ switching functions such as 802.1Q VLAN, mirroring, port isolation, IGMP snooping, DHCP snooping, LLDP, POE+ management, IP source guard, ARP inspection, ACLs etc. Support of Spanning Tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s). Support of extended management via WEB, CLI, TELNET, SSH, SNMP. Support for cable diagnostics and SFP DDM. Supports PoE management, such as PoE schedule, PoE PD Alive. Supports G.8032 quick ring protocol. Self-recovery time <20ms. Supports DDM, SFP digital diagnostics & monitoring Support of IPV4 and IPV6 functions for static routing Support of memory and CPU monitoring 4KV overvoltage protection, 6KV contact/8KV air protection PoE budget 130 W NEW: PoE & LAN JSON Java script notation API for ON/OFF via remote Product description: The ALL-SG8610PM is a fully managed Layer 2+ Gigabit PoE switch that features intelligent PoE capabilities to improve the availability of critical business applications. It offers IPv6/IPv4 management and an integrated L2+ Gigabit switching engine together with 8*10/100/1000BASE-T ports with 30 Watt 802.3at PoE+ and 2 Gigabit SFP slots. With a total power budget of up to 130 W for various types of PoE applications, it offers fast, secure and cost-effective Power over Ethernet network solutions for IP surveillance in small businesses and enterprises. The ALL-SG8610PM is programmed for advanced switch management features such as 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping and MLD Snooping. In addition, the Link Layer Discovery Protocol (LLDP) is included as a layer 2 protocol to determine basic information about neighbouring devices in the local broadcast domain.   Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8610PM has the following special PoE management functions:   PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in Intelligent PD alive check for frozen PDs The ALL-SG8610PM industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8610PM restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is significantly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the AALL-SG8610PM Switch Ethernet PoE can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals, and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The intelligent PoE switch ALL-SG8610PM allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8610PM supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   Strong layer 2 functions The ALL-SG8610PM Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8610PM enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8610PM is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SG8610PM supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.    JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8610PM Copper Ports 8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 2x1G BASE-X SFP interfaces, supports 100M/1G Mbps dual mode PoE ports 1~8-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-forward Switch Fabric 20 Gbps/non-blocking Throughput 14.88Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max.150 watts/1122 BTU PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) PoE budget 130W LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP interfaces (Port 9 to Port 10): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate limiting (Ingress/Egress) Stri Priority Security features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload  Dual firmware LLDP Configuration Export/Import                                CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 280x213x44.5mm Weight 2 kg Working Temperature -10°C to 45°C Storage Temperature -20°C to 70°C MTBF 50,000hrs