Server

Highlights: The PCIe x4 AQC107S 10GbE Ethernet card is a high-performance, multi-gigabit Ethernet card that supports the 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-T, the AQtion Ethernet controller easily handles the 10GbE Line-rate performance.  The AQC107 incorporates Aquantia’s AQrate PHY technology which delivers 10GbE network connectivity speed through Cat 6a, and delivers 5 GbE and 2.5 GbE network connectivity speed through 100 meters of Cat 5e or better cabling enabling higher data rates with zero change to legacy cabling. FEATURES - Compliant with PCIE Express Revision 3.0 and downstream with PCI Express Reivison 2.0 - Supports line rate of 8.0GT/s and 5.0GT/s per lane - Supports communication and management function - Integrated Aquantia AQrate PHY featuring NBASE-T technology - Supports PHY specifications with 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T /100BASE-T. - On-chip high resolution cable analyzer for advanced cable diagnostics - Energy Efficient Ethernet (EEE) Support - Supports IEEE1588v2 Precision Time Protocol - Support large send offload, Receive Side Scaling (RSS), Direct Cache Access (DCA) and Header checksum for increased network performance and lower host CPU utilization - Supports IPv4, IPv6 and IPv6/UDP checksum offload - Supports Jumbo frame (up to 16kbytes) - Quality of Service (QoS) - Supports up to eight traffic classes and Data Center Bridging (DCB) Target Applications - Marvell AQtion power leading -edge solutions for motherboards, PCs, Workstations, docking station, NAS, Router, Gateways and other embedded applications System Requirements - Drivers: Windows 10/8.1/8/7, Linux 3.10 and higher - Utilities: ROM programming and Windows Installer - Boot Options: UEFI and PXE Technical Details: Essentials Product Collection Network 10G mGig Controller Processors Marvell AQC107S Bus Type PCI Express Gen 3x2 or Gen 2x2 Data Rate 5-Speeds: 10G/5G/2.5G/1G/100M  Media Copper 100 meters over Cat 6a at 10Gbps 100 meters over Cat 5e (or better) at 5Gbps/2.5Gbps/1Gbps/ 100Mbps (requires no change to existing infrastructure or cabling) Boot Options UEFI and PXE Bracket Full-height bracket installed. Low-profile bracket included in package Dimension 79 mm x 68 mm (PCIe Board) Technical Specifications Network protocol IEEE802.3an, IEEE802.3bz, IEEE802.3ae, IEEE1588v2, IEEE802.3ab, IEEE802.3z, IEEE802.3u Jumbo frames 16Kbytes IPv4/IPv6 Flow Control Support Boot Options UEFI and PXE System Requirements Windows Client Windows 10/ 8.1/ 8/ 7, Windows Sever 2012/ 2012 R2/ 2016/ 2019 Apple device Mac OS  Linux Client Linux kernel: 2.6.32/3.x/4.x or higher, Linux CentOS/RHEL6.5/7.X or higher, Ubuntu: 14.x/15.x/16.x or higher, VMware: ESX/ESXi 4.x/5.x/6.x or higher Environment & Certification Power Consumption Max. 3.8W at 10Gbps, 3.0W at 5Gbps Storage Humidity Maximum 90% non-condensing relative humidity at 35 °C Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F) Operating Temperature 0 °C to 55 °C (32 °F to 131 °F) LED Indicators LINK (solid) and ACTIVITY (blinking) LINK S PEED ( green=10 G bps; yellow=1 G bps) Marks CE FCC RoHS

