VDSL2 Pair of Modems for dedicated lines via 2-wire connections up to a length of 2.5km and a bandwidth of max. 100 Mbps   HIGHLIGHTS VDSL2 standard for high data throughput Integrated 4-Port Ethernet 10/100Mbps Switch Two RJ11 ports for phone/line Integrated DSL-splitter and surge protection Flexible VDSL bandplan-profiles Automatic speed adjustment for VDSL2-Port Configuration via webbrowser and/or RS232C console port Configurable as router or switch Energy saving, low power consumption (only about 6.9W) Advanced VDSL technology from Infineon® for up to 100 Mbps/symm. Diagnostic function for line quality Private point-to-point-operation or public DSL-provider-connection Connection via twisted 2-wire-phonecable Simultaneous telephony for analog or UK0 (ISDN) on the same wire Bracket for wall mounting Via the ALLNET ALL126AM2 VDSL master modem in conjunction with the ALLNET ALL126AS3 VDSL slave modem dedicated lines can be realized by a simple 2-wire copper cable with a length of up to 5 kilometers. For short distances bandwidths of up to 100 Mbps are possible.At the same time analog telephones can be connected and operated on the same line. An existing telephone wiring can thus also be used for data services with high performance.Specially designed for hotels and hospitals, this technology represents the optimal solution cost, to provide performant network applications with minimal effort.   Technical Details: Element Specification Chipsets: Lantiq MIPS ADM5120P Lantiq VINAX Standards: IEEE802.3/802.3u standardsITU-T G993.2 VDSL2 standard Interface: 4x RJ-45 10/100Mbps Auto-Negotiation RJ-45 Ethernet port 1x RJ-11/Terminal Block connector for VDSL2 line port 1x RJ-11 connector for POTS/ISDN device Band Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a Band Plans: 997, 998 Max. Bandwidth: Symmetric 100 Mbps/300m LED-Indication: Power LED 4x Link/Active Status for Ethernet Port Link LED for VDSL2 Port Switch method: Store and forward Management and Features: - Provides POTS/ISDN Splitter on board- Supports Downstream Power Back-Off (DPBO)- Supports auto speed for VDSL2 port- Supports Web management (HTTP), TFTP, Console (RS232)- Supports uPnP/PPPoE/NAT/DHCP/DMZ/Firewall- Supports Router & Switch (Bridge) mode- Supports Loop back test- Supports SNR indicator for check phone wiring quality- Supports Interleave delay for Data Error & Noise Against- Provides surge protection for VDSL2 port Console Port: RS-232C/115200bps Flow control: Full duplex: IEEE 802.3x Half duplex: Back pressure Power Consumption: 5.52W - 6.12W Environment: Temperatur Operating: 0°C ~ 50°C (32°F ~ 122°F)Temperatur Storage: -20°C ~ 70°C (-4°F ~ 150°F)Humidity: 10 to 90% (non-condensing) Dimensions: Width/Height/Depth: 183 x 36 x 145 mm (7.2“ x 5.74“ x 1.57“)Weight: 0,385kg (without power supply) Mark: CE Package contents: - ALL126AM2 VDSL Master Modem- ALL126AS3 VDSL Slave Modem - each Power Supply 12V/1A- each CD with manual (english)- each 1 Patch cable LAN & each 1 Patch cable phone (Western connector)

- Bundle consists of 2x Master/Slave Modem ALL-MC116VDSL2 - Point-to-point distance up to 1km - For short distances data rates of up to 100Mbit/s possible - NEW: GBIC slot for optional miniGBICS (fibre / copper / 2-wire etc.) DIP switch 1 must be set to ON "up" for the master and OFF "down" for the slave.

- Bundle consists of 1x ALL-MC116VDSL2 which must be set as master "CO DIP switch + 1x slave modem ALL-MC116SPV which must be set as slave "CPE DIP switch". - Point-to-point distance up to 1km - Data rates of up to 100Mbit/s possible for short distances - NEW: GBIC slot for optional miniGBICS (fibre / copper / 2-wire etc.) DIP switch 1 must be set to ON "top" on the master and OFF "bottom CPE" on the slave

VDSL2 modem pair for leased lines over 2-wire connections up to a length of max. 2500 meters and a bandwidth of max. 100 Mbit/s (depending on length) Bundle consists of 1x master modem ALL126AM3 and 1x slave modem ALL-BMI100VDSL2V Highlights:     Point-to-point distance up to 2.5km     For short distances data rates up to 100Mbit/s possible     Slave modem with extended temperature range (-20°C ~ +70°C) and DIN-rail mounting     Slave modem has the option to be powered with extended current input range with redundant current input.     More info see datasheets of part.149851 & part. 172755