Zubehör

IA50-U - RC circuit for troubleshooting when operating LED lamps - several RC circuits can be connected to the lamps - 0.1 micro-farad , 100 Ohm , 250V~ - reduces the flashing of the lamps when switched off.  

LED LAMP 230V AC/DC 0.40 W IA20BL-U- for control lighting, illumination or permanent illumination of the switch- in combination with rocker with an indicator

LED LAMP 230V AC/DC 0.40 W IA20WH-U- for control lighting, illumination or permanent illumination of the switch- in combination with rocker with an indicator

LED LAMP 230V AC/DC 0.40 W IA20GR-U- for control lighting, illumination or permanent illumination of the switch- in combination with rocker with an indicator

LED LAMP 230V AC/DC 0.40 W IA20RD-U- for control lighting, illumination or permanent illumination of the switch- in combination with rocker with an indicator

LÜSTER CLIMPS 24A 450V

LED LAMP 12V AC/DC 0.10W IA22WH-U- for control lighting, illumination or permanent illumination of the switch- in combination with rocker with an indicator

LED LAMP 24V AC/DC 0.20W IA21WH-U- for control lighting, illumination or permanent illumination of the switch- in combination with rocker with an indicator

TEM series box terminal CONNECTOR DOUBLE ROWPA 1.5-6mm2

CAN TERMINAL STRIPS UW15CO-U

IR SWITCH 5A 230V~ 1M EM31PW-U - IR switch - Supply: 230V~ ±10 % 50Hz - Relay: 5A / 250V~ output with high impedance  current limitation for zero crossing - Protection class: IP40 - Screw terminals: 0.75-2.5 mm2 - Detection angle: up to 110° at 20°C - Detection range: approx. 8 m at 20°C - Setting the lighting time: from  approx. 5 s to 12 min - Illumination setting: from approx. 5 to 200 Lx - Operating temperature: from 0°C to + 40°C - Not suitable for installation in boxes with a depth of  45 mm and CUBO IP20 housing - For indoor use only

- for charging electronic devices via a standard  standard USB port (compatible with Apple devices) - Power supply: 100-230 V~ 50/60 Hz - Consumption during operation:  300 mA at 100 V~/150 mA at 230 V~ - Power supply consumption 30 mV at 230 V~ - Output voltage 5 VAC (±5 %) SELV - Fluctuations in the output voltage 150 mV - Nominal output current 2.1 A (1 x 2,100 mA) (±10 %) - Useful power: maximum 77 % - Operating temperature: 0 °C/+ 45 °C (indoor use) - Protection class: IP20, only suitable for indoor use - Protection class of the device II - Overvoltage protection (EN 62109): Class III - Screw terminals max. 2.5 mm² - Device with a contact gap of min. 3 mm - Complies with EN 60950-1 and the LVD and EMC directives

CAN TERMINAL STRIPS UW15CO-U

CHANDELIER TERMINAL STRIPS 76A 450V

- for charging electronic devices via a standard  standard USB port (compatible with Apple devices) - Power supply: 100-230 V~ 50/60 Hz - Consumption during operation:  300 mA at 100 V~/150 mA at 230 V~ - Power supply consumption 30 mV at 230 V~ - Output voltage 5 VAC (±5 %) SELV - Fluctuations in the output voltage 150 mV - Nominal output current 2.1 A (1 x 2,100 mA) (±10 %) - Useful power: maximum 77 % - Operating temperature: 0 °C/+ 45 °C (indoor use) - Protection class: IP20, only suitable for indoor use - Protection class of the device II - Overvoltage protection (EN 62109): Class III - Screw terminals max. 2.5 mm² - Device with a contact gap of min. 3 mm - Complies with EN 60950-1 and the LVD and EMC directives

- Electronic switch activated by  any standard ISO card - Power supply 230 V~ 50 Hz - Output relay 3A 250V~ for an external  external load switch* - Switch-off delay 15-20 s - Complies with EN 61000-1 - without ISO card - not intended for access control

DOSENKLEMMLEISTEN GESCHLOSSEN UW11TS-U

CAN TERMINAL STRIPS UW17CO-U

- Relay unit for card switch EM44 - Power supply 230 V~ 50 Hz - complies with EN 61000-1 - Mounting on a DIN rail 35mm, 3MU - Inputs and outputs in relation to installation: 1-room or 2-room

CAN TERMINAL STRIPS CLOSED UW10TS-U

LED-LAMPE 24V AC/DC 0,20W IA21RD-U- zur Kontrollbeleuchtung, Beleuchtung oder ständige Beleuchtung des Schalters- in Kombination mit Wippe mit einem Indikator

- Electronic switch activated by an RFID-ISO card - 5V supply from the relay unit  EM49 via cable with RJ12 connections - Output: Connection to EM49 relay unit - Switch-off delay "main power" when removing the card  removal of the card 15-20 s - HVAC" switch-off delay when removing the card  card when window or balcony door is open - 1 minute - Complies with EN 61000-1 - without ISO card - Not intended for access control

EM47-U -CARD ISO -for use with card switch EM40 -size: 85x54 mm

- Parallel connection to the first socket outlet in series - Protection class III - Uc=275Vac, Uoc/Isc=6kV/3kA, Up<800V - complies with IEC 61643-1 - Conductor 1.5 mm², IP20 - Signal tone in case of destruction