Processor CPU Integrated Intel® Celeron 3855U dual core 2 thread processor Frequency 1.6GHz Power TDP 15W Chipset Based on Intel® skylake-u SOC platform BIOS 64Mb Flash ROM RAM RAM DDR4 2133MHz Max Capacity 32GB Slot 2*SODIMM Display Graphics Intel® HD Graphics 510 Graphics Engine DirectX12,OpenGL4.4 HDMI N/A CRT 1*VGA ,1920X1200@60Hz Display 1*VGA Ethernet LAN1~LAN4 4*Intel WGI211AT Gigabit Ethernet, support Wake On LAN/PXE LAN5~LAN6 2*Intel WGI211AT Gigabit Ethernet,, support network wake up, PXE/ POE function Audio Audio N/A I/O Port COM Port 1* CISCO standard RS232 serial  USB 2* USB2.0 Optical fiber N/A Phoenix Connector N/A Expansion Mini PCIE 1* Mini PCIE slot,support WIFI module Storage SATA 1*2.5”HDD Expansion or 1*3.5”HDD Expansion MSATA 1* MSATA SSD, transmission rate up to 3Gbps OS Support Microsoft Windows Windows 7/Windows10,64bit(not include OS code) Linux Ubuntu Power Supply Power Type External open power supply Voltage Input AC 110~220V Power Output AC TO DC,60W Structure Structure 1U standard case, high quality galvanized steel Installation 1U standard rack Dimension 430mm*281mm*45mm Environment Working Temp. -10°C ~ 60°C Storage Temp. -20°C ~70° C Relative Humidity 5%-95% relative humidity, non-condensing Working Vibration 0.5g rms/5-500HZ/random/operating  

