Synergy 21 PoE driver- CV Driver PoE+

ALLNET Switch full managed Layer2+ 10 Port • 8x GbE • PoE Budget 130W • 8x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8610PMJ Highlights: 8-port 10/100/1000Mbit/s with full PoE support 2x SFP slots for optional MiniGBICS PoE power 4x a´ 30 watts (IEEE802.3at or 8x IEEE802.3af) LÜFTERLESS DESIGN with internal power supply Supports L2+ switching functions such as 802.1Q VLAN, mirroring, port isolation, IGMP snooping, DHCP snooping, LLDP, POE+ management, IP source guard, ARP inspection, ACLs etc. Support of Spanning Tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1s). Support of extended management via WEB, CLI, TELNET, SSH, SNMP. Support for cable diagnostics and SFP DDM. Supports PoE management, such as PoE schedule, PoE PD Alive. Supports G.8032 quick ring protocol. Self-recovery time <20ms. Supports DDM, SFP digital diagnostics & monitoring Support of IPV4 and IPV6 functions for static routing Support of memory and CPU monitoring 4KV overvoltage protection, 6KV contact/8KV air protection PoE budget 130 W NEW: PoE & LAN JSON Java script notation API for ON/OFF via remote Product description: The ALL-SG8610PM is a fully managed Layer 2+ Gigabit PoE switch that features intelligent PoE capabilities to improve the availability of critical business applications. It offers IPv6/IPv4 management and an integrated L2+ Gigabit switching engine together with 8*10/100/1000BASE-T ports with 30 Watt 802.3at PoE+ and 2 Gigabit SFP slots. With a total power budget of up to 130 W for various types of PoE applications, it offers fast, secure and cost-effective Power over Ethernet network solutions for IP surveillance in small businesses and enterprises. The ALL-SG8610PM is programmed for advanced switch management features such as 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping and MLD Snooping. In addition, the Link Layer Discovery Protocol (LLDP) is included as a layer 2 protocol to determine basic information about neighbouring devices in the local broadcast domain.   Extensive PoE management function As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8610PM has the following special PoE management functions:   PoE PD alive check Timed rebooting of the power supply PoE schedule Monitoring of PoE utilisation Soft reboot PoE non-stop Prioritisation of the PoE port feed-in Intelligent PD alive check for frozen PDs The ALL-SG8610PM industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8610PM restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is significantly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator. PoE schedule function for energy saving To protect the environment, the AALL-SG8610PM Switch Ethernet PoE can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals, and is a powerful feature that helps SMEs or enterprises to save power and money. Planned PD restart The intelligent PoE switch ALL-SG8610PM allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow. Redundant ring with fast recovery for critical network applications The ALL-SG8610PM supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.   Strong layer 2 functions The ALL-SG8610PM Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8610PM enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over. Efficient and versatile management methods For efficient management, the ALL-SG8610PM is equipped with console, web and SNMP management interfaces. With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option. For text-based management, access is possible via Telnet and the console port. For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session. Intelligent PoE switch with SFP DDM function The ALL-SG8610PM supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.    JSON-Java Script Object Notation API With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.   PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function) LAN Port Enabled/Disabled (for switches without PoE) Technical data: Model ALL-SG8610PM Copper Ports 8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Fibre ports 2x1G BASE-X SFP interfaces, supports 100M/1G Mbps dual mode PoE ports 1~8-802.3af/802.3at PoE Injector Ports Console ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch architecture Store-and-forward Switch Fabric 20 Gbps/non-blocking Throughput 14.88Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 bytes SDRAM 1