GPON

ZTE FTTH GPON Bridge Modem F601 • 1 GPON Optical interface • 1 RJ-45 port for Gigabit Ethernet interface Buttons • Power On/Off • Reset LEDs • Power, PON, LOS, ALARM, LAN QoS • Flexible packet classification • Up to eight queues • SP/WRR/SP+WRR • Ingress rate limit • Egress shaping Security • Traffic filtering based on UNI port, VLAN ID, 802.1p, UNI+802.1p or VLAN+802.1p • DoS attack defending • Multiple VPN (IPSec, PPTP) passthrough • MAC address filtering • Broadcast/ Unicast/ Multicast attack protection • Broadcast packet rate limit • Dual image for firmware auto rollback Management • OMCI management • WEB GUI management • Local built-in diagnostic function • Logs and statistics • Remote upgrade by HTTP Electrical Characteristics . Power input: 12V DC . Power consumption: less than 2.5W Physical Characteristics . Net weight: 86.6g . Dimensions: 90x70x26mm Environmental Characteristics . Operating Temperature: 0Grad ~ 40Grad . Humidity: 5% ~ 95% (non-condensing)

ZTE FTTH GPON C320 Main control card für Chassis, support 10GE uplinkport, SMXA/3

ZTE FTTH GPON C320 AC Netzteil

ZTE FTTH GPON C320 modulares Chassis

GPON customer-premises equipment (CPE) with WiFi6 support. (1) GPON port Integrated 4-port GbE switch Integrated WiFi 6 Note: This device is only compatible with the UFiber OLT. It cannot be used with third-party OLTs.     Technical Specifications Mechanical Dimensions 140.8 x 141.5 x 31.65 mm (5.54 x 5.57 x 1.25") Weight 415 g (0.99 lb) Enclosure material UV-stabilized polycarbonate Hardware Processor Dual-core MIPS 1004 Kc at 900 MHz Memory 256 MB RAM Total non-blocking line rate 2.488 Gbps downstream 1.244 Gbps upstream Networking interfaces (1) SC/APC, ITU-G.984 GPON WAN port (4) GbE RJ45 LAN ports WiFi 802.11ax 5/2.4 GHz channels PoE interface (1) PoE in, 24V passive PoE Management interface Ethernet in-band PON Button Factory-reset Max. power consumption 11W Power method USB-C 5VDC, 3A 24V passive PoE, 0.5A Power supply 5VDC, 3A power adapter, 1.5 m cord (included) Passive PoE 2-pair (4, 5+; 7, 8-) Supported voltage range 10 to 30VDC passive PoE 5VDC adapter Normal TX range of optical module 0.5 to 5 dBm Normal RX range of optical module -8 to -28 dBm Max. WiFi TX power 2.4 Ghz 5 Ghz 20 dBm 20 dBm MIMO 2.4 Ghz 5 Ghz 2 x 2 2 x 2 Max. WiFi radio rate 2.4 Ghz 5 Ghz 300 Mbps 1.2 Gbps Antenna Gain 2.4 GHz 5 GHz 1 dBi 3 dBi Operating temperature -15 to 45° C (5 to 113° F) Operating humidity 10 to 90% noncondensing Certifications FCC, IC, CE LEDs PON status (3) signal LEDs All-OFF: bootup 1x orange: signal too low (< -28 db) 1x white: signal low (>= -28 db) 2x white: signal good (>= -25 db) 3x white: signal strong (>= -11 db) 1x orange + 2x white: signal too strong (>= -8 db) 3x orange: no signal LEDs alternate between orange + white + orange and a signal strength indicator: No authority Ethernet Steady white: link up Blinking white: activity OFF: link down Power White: ON Software Mode ONU/ONT layer 2/3 Ethernet switch Services Web server, telnet, NAT, bridging and routing, firewall features, and application passthrough features Utilities Dashboard, monitoring, alarms, and logs Other Remote reset, remote reboot, remote firmware upgrade, VLAN support Security GEM Port Encryption Ubiquiti specific features UISP Mobile App WiFi standards 802.11 b/g WiFi 4/WiFi 5/WiFi 6 Wireless security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3, TKIP/AES) Fiber Operating wavelength 1310 nm TX/1490 nm RX Optical interface downstream nominal bit rate 2488.32 Mbit/s Optical interface upstream nominal bit rate 1244.16 Mbit/s Physical reach 20 km Supported Data Rates 802.11b 1, 2, 5.5, 11 Mbps 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n (WiFi 4) 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) 802.11ac (WiFi 5) 6.5 Mbps to 866.7 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) 802.11ax (WiFi 6) 8.6 Mbps to 1.2 Gbps (MCS0 - MCS11 NSS1/2, HE 20/40/80)