Highlights: Quad-port 10GbE SFP+ server adapters PCI Express (PCIe) v3.0, 8.0 GT/s, x8 lanes SFP+ connectivity PXE,iSCSI boot Network Virtualisation IEEE 802.1q and 10G Ethernet specification compliance Data Plane Development Kit (DPDK) support Excellent small packet performance for network appliances and Network Functions Virtualisation (NFV) Low Profile and Full-Height bracket ATTENTION: Only works ONLY with INTEL-compatible SFP+ modules, see accessories. Overview:                                        ALL0141-4SFP+-10G is  ALLNET  a  new generation  of high- performance  server  adapter,  based  on  the  Intel  XL710-BM1  controller.  The  Server  Adapter  addresses  the demanding  needs  of  the  next-generation  agile data centre by providing unmatched features for both server and network  virtualisation,  flexibility  for  LAN  and  SAN networks and proven, reliable performance. The ALL0141-4SFP+-10G adapter delivers superior performance  in  a  PCI  Express  v3.0  x8  slot.  Optimised performance vectors and key uses include: Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>128 Bytes for 40 GbE and >64 Bytes for 10 GbE) Bulk transfer performance: Delivers line-rate performance with low CPU usage for large application buffers Network Virtualisation: Network virtualisation overlay offloads including Geneve, VXLAN, and NVGRE Storage performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Key Features                                  Quad –Port 10GbE Server Adapter PCI Express* (PCIe) 3.0, x8 Exceptional Low Power Adapters Network  Virtualisation  offloads  including  Geneve, VXLAN and NVGRE Intel® Ethernet Flow Director for hardware based application traffic steering Intel® Data Plane Developer Kit (DPDK) optimised for efficient packet processing Excellent small packet performance for network appliances and Network Function Virtualisation (NFV) Intelligent offloads to enable high performance with Intel® Xeon® processor-based servers I/O virtualisation innovations for maximum performance in a virtualized server Unified networking providing a single wire support for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI, FCoE) A Complete, Unified Networking Solution Converging data and storage onto one fabric eliminates the need for multiple adapters, cables and switches. Furthermore, both 10 and 40 gigabit Ethernet provides the bandwidth to converge these multiple fabrics onto a single wire. A key capability that makes all this possible is traffic class separation provided by Data Centre Bridging (DCB) providing a one-wire solution with virtual pipes for the different classes of traffic: Data: Best effort delivery of standard LAN traffic Storage: Lossless network for FCoE and iSCSI Management: Guaranteed connectivity of data centre IP management Power Savings  Power efficiency is critical to IT specialists as energy consumption is a real OpEx concern. Lowest Power Consumption The new generation of ALL0141-4SFP+-10G adapters are power  misers.  They  deliver  double  the  throughput  with only half the power of the previous Energy Efficient Ethernet (EEE) Reduces power consumption during periods of low data activity.  Energy  is  used  to  maintain  the  physical  layer transmitters in a "ready state” to transmit data on the wire. During periods of low data traffic, EEE sends a low-power idle signal to put the transmitters into a "low power state” saving power and cost. When data needs to be sent, EEE sends a normal idle signal to wake up the transmit system before data is due to be sent so there is no degradation of performance. Server Virtualisation                    With the INTEL Virtualisation Technology (VT), the ALL0141-4SFP+-10Gadapter deliver outstanding I/O performance  in  virtualized  server  environments.  They reduce I/O bottlenecks by providing intelligent offloads for networking traffic per virtual machine (VM), enabling near-native  performance  and  VM  scalability.  The  host-based virtualisation technologies supported by Intel VT include: VMDq for Emulated Path: Adapter-based VM queue sorting enabling efficient hypervisor-based switching SR-IOV for Direct Assignment: Adapter-based isolation and switching for various virtual station instances enabling optimal CPU usage in virtualised environments.  Additionally,  ALL0141-4SFP+-10G provide Virtual Bridging support that delivers both host-side and switch-side control and management of virtualised I/O as well as the following modes of virtualized operation: VEPA : IEEE 802.1Qbg support for Virtual Ethernet Port Aggregator VEB: Virtual Ethernet Bridge support via Intel® VT Network Virtualisation                  Network virtualisation is the next big trend in creating an agile data centre.   The   ALL0141-4SFP+-10Gadapter is ready to help you take that next step. VXLAN, NVGRE, GENEVE Offloads: With Intel Virtualisation Technologyperformance for overlay networks. With these offloads it is possible to distribute network traffic across CPU cores. At the same time XL710 offloads LSO, GSO, and check-sum from the host software reducing CPU overhead. Intel® Ethernet Flow Director        Flow Director is an advanced traffic steering capability built  into  the  XL710  controller.  