Highlight: The ALL-BM410-XGSPON-GBIC ONT is delivered with one SFP+ (Small Form-factor Pluggable) based 10G Base-X Gigabit Ethernet data interface, supporting: Built-in layer-2 switching Advanced data features such as VLAN tag manipulation, classification, and filtering The ALL-BM410XGSPON-GBIC is also certified by Swisscom. To extend the 10GPON deployment in existing access network for business and residential subscribers, XGS PON ONT SFP ALL-BM410-XGSPON-GBIC is a standard SFP+ form factor, which can easily replace the Ethernet SFP+ module existing in Ethernet gateway, switch, router or backhaul equipment etc. The ALL-BM410XGSPON-GBIC is also certified by Swisscom. Equipped with ITU-T G.9807 compliant XGS-PON interface, ALL-BM410-XGSPON-GBIC incorporates interoperability, key customers’ specific requirements and cost-efficiency. By integrating XGS PON MAC and standard compliant OMCI stack, ALL-BM410-XGSPON-GBIC provides all XGS PON functionalities and full range FCAPS management features including supervision, monitoring and maintenance Technical Details: Installation SFP+ Interface PON Interface Compliant with ITU-T G.9807 XGS-PON standards SFF type laser, SC/APC connector 10G bps Burst Mode Upstream Transmitter 10G bps Downstream Receiver Compliant with ITU-T G.9807 Class N1 APD receiver and DFB transmitter 4~+9dBm launch power, -28dBm sensitivity, and -9dBm overload Wavelengths: US 1260nm to 1280nm, DS 1575nm to 1580nm  Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option PON QoS Multiple T-CONTs per device Multiple GEM Ports per device Flexible mapping between GEM Ports and T- CONT Activation with automatic discovered SN and password in conformance with ITU-T G.984.3 AES-128 Decryption with key generation and switching FEC (Forward Error Correction) DBA reporting by piggyback reports in the DBRu (mode 0) 802.1p mapper service profile on U/S Mapping of GEM Ports into a T-CONT with priority queues based scheduling Support Multicast GEM port and incident broadcast GEM port. Ethernet Interface SFP+ based 10GBase-X GbE interface Hardware priority queues on the downstream direction in support of CoS 802.1D bridging Virtual switch based on 802.1q VLAN VLAN tagging/detagging VLAN stacking (Q-in-Q) and VLAN Translation IP ToS/DSCP to 802.1p mapping Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP Marking/remarking of 802.1p Broadcast/Multicast rate limiting OAM Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.988 Alarming and AVC report, performance monitoring Remotely software image download over OMCI, as well as activation and rebooting Hold two software sets with software image integrity checking and automatic rollback Power Supply Power Consumption: < 2.8W Dimensions 87.5 mm x 15.6 mm x 13.75 mm (L x W x D) Working Environment case operating temperature: -40~+85 °C Humidity: 5 ~ 95% relative humidity, non- condensed Safety & EMI CE compliant FCC/UL compliant

Hightlights: Upgrade Any Ethernet Gateway to GPON — Instantly The ALL-BM510-GPON-GBIC transforms any SFP-based router, switch, or gateway into a full GPON ONT, enabling rapid fiber rollout without hardware replacement. Compact SFP ONT with High-Performance GPON A complete ITU-T G.984-compliant GPON ONT packed into a miniature SFP form factor—optimized for business and residential fiber deployments. Seamless Integration via HSGMII (2.5G/1G) Plug-and-play SFP with HSGMII interface for effortless compatibility with existing Ethernet infrastructures. Carrier-Grade QoS and Advanced L2 Features Full VLAN functionality, QoS mapping, traffic classification, and advanced bridging deliver premium service quality for demanding fiber applications. Ultra-Low Power Consumption Consumes less than 1.6W, ideal for high-density deployments. Wide Temperature Operation Reliable performance from –10°C to +85°C, designed for harsh environments and telecom cabinets. Secure and Fully Managed Integrated OMCI stack for remote provisioning, monitoring, firmware upgrades, and FCAPS management. High Optical Performance ProdSupports Class B+ optics with APD receiver and DFB transmitter for long-reach, stable GPON connectivity. To extend the GPON deployment in existing access network for business and residential subscribers, GPON ONT SFP ALL-BM510-GPON-GBIC provides the standard SFP package with SGMII interface, which can easily replace the Ethernet SFP module existing in Ethernet gateway, switch, router or backhaul equipment etc. Equipped with ITU-T G.984 compliant GPON interface, ALL-BM510-GPON-GBIC incorporates interoperability, key customers’ specific requirements and cost-efficiency. By integrating GPON MAC and standard compliant OMCI stack, G- 97S provides all GPON functionality and full range FCAPS management features including supervision, monitoring and maintenance Service Data The ALL-BM510-GPON-GBIC ONT is delivered with one SFP (Small Form-factor Pluggable) based HSGMII interface, supporting: Built-in layer-2 switching Advanced data features such as VLAN tag manipulation, classification, and filtering Specification Dimensions 72 mm x 14 mm x 11.8 mm (L x W x D) Power Supply Full Speed Power Consumption at room temperature: < 1.6W Working Environment case operating temperature: -10~+85 °C Humidity: 5 ~ 95% relative humidity, non- condensed Safety & EMI CE compliant FCC/UL compliant Installation SFP interface GPON Interface Compliant with ITU-T G.984 GPON standards SFF type laser, SC/APC connector 1.244G bps Burst Mode Upstream Transmitter 2.488 Gbps Downstream Receiver Compliant with ITU-T G.984.2 Amd1, Class B+ APD receiver and DFB transmitter 0.5~+5dBm launch power, -27 dBm sensitivity, and -8dBm overload Wavelengths: US 1310nm, DS 1490nm Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I, ONT support Class C or Class C+ optics as an option GPON QoS Multiple T-CONTs per device Multiple GEM Ports per device Flexible mapping between GEM Ports and T- CONT Activation with automatic discovered SN and password in conformance with ITU-T G.984.3 AES-128 Decryption with key generation and switching FEC (Forward Error Correction) DBA reporting by piggyback reports in the DBRu (mode 0) 802.1p mapper service profile on U/S Mapping of GEM Ports into a T-CONT with priority queues based scheduling Support Multicast GEM port and incident broadcast GEM port. Ethernet Interface SFP based HSGMII interface, 2.5GE/1GE compatible Hardware priority queues on the downstream direction in support of CoS 802.1D bridging Virtual switch based on 802.1q VLAN VLAN tagging/detagging VLAN stacking (Q-in-Q) and VLAN Translation IP ToS/DSCP to 802.1p mapping Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP Marking/remarking of 802.1p Broadcast/Multicast rate limiting OAM Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.984.4 and G.988 Alarming and AVC report, performance monitoring Remotely software image download over OMCI, as well as activation and rebooting Hold two software sets with software image integrity checking and automatic rollback Pin Description: PINNO. Name Active 1 VEET   2 TX Fault High 3 TX Disable High 4 SDA   5 SCL   6 MOD_ABS   7 Dying Gasp Up to host pin definition 8 RX_LOS High 9 VEER   10 VEET   11 VEER   12 RD-   13 RD+   14 VEER   15 VCCR   16 VCCT   17 VEET   18 TD+   19 TD-   20 VEET