ZTE FTTH C600/C650 Zubehör 16 Port GPON OLT Line Card

ZTE FTTH GPON OLT CLASS B+ Transceiver SFP für C610 System

ZTE FTTH C600 Zubehör System control und Switch Card Type L

ZTE FTTH C600 21 inches optical fiber wiring box (front mounting)

ZTE fiber jumper 5m (single mode)

Software license for resale - no copyright transfer ZTE FTTH GPON C610 Basic Software - V.1.1

ZTE 10Gb/1310nm SFP+ single mode Optical Transceiver Module 10KM

ZTE FTTH C600 Zubehör Fiber Wiring Box (Frontmontage)

ZTE FTTH GPON OLT CLASS C+ Transceiver SFP für C610 System

Power Cable for 5260 Switch

ZTE FTTH GPON F680 V9.0 Wi-Fi AC DualBand Gateway mit 1x GPON Eingang - 4x RJ-45 Gigabit - 2x RJ-11 VOIP und 2x USB Ports • 1 SC/APC connector for GPON • 4 RJ-45 ports for GE interface • 2 RJ-11 ports for VoIP • 2 USB ports (1x USB2.0, 1x USB 3.0) Wi-Fi: - Interne WLAN Antennen - Frequency: 2.4 GHz, 5GHz - IEEE 802.11a/n/ac Wi-Fi @ 5GHz(4x4) - IEEE 802.11b/g/n Wi-Fi @ 2.4GHz(4x4 - MU-MIMO - Beamforming - WEP/WPA/WPA2 Security . Humidity: 5% ~ 95% (non-condensing)

ZTE GPON C320 System mit 1x 16 Port Line Card (Class B+) AC Netzteil (Erweiterbar um weitere Linecards) Set besteht aus: 1x ZTE OPT GPON modulares Chassis, C320/E, C320 Chassis/E 1x ZTE OPT GPON zub. Main control card für Chassis, support 10GE uplinkport, SMXA/3 1x ZTE OPT 320 zub. 16 ports GPON OLT line card Type K (with 16 B+ T/R modules) 16x Module 16B+ inklusive 1x ZTE OPT 320 zub. XA10 C320 basic software package 1x ZTE OPT GPON ZXA10 C320 AC Power card Das System kann um eine weitere 16 Port GPON Linecard erweitert werden (Endausbau 32 Ports GPON) Es können insgesamt 2 Main Controller Karten verbaut werden, für die Redundanz (Stromversorgung AC/DC und Controller).

ZTE FTTH C600/C650 Zubehör 8 Port 10GB SFP+ Uplink Karte XFTO

ZTE FTTH C600 Zubehör Basic Software Packet

ZTE fiber jumper 5m (single mode)

ZTE FTTH C600/C650 Zubehör DC Netzteil Karte Type R PRVR

ZTE 16 XGS-PON N1 Transceiver SFP+

ZTE FTTH C600 GPON und P2P 19" Chassi System mit 11U (Höheneinheiten) 11 Höheneinheiten 15 Slots für Line Cards Für GPON,XG-PON, XGS-PON, Active Ethernet CSFP P2P Karten Maximaler Ausbau: 720 GE P2P Ports oder 240 GPON Ports 7.2Tbit/s system switching capacity(unidirection) Folgende Line Cards können verbaut werden: PFEK (24x CSFP P2P GE/FE or 24 GE SFP/FE SFP interfaces card) GFGH (16-port GPON CO-end line card) GFXH (16-port XG-PON CO-end line card) GXFO (8-port XG-PON CO-end line card) GFTH (16-port XGS-PON CO-end line card) GFTO (8-port XGS-PON CO-end line card) GFBH (16-port GPON & XG-PON Combo CO-end line card) Uplink Karten: XFTO (8-port 10GE optical interface, Ethernet interface card) XFTH (16-port 10GE optical interface, Ethernet interface card) Maße: 486.1 mm x 535 mm x 288.5 mm (H x W x D)

ZTE FTTH GPON Switch OLT C610 SET 16 Ports Ausgelegt für bis zu 1024 FTTH Anschlüsse (1:64 split Verhältnis) 1x Chassi System 1x DC Netzteil 1x 16 Port GPON Linecard und Control Card 1x Lüfter Uplink: 4* SFP+ und 2* SFP • 1U(Height), 43.6 mm x 442 mm x 220 mm (H x W x D), 43.6 mm x 482.6 mm x 220 mm (H x W x D, including mounting ears of IEC standard).