It  consists  of  a  large number of flow affinity filters that direct receive packets by their flows to queues for classification, load balancing, and matching between flows and CPU cores. It eliminates context  switching  required  within  the  CPU.  As  a  result, Flow Director significantly increasing the number of transactions per second and reduces latency for cloud applications like Memcached. Intelligent Offloads                                     The Intel Xeon processor family has demonstrated increased computing performance and increased integration of key server subsystems generation after generation. To offload is to leverage the ever-escalating computing power of the Xeon processor where appropriate and implementing complementary accelerations in the network controller—this is what Intel refers to as ”intelligent offloads.” By employing a balanced hybrid of compute  and  offload,  intelligent  offloads  are  able  to achieve the optimised point of performance and efficiency. This is most notably observed in the following usage models: TCP Stateless Offloads: Demonstrates  leading  performance  vs.  TOE  solutions without restricting feature usage (TOE usage usually requires  that  key  features  be  disabled).  Supported stateless offloads include Checksum, TSO, VMDq, and RSS. Host iSCSI /FCoE Initiators: Providing exceptional performance without the need for full-offload HBA2 methods. Flow Classification: Trafficking data flows across multiple consumers and connections. Manageability                                              ALL0141-4SFP+-10Galso incorporate the manageability required by IT personnel for remote control and alerting. Communication to the Board Management Controller (BMC) is available either through an on-board SMBus port or the DMTF-defined NC-SI, providing a variety of management protocols,  including  IPMI,  BMC  Pass-thru,  OS2BMC,  and MCTP/SMBus and MCTP/PCIe. Features General Intel® XL710-BM1 40 Gigabit Ethernet Controller SFP+ Connectivity Low-profile full-height Load balancing on multiple CPUs iSCSI remote boot support Fibre Channel over Ethernet (FCoE) support Support for most network operating systems RoHS-compliant Intel® PROSet Utility for Windows*Device Manager Time Sync (IEEE 1588*, 802.1as) I/O Features for Multi-core Processor Servers Intel® Flow Director MSI-X support Multiple queues: 1,536 Tx and Rx queues per port Tx/Rx  IP,  SCTP,  TCP,  &  UDP  checksum  offloading  (IPv4, IPv6) capabilities Virtualisation features                                Next-Generation VMDq Up to 256 maximum VMDq VMs supported PCI-SIG SR-IOV implementation (128 per device) Virtual Machine Load Balancing(VLMB) Advanced Packet Filtering VLAN  support  with  VLAN  tag  insertion,  stripping  and packet filtering for up to 4096 VLAN tags VXLAN and NVGRE Support Manageability Features                               Preboot Xecution Environment (PXE) support Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) Statistic Counters iSCSI Boot Watchdog Timer Adapter Product Features                           Intel® PROSet Utility Plug and play specification support Receive Side Scaling Advanced Software Feature                       Adapter fault tolerance (AFT) Switch fault tolerance (SFT) Adaptive load balancing (ALB) Teaming support IEEE 802.3ad (link aggregation control protocol) PCIe Hot Plug*/Active Periphera component interconnect (PCI) IEEE 802.1Q* VLANs IEEE 802.3 2005* flow control support Tx/Rx  IP,  TCP,  &  UDP  checksum  offloading  (IPv4,  IPv6) capabilities  (Transmission  control  protocol(TCP),  user datagram protocol (UDP), Internet protocol (IP) IEEE 802.1p* TCP segmentation large send offload MSI-X supports Multiple Independent Queues interrupt moderation Ipv6 offloading — Checksum and segmentation capability extended to new standard packet type Network Operating Systems (NOS) Software Support Windows Server* 2012 R2; Windows Server 2012 R2 Core; Windows Server 2012; Windows Server 2012 Core; Windows Server 2008 R2; Windows Server 2008 R2 Core; Linux* Stable Kernel version 2.6.32/3x; Linux* RHEL 6.5 and RHEL 7.0; Linux* SLES 11 SP3 and SLES 12; FreeBSD* 9 and FreeBSD* 10; UEFI* 2.1; UEFI* 2.3; VMware ESXi 5.1 (Limited Functionality); Vmware ESXi 5.5 Technical details: Controller Intel XL710 Transmission Rate Per Port 10000Mbps Network Standard Physical Layer Interfaces 10GBASE-SR, 10GBASE-LR Jumbo frame support Up to 9.5 KB Operating Temperature 0? to 55?(32°F to 131°F) Network Virtualisation VLAN, VLAN tag, VXLAN, NVGRE, GENEVE,VLMB LED indicators Link Yellow,10Gb/s:Green blinking SYSTEM SUPPORT Windows Server 2008 R2 / 2012 / 2012 R2 / 2016 R2 Windows 7 / 8 / 8.1 / 10 FreeBSD 11.0or later Linux SLES 11 / 12or later Linux Stable Kernel version 2.6.x/3.x/4.x or later VMware ESX/ESXi 5.x/6.x or later

