Ubiquiti Unifi Access Point In-Wall/ WIFI 6 / Indoor / 4x4 MU-MIMO / U6-IW
Product number:
213045
EAN:
810010077493
Manufacturer Number:
U6-IW
Weight:
0,460 KG
Product information "Ubiquiti Unifi Access Point In-Wall/ WIFI 6 / Indoor / 4x4 MU-MIMO / U6-IW"
Wall-mounted WiFi 6 access point with a built-in PoE switch.
115 m² (1,250 ft²) coverage
300+ connected devices
WiFi6 (4x4 MIMO)
Powered using PoE*
*PoE+ input required for single port PoE output.
Technical Specifications
| Mechanical | |
|---|---|
| Dimensions | 139.66 x 96 x 31.19 mm (5.5 x 3.78 x 1.28") |
| Weight | 460 g (1.01 lb) |
| Enclosure materials | Plastic, aluminum |
| Mount material | Aluminum |
| Hardware | |
| Networking interface | (1) Data-in: 1GbE RJ45 port (4) Data-out: 1GbE RJ45 ports |
| Management interface | Ethernet Bluetooth |
| PoE interface | (1) PoE in (PoE output not used) (1) PoE out (Requires a PoE+ switch) |
| Power method | PoE |
| Power supply | UniFi PoE switch 48V, 0.5A PoE adapter (Optional) |
| Max. power consumption | Excluding PoE output: 13.5W |
| Max PoE wattage per port by PSE | 15.4W* *Requires a PoE+ switch |
| Voltage range PoE mode | 44—57V DC |
| Max. TX power 2.4 GHz 5 GHz |
22 dBm 26 dBm |
| MIMO 2.4 GHz 5 GHz |
2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) |
| Throughput rate 2.4 GHz 5 GHz |
573.5 Mbps 4.8 Gbps |
| Antenna gain 2.4 GHz 5 GHz |
5 dBi 5.9 dBi |
| LED | White/blue |
| Button | Factory reset |
| Operating temperature | -30 to 60° C (-22 to 140° F) |
| Operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| Software | |
| WiFi standards | 802.11a/b/g WiFi 4/WiFi 5/WiFi 6 |
| Wireless security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) |
| BSSID | 8 per radio |
| VLAN | 802.1Q |
| Advanced QoS | Per-user rate limiting |
| Guest traffic isolation | Supported |
| Concurrent clients | 300+ |
| Zero-wait DFS | Yes* *Supported with upcoming firmware versions. |
| Supported Data Rates | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n (WiFi 4) | 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) |
| 802.11ac (WiFi 5) | 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) |
| 802.11ax (WiFi 6) | 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) |
| Application Requirements | |
| UniFi Network | Version 6.4.52 and later |
Ubiquiti UI Care • U6-IW
Software license for resale - no copyright transfer
Mit UI Care verlängern Sie die Herstellergarantie auf fünf Jahre und genießen exklusive Vorteile.
+ ALLNET Service-Leistung
Dieser Artikel kann nur für Produkte verwendet werden die von ALLNET auch gekauft worden sind. Die Seriennummer wird gebunden mit dem Artikel.
Product number:
232000
Manufacturer Number:
UICARE-U6-IW-D
Stock:
53x
Available, delivery time: 1-5 Tage
Ubiquiti Unifi Access Point Extender, U6-Extender
Easy-to-deploy WiFi 6 coverage extender with a 5.3+ Gbps aggregate throughput rate.
115 m² (1,250 ft²) coverage
300+ connected devices
WiFi6 (4x4 MIMO)
Powered with standard AC wall outlet*
*EU power plug only.
Technical Specifications
Mechanical
Dimensions
US: 169.7 x 112.2 x 32.2 mm (6.68 x 4.42 x 1.27")
EU: 169.7 x 112.2 x 77.6 mm (6.68 x 4.42 x 3.05")
Weight
US: 290 g (10.2 oz)
EU: 340 g (12 oz)
Enclosure material
Plastic
Hardware
Management interface
Bluetooth
Power method
Universal AC input, 100—240V AC, 0.3A max., 50/60 Hz
Supported voltage range
110—240V AC
Max. power consumption
11W
Max. TX power
2.4 GHz
5 GHz
22 dBm
26 dBm
MIMO
2.4 GHz
5 GHz
2 x 2 (UL MU-MIMO)
4 x 4 (DL/UL MU-MIMO)
Throughput rate
2.4 GHz
5 GHz
573.5 Mbps
4.8 Gbps
Antenna gain
2.4 GHz
5 GHz
5 dBi
6 dBi
LED
White/blue
Button
Factory reset
Operating temperature
-10 to 50° C (14 to 122° F)
Operating humidity
5 to 95% noncondensing
Certifications
CE, FCC, IC
Software
WiFi standards
802.11a/b/g
WiFi 4/WiFi 5/WiFi 6
Wireless security
WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID
8 per radio
VLAN
802.1Q
Advanced QoS
Per-user rate limiting
Guest traffic isolation
Supported
Concurrent clients
300+
Zero-wait DFS
Yes*
*Supported with upcoming firmware versions.
Supported Data Rates
802.11a
6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b
1, 2, 5.5, 11 Mbps
802.11g
6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4)
6.5 Mbps to 600 Mbps (MCS0 - MCS31 , HT 20/40)
802.11ac (WiFi 5)
6.5 Mbps to 3.4Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6)
7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160)
Application Requirements
UniFi Network
Version 6.5.55 and later
Product number:
213047
Manufacturer Number:
U6-Extender
Stock:
53x
Available, delivery time: 1-5 Tage
Ubiquiti PoE Injector • PoE • 15W • GbE • U-PoE
PoE Injector, 802.3AF
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:
Surge protection
Clamping protection
Maximum surge discharge
Peak pulse current
AC cable with earth ground
Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.
