Synergy 21 LED Flex Strip 60 WW DC24V 72W IP68 CRI>90
MSRP: €99.00
Not in stock
Product information "Synergy 21 LED Flex Strip 60 WW DC24V 72W IP68 CRI>90"
LED Flex Strip warm white,
DC24V, max. 3A, 72W,
300Leds, 120°, 5050SMD
CRI>90
Length: 5000*12.9*5mm,
Lumen: 4500
3000K ±250
outdoor, filled tube, IP68
can be shortened: every 5 cm
open cable end
Adhesive tape for mounting aid on the back
Suitable up to -25°C!
Energy efficiency class: A
kWh/1000h: 72
Please note that LED strips also need to be cooled.
Make sure that the LED strip does not exceed an operating temperature of 40°C, otherwise the service life cannot be guaranteed.
Article properties
| Abstrahlwinkel: | 120 Grad |
|---|---|
| Ampere (CC): | 3 A |
| CRI: | >90 CRI |
| Dimmbar: | Ja, abhängig vom Netzteil |
| Konstantstrom oder Konstantvolt: | CV |
| LED Strip Breite: | 12.90 mm |
| LED Strip Chip Anzahl: | 60 |
| LED Strip Chip Typ: | 5050 |
| LED Strip Höhe: | 5 mm |
| LED Strip Klebeband: | ja |
| LED Strip Länge: | 5000 mm |
| LED Strip kürzbar: | 100 mm |
| Lichtfarbe Name: | Warmweiß |
| Lichtfarbe in Kelvin: | 3000 K |
| Lumen: | 4500 LM |
| Schutzklasse: | IP68 |
| Volt: | 24 Volt |
| Watt: | 72 W |
Information on Energy efficiency
| Energy efficiency class A | |
|---|---|
| KWh/1000h: | 72 |
| Lumen: | 4500 |
| Watt: | 72 |
| Lifetime: | 35000 h |
| Switch cycles: | 50000 |
| Optimal operating temperature: | 25 °C |
| EEK Label: | Download |
Hollow socket (DC socket) with screw terminals 2.1 x 5.5 mm. Suitable for Synergy21 LED Strips, etc. The connection of the plugs is not standardised. The outer conductor is often negative. Length/width/height in mm 39.5/14.6/13 Weight: 7 grammes
Not in stock
Hollow plug (DC plug) 2.1 x 5.5 mm with screw terminals. Suitable for Synergy21 LED Strips, etc. Plug: 2.1 x 5.5 mm The connection of the plugs is not standardised. The outer conductor is often negative. Length/width/height in mm 38.5/13.9/12.8 Weight: 5.5 grammes
Not in stock
LED strip mounting clip made of silicone 10 pieces pack 10clamps
Not in stock
250V/450V PTI250, T85 IP68 at 5 bar, 24A Contains an internal screw connector insert for up to 5 cables, which can be which can be connected at both ends. Rubber inserts for different cable diameters for sealing are included in the included in the scope of delivery. Min. Ø5mm to max. Ø14mm cable diameter
Not in stock
Hosing: PA66 O-ring: silicone Conductor material: cooper Cable range: 13.5mm~17mm Cable size: 4mm2 Temperature: 85°C Voltage: 250V Ingress protection: IP68 Fire classification: 94V0
Not in stock
Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS Dimension: W=6,5cm, L=10cm
Not in stock
Waterproof junction boxes with terminal blocks, cable to cable 250V/450V PTI 250, T50 IP68 16A Min. Ø5mm, Max. Ø14mm
Not in stock
Box material: PA66 IP Class: IP66 Sunscreen Rating:Sun Protection(UV) Terminal Blocks: Housing Polypropylene 94-V2grade(PA) Metal Part:Plated Brass/Steel Spring Screws: SS
Not in stock
IP68 cable connector with 2 compartment terminal Voltage: 450V Current: 32A IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm
Not in stock
IP68 cable connector with 3 compartment terminal Voltage: 450V Current: 32A IP68 The following 3 cable seals are included in the set: Seal for cables with the following outer diameter: OD 6mm-8mm, OD 7mm-9mm and OD 9mm-12mm. Size: 29*85mm
Not in stock
5 pack of quick connectors 3 inputs and 3 outputs for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C
Not in stock
5 pack of quick connectors 2 inlets and 4 outlets for electrical cables Rigid: from 0.08 - 4 mm² Flexible: from 0.08 - 2.5mm² Volt: up to 250V Ampere: up to 32A Temp: -40°C ~ 105°C
Not in stock
Löt shrink connector – Waterproof IP67 Löt heat shrink connector – Waterproof IP67 Waterproof solder sleeves (Solder Sleeves) for fast, secure and tight cable connections. Integrated tin ring for the electrical connection, outer heat-shrinkable sleeve with hot-melt adhesive seal for reliable sealing (IP67). Advantages Soldering, shrinking and sealing in a single work step Weather, vibration and corrosion resistance (IP67) No crimping pliers required ; hot air is sufficient Ideal for cars, motorbikes, boats, outdoor electrics and electronics Technical details Colour Conductor cross-section (mm²) AWG Length (mm) Typical application White 0,25–0,34 26–24 26 Dünne signal lines Red 0.5–1.0 22–18 40 Electronics/automotive cables Blue 1.5–2.5 16–14 40 Standard power cable Yellow 4.0–6.0 12–10 40 Stronger supply lines Key points Soldering, shrinking & sealing in one step Waterproof (IP67) and corrosion-resistant Integrated tin ring for secure electrical connection Heat-shrinkable outer jacket with hot-melt adhesive seal No crimping tool required – only hot air or lighter Ideal for automotive, boat, motorbike, electronics & outdoor wiring Note on the application Stripping the conductor, twisting it and pushing it into the connector (overlap the wires in the tin ring). Heat with hot air from the centre (tin ring) towards the ends until tin flows and adhesive emerges. Let cool, carry out a tensile test. Only for copper conductors.
Not in stock