Dual- and Quad-port Gigabit Ethernet server adapters designed with performance enhancing features and new power management technologies Overview The ALL0136v2-4-GB-TX Intel Ethernet Server Adapter I350 family, these adapters represent the next step in the Gigabit Ethernet (GbE) networking evolution for the enterprise and data center by introducing new levels of performance through industry-leading enhancements for both virtualized and iSCSI Unified Networking environments. This new family of adapters also includes new power management technologies such as Energy Efficient Ethernet (EEE) and DMA Coalescing (DMAC). Key Features -- Dual - or Quad -port Gigabit Ethernet adapters with copper or fiber interface options -- Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescing for increased efficiency and reduced power consumption -- Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 32 virtual ports -- Scalable iSCSI performance delivering cost-effective SAN connectivity -- High-performing bridgeless design supporting PCI Express* Gen 2.1 5GT/s -- Reliable and proven Gigabit Ethernet technology from Intel Corporation   Essentials Product Collection Intel I350 Ethernet Server Adapter  Controller Processors Intel NHI350AM4 Bus Type/Bus Width PCI Express* 2.1 (5 GT/s) x4-lane, operable in x4, x8 and x16 slot Connections 4 x RJ-45 (Copper) Data Rate Supported 10/100/1000 Mbps (Copper), 1000 Mbps (Fiber) Cable Distances Copper: up to 100 m Category-3 or higher for 10BASE-T operation Category-5 or higher for 100BASE-TX operation Category-5e or higher for 1000BASE-T operation Fiber: MMF 62.5/50 um Bracket Full-height bracket installed. Low-profile bracket included in package Dimension 130 mm x 69 mm (PCIe Board) Technical Specifications IEEE standard Network topology IEEE 802.3/10BASE-T, 100BASE-TX, 1000BASE-T IEEE* 802.3 Auto-negotiation 1Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY specifications Compliant Integrated PHY for 10/100/1000 Mb/s for multispeed, fulland half-duplex IEEE 802.3x and 802.3z compliant flow control support with software-controllable Rx thresholds and Tx pause frames Automatic cross-over detection function (MDI/MDI-X) IEEE 1588 protocol and 802.1AS implementation ? Interrupt Levels INTA, INTB, INTC, INTD, MSI, MSI-X System Requirements Windows Client Windows 11/ 10/ 8.1/ 8/ 7 Windows Sever 2008 R2/ 2012/ 2012 R2/ 2016/ 2019/ 2022 Linux RHEL7.9/ 8.4/ 8.5, SLES12SP5, SLES15SP3, Ubuntu18.04LTS/ 20.04LTS, FreeBSD 12.2/ 13 Environment & Certification Power consumption (typical) Copper: I350T2V2 4.4 W I350T4V2 5.0 W Fiber: I350F2 5.5 W I350F4 6.0 W Storage Humidity Maximum 90% non-condensing relative humidity at 35 °C Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F) Operating Temperature 0 °C to 55 °C (32 °F to 131 °F) Connect Speed LED Indicators Not illuminated=10 Mb/s; green=100 Mb/s; amber=1 Gb/s (Copper) ? Green=1 Gb/s. Not illuminated=no link (Fiber) Certifications CE FCC RoHS