Product number:
153145
Manufacturer Number:
U-PoE
Stock:
53x
Available, delivery time: 1-5 Tage
Ubiquiti PoE Injector • PoE+ • 30W • GbE • U-PoE+
An adapter that can power UniFi PoE+ devices, reduce dependence on the PoE switch power supply and provide a Gigabit LAN connection.
Highlights:
Delivers up to 30 W PoE+
Overvoltage, pulse peak and overcurrent protection
Includes RJ45 data input, AC cable with earthing and PoE+ output
LED indicator for status monitoring
Technical data:
Dimensions
93 x 62 x 35 mm (3.7 x 2.4 x 1.4 inches)
Weight
156 g (5.5 oz)
Output voltage
48 V DC at 0.65 A
LAN activity indicator
NO
Gigabit LAN connection
Yes
Remote reset function
NO
Reset button
NO
Nominal voltage
100–240 V alternating current at 50/60 Hz
Input current
0.75 A max
Inrush current
<100 A peak at 26 °C
Efficiency
87 %
Output ripple
1% max
Switching frequency
70 kHz max.
Line regulation
= 3 %
Load control
= 5 %
2-pair power supply
Pins 4, 5 (+) and 7, 8 (-)
4-pair power supply
NO
AC connection
IEC-320 C6
Data input/PoE
RJ45 shielded socket
&overvoltage protection
Difference and common mode
Clamp protection
11 V data, 60 V current
Max. Surge discharge
1500A (8/20 µs) power
Peak pulse current
36A (10/1000 µs) data
Shunt capacitance
<5 pF data
Response time
<1 ns
Operating ambient temperature
0 to 40 °C (32 to 104 °F)
Storage temperature
-30 to 70 °C (-22 to 158 °F)
Humidity during operation
10 to 95 % non-condensing
Certifications
CE, FCC, IC, UL
Product number:
201169
Manufacturer Number:
U-PoE+
Stock:
53x
Available, delivery time: 1-5 Tage
Ubiquiti WiFiMan Wizard
A portable spectrum analyzer designed for the WiFiMan iOS and Android mobile app.
2.4 GHz and 5 GHz unlicensed band scanning
240 minutes continuous scanning battery life
BLE smartphone pairing with USB-C charging port
iPhone Magsafe attachable support*
*A mag-safe case is required to attach this device to an iPhone.
Technical Specifications
Mechanical
Dimensions
78.5 x 50.5 x 7.9 mm (3.1 x 2 x 0.3")
Weight
32 g (1.1 oz)
Enclosure material
Plastic
Weatherproofing
IP55
Hardware
Management interface
Bluetooth
Power method
Li-ion battery
Power supply
Rechargeable Li-ion battery, 3.7V DC, 300mAh
Max. power consumption
32.4mW
Charger voltage
USB-C, 5V DC/1A
LED
White/blue/red
Buttons
(1) Power
(1) Factory-reset
Operating temperature
0 to 40° C (32 to 104° F)
Operating humidity
10 to 90% noncondensing
Certifications
CE, FCC, IC
SSID Scan
Frequency range
2.4 to 2.5 GHz
5.15 to 5.85 GHz
Amplitude range
-96 dBm to 0 dBm
Amplitude resolution
1 dBm
Software
Management application
UniFi WiFiman iOS™: Version 0.18.0 and later
UniFi WiFiman Android™: Version 1.15.0 and later
Product number:
217193
Manufacturer Number:
WM-W
Stock:
53x
Available, delivery time: 1-5 Tage
Ubiquiti UACC-LRE Longe Range Ethernet Repeater
Long-range Gigabit Ethernet adapter that receives PoE/PoE+ and offers passthrough PoE output.
Extend PoE connections up to 1 km*
(1) GbE RJ45 port for PoE/PoE+ input**
(1) GbE RJ45 port for passthrough PoE output
10kA+ surge protection
Works reliably in extreme temperatures (-40 to 80° C)
*Repeaters must be placed in 100 m increments.
**Powered with pins 1, 2+; 3, 6- which may not be supported by certain third-party switches. We recommend using a UniFi switch to power the device.
Technical Specifications
Mechanical
Dimensions
196.5 x 93.5 x 39 mm ( 7.7 x 3.7 x 1.5")
Weight
350 g (12.3 oz)
Enclosure material
UV stabilized polycarbonate
Mounting material
Stainless steel
Weatherproofing
IPX5
Hardware
Networking interface
(2) GbE RJ45 ports
PoE interface
(1) Passthrough PoE output 2-pairs (pins 1,2+; 3,6-)
Power method
PoE/PoE+ 2-pairs (pins 1, 2+; 3, 6-)*
*May not be supported by certain third-party switches. We recommend using a UniFi switch to power the device.
Max. power consumption (excluding PoE out)
1.5W
Voltage range
37—57V DC
ESD/EMP protection
Air/contact: ± 30kV
DC sparkover voltage
90V at 100V/s
Max. impulse sparkover voltage
700V at 1kV/μs
Discharge current
10kA+
Max. MTU
1,500 bytes
Modes
Long-range indoor
Outdoor ethernet repeater
Operating temperature
-40 to 80° C (-40 to 176° F)
Operating humidity
10 to 95% non-condensing
Certifications
CE, FCC, IC
LEDs
System
Blue: power ON
Ethernet
Green: 1 Gbps
Amber: 10/100 Mbps
PoE
Amber: passthrough PoE out
Product number:
211899
Manufacturer Number:
UACC-LRE
Stock:
53x
Available, delivery time: 1-5 Tage