ALLNET ALL0140-2SFP+-10GPCI Express v3.0 x8 Dual Port SFP+ 10 Gigabit Server Adapter (Intel X710- BM2 Based)Overview: ALL0140-2SFP+-10Gis ALLNET a new generation of high-performance server adapter, based on the Intel X710-BM2 controller. The Server Adapter addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The ALL0140-2SFP+-10Gadapter delivers superior performance in a PCI Express v3.0 x8 slot. Optimized performance  vectors and key uses include:•Small Packet Performance:  Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE)•Bulk Transfer Performance:  Delivers line-rate performance with low CPU usage for large application buffers •Network Virtualization:  Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE•Storage Performance:  Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Key Features • Dual –Port 10GbE Server Adapter • PCI Express* (PCIe) 3.0, x8 • Exceptional Low Power Adapters • Network Virtualization offloads including Geneve, VXLAN  and NVGRE • Intel® Ethernet Flow Director for hardware based application traffic steering • Intel® Data Plane Developer Kit (DPDK) optimized for efficient packet processing • Excellent small packet performance for network appliances and Network Function Virtualization (NFV) • Intelligent offloads to enable high performance with Intel® Xeon® processor-based servers • I/O virtualization innovations for maximum performance in a virtualized server • Unified networking providing a single wire support for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI, FCoE) A Complete, Unified Networking Solution Converging data and storage onto one fabric eliminates the need for multiple adapters, cables and switches. Furthermore 10 gigabit Ethernet provides the bandwidth to converge these multiple fabrics onto a single wire. A  key capability that  makes all this possible is traffic class separation provided by Data Center Bridging (DCB) —providing  a one-wire solution with virtual pipes for the different classes of traffic: • Data: Best effort delivery of standard LAN traffic • Storage: Lossless network for FCoE and iSCSI • Management: Guaranteed connectivity of data center IP management Power Savings Power efficiency is critical to IT specialists as energy consumption is a real OpEx concern.• Lowest Power Consumption The new generation of ALL0140-2SFP+-10Gadapters are power misers. They deliver double the throughput with only half the power of the previous ALL0140-2SFP+-10G• Energy Efficient Ethernet (EEE) Reduces power consumption during periods of low data activity. Energy is used to maintain the physical layer transmitters in a "ready state” to transmit data on the wire. During periods of low data traffic, EEE sends a low-power-idle signal to put the transmitters into a "low power state” saving power and cost. When data needs to be sent, EEE sends a normal idle signal to wake up the transmit system before data is due to be sent so there is no degradation of performance. Server Virtualization With Intel Virtualization Technology (VT), the ALL0140-2SFP+-10Gdeliver outstanding I/O performance in virtualized server environments. They reduce I/O bottlenecks by providing intelligent offloads for networking traffic per virtual machine (VM), enabling near-native performance and VM scalability. The host-based virtualization technologies  supported by Intel VT include:• VMDq for Emulated Path: Adapter-based VM Queue sorting enabling efficient hypervisor-based switching• SR-IOV for Direct Assignment:   Adapter-based isolation and switching for various virtual station instances enabling optimal CPU usage in virtualized environments. Additionally, ALL0140-2SFP+-10G provide Virtual Bridging support that delivers both host-side and switch-side control and management of virtualized I/O as well as the following modes of virtualized operation:VEPA : IEEE 802.1Qbg support for Virtual Ethernet Port AggregatorVEB: Virtual Ethernet Bridge support via Intel® VT Network Virtualization Network virtualization is the next big trend in creating an agile data center.  The ALL0140-2SFP+-10Gadapter is ready to help you take that next step.• VXLAN, NVGRE, GENEVE Offloads:  These stateless offloads preserve application performance for overlay networks. With these offloads it is possible to distribute network traffic across CPU cores. At the same time X710 offloads LSO, GSO, and check-sum from the  host software reducing CPU overhead. Intel® Ethernet Flow Director Flow Director is an advanced traffic steering capability built into the X710 controller. It consists of a large number of flow affinity filters that direct receive packets by their flows to queues for classification, load balancing, and matching between flows and CPU cores. It eliminates context switching required within the CPU. As a result, Flow Director significantly increasing the number of transactions per second and reduces latency for cloud applications like Memcached.Intelligent Offloads The Intel Xeon processor family has demonstrated increased computing performance and increased integration of key server subsystems generation after generation. To offload is to leverage the ever-escalating computing power of the Xeon processor where appropriate and implementing complementary accelerations in the network controller—this is what Intel refers to as ”intelligent offloads.” By employing a balanced hybrid of compute and offload, intelligent offloads are able to achieve the optimized point of performance and efficiency. This is most notably observed in the following usage models:• TCP Stateless Offloads:  Demonstrates leading performance vs. TOE solutions without restricting feature usage (TOE usage usually requires that key features be disabled). Supported stateless offloads include Checksum, TSO, VMDq, and RSS.• Host iSCSI /FCoE Initiators:  Providing exceptional performance without the need for full-offload HBA2 methods.• Flow Classification:  Trafficking data flows across multiple consumers and connections. Manageability ALL0140-2SFP+-10Galso incorporate the manageability required by IT personnel for remote control and alerting.  Communication to the Board Management Controller (BMC) is available either through an on-board SMBus port or the DMTF-defined NC-SI, providing a variety of management protocols, including IPMI, BMC Pass-thru, OS2BMC, and MCTP/SMBus and MCTP/PCIe. FEATURES General Intel® X710-BM2 10 Gigabit Ethernet Controller SFP+ Connectivity Low-profile Full-height Load balancing on multiple CPUs iSCSI remote boot support Fibre Channel over Ethernet (FCoE) support Support for most network operating systems RoHS-compliant Intel® PROSet Utility for Windows*Device Manager Time Sync (IEEE 1588*, 802.1as) I/O Features for Multi-core Processor Servers Intel® Flow Director MSI-X support Multiple Queues: 1,536 Tx and Rx queues per port Tx/Rx IP, SCTP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities Virtualization Features Next-Generation VMDq Up to 256 maximum VMDq VMs supported PCI-SIG SR-IOV Implementation (128 per device) Virtual Machine Load Balancing(VLMB) Advanced Packet Filtering VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags VXLAN and NVGRE Support Manageability  Features Preboote Xecution Environment (PXE) Support Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) Statistic Counters iSCSI Boot Watchdog Timer Adapter Product Features Intel® PROSet Utility Plug and play specification support Receive Side Scaling Advanced Software Feature Adapter fault tolerance (AFT)           Switch fault tolerance (SFT) Adaptive load balancing (ALB) Teaming support IEEE 802.3ad (link aggregation control protocol) PCIe Hot Plug*/Active Periphera component interconnect (PCI) IEEE 802.1Q* VLANs IEEE 802.3 2005* flow control support Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol(TCP), user datagram protocol (UDP), Internet protocol (IP) IEEE 802.1p* TCP segmentation large send offload MSI-X supports Multiple Independent Queues Interrupt moderation IPv6 offloading — Checksum and segmentation capability extended to new standard packet type Network Operating Systems (NOS) Software Support Windows Server* 2012 R2;  Windows Server 2012 R2 Core; Windows Server 2012;  Windows Server 2012 Core;  Windows Server 2008 R2;  Windows Server 2008 R2 Core;  Linux* Stable Kernel version 2.6.32/3x;  Linux* RHEL 6.5 and RHEL 7.0;  Linux* SLES 11 SP3 and SLES 12;  FreeBSD* 9 and FreeBSD* 10;  UEFI* 2.1; UEFI* 2.3;  VMware ESXi 5.1(Limited Functionality); VMware ESXi 5.5 Specifications General Connections Dual SFP+ cages for: • SFP+ SR fiber-optic transceivers • SFP+ LR fiber-optic transceivers • SFP+ Direct Attach cables Network Standard IEEE 802.3 Physical Layer Interface 10GBASE-SR (LRXP8510-X3ATL) 10GBASE-LR (LRXP1310-10ATL) SFF-8431: 10GSFP+ DAC (Direct Attach Copper) Technical Features Data rate supported per port • Optical: 1 GbE/10 GbE • Direct Attach: 10 GbE Bus type PCI Express 3.0 (8 GT/s) Bus Width x8 PCI Express Interrupt levels INTA, MSI, MSI-X Hardware certifications FCC, CE Controller-processor Intel® Ethernet Controller X710-BM2 Power Consumption Dual-port 10GBASE-SR Typical  Power 4.3W;  Maximum Power 4.8W Dual-port 1000BASE-SX Typical  Power 4.0W;  Maximum Power 4.3W Dual-port 10GBASE-LR Typical  Power 4.5W;  Maximum Power5.1W Dual-port Direct Attach (Twinax) Typical  Power 3.3W;  Maximum Power3.7W Air Flow Minimum of 1 50 LFM required Operating temperature 0 °C to 55 °C (32 °F to 131 °F) Storage temperature -40 °C to 70 °C (-40 °F to 158 °F) Storage humidity Maximum: 90% non-condensing relative humidity at 35 °C LED Indicators LINK (solid) and ACTIVITY (blinking) LINK SPEED (green=10 Gbps; yellow=1 Gbps) Ordering Information: M/N Description ALL0140-2SFP+-10G PCI Express v3.0 x8 Dual Port SFP+ 10 Gigabit Server Adapter (Intel X710-BM2 Based) PS: Above details are only for reference, if there are any changes, no inform will have.   ATTENTION: works only with INTEL or compatible MSA code GBICS Treiberdownload

Highlights: Chipset: Intel JL82576EB PCIExpress host interface specification v2.0 with 2.5GT/s BUS width PCIExpress lanes: x4  MDI (Copper) standard IEEE 802.3 Ethernet interface for 1000BASET, 100BASETX, and 10BASET applications (802.3, 802.3u, and 802.3ab) SerializerDeserializer (SERDES) to support 1000BaseSX/X/LX (optical fibre) for Gigabit backplane applications. Layer 2 functions: IEEE 802.3x Flow Control IEEE 802.1q VLAN Supports Receiveside scaling (RSS) Supports IPv 4, IPv 6 protocols Supports Jumbo Frames up to 9.5K Supports UDP.TCP and IP Checksum offloading  Statistics for management and RMON Support for virtual machines device queues Queues per port: 16 TX queues and 16 RX queues FullSpectrum Security Next generation VMDq support (8VMs) Interrupt throttling control to limit maximum interrupt rate and improve CPU usage The PCIe* v2.0 (2.5GT/s) Intel 82576 GbE Network adapter is a single, compact, low power component that offers two fullyintegrated Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports.  The 82576 enables twoport implementation in a relatively small area and can be used for server system configurations such as rack mounted or pedestal servers, where the 82576 can be used as addon NIC or LAN on Motherboard (LOM) design.  Another system configuration is blade servers, where it can be used as LOM. The 82576 can also be used in embedded applications such as switch addon cards and network appliances. Technical Details: Essentials Product Collection Intel GbE Ethernet Server Adapter  Controller Processors Intel JL82576EB Bus Type/Bus Width PCI Express* 2.0 (2.5 GT/s) x4-lane, operable in x4, x8 and x16 slot Connections 2 x RJ45 Copper Data Rate Supported 10/100/1000 Mbps (Copper), 1000 Mbps (Fibre) Cable Distances Copper: up to 100 m Category-3 or higher for 10BASE-T operation Category-5 or higher for 100BASE-TX operation Category-5e or higher for 1000BASE-T operation Bracket Full-height bracket installed. Low-profile bracket included in package Dimension 113 mm x 69 mm (PCIe board) Technical Specifications   IEEE standard/Network topology MDI (Copper) standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab) Interrupt Levels INTA, INTB, INTC, INTD, MSI, MSI-X System Requirements   Windows Client Windows 10/ 8.1/ 8/ 7 Windows Server 2008 R2/ 2012/ 2012 R2/ 2016/ 2019 Linux RHEL7.9/ 8.4/ 8.5, SLES12SP5, SLES15SP3, Ubuntu18.04LTS/ 20.04LTS, FreeBSD 12.2/ 13 Environment & Certification Storage Humidity Maximum 90% non-condensing relative humidity at 35 °C Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F) Operating Temperature 0 °C to 55 °C (32 °F to 131 °F) Connect Speed LED Indicators Not illuminated=10 Mb/s; green=100 Mb/s; amber=1 Gb/s (Copper) Marks CE   FCC   RoHS

ZTE Server R5300 G5/R5500 G5 Zone 3 PCIe Riser A

ZTE Server Optical module-1.25G-Multi mode-SFP-550M-LC

ZTE Server 64GB-DDR5-RDIMM-4800-2Rank-16Gb die

R5350 G5 Zone 3 PCIe Riser Card 3A4B

ZTE Server SSD-7.68TB-NVMe PCIe-2.5"-PCIE 4.0*4-Intensive read type-Samsung PM9A3-3.5-inch hard disk box

ZTE Server 100-127Vac:1000W;200-240Vac & 240Vdc:1600W

ZTE Server PCIE SAS HBA card-LSI9440-8i-SAS3408-no Cache-RAID0,1,10,5-12Gb/s

ZTE Server PCIe FC HBA-LPe32002-2x32G SFP+ -PCIe3.0x8-with optical module

ZTE Server PCIe RAID card-LSI93XX_2G-cache protection module

ZTE Server 32GB-DDR5-RDIMM-4800-1Rank-16Gb die-Micron

ZTE Server OCP NIC-I350T4OCPV3G1P5-Intel-4x1G RJ45-PCIe3.0x8

ZTE Server 32GB-DDR5-RDIMM-5600-2Rank-16Gb die-Samsung

R53G5_CWLH

ZTE Server PCIE NIC-I350-V4.0-GRT-2x1G-RJ45-PCIe3.0x8

ZTE Server 64GB-DDR5-RDIMM-5600-2Rank-16Gb die-Samsung

ZTE Server 32GB-DDR5-RDIMM-4800-2Rank-16Gb die

ZTE Server SSD-6.4TB-NVMe PCIe-2.5"-PCIE 4.0*4-Read-write hybrid-DapuStor J5300-2.5-inch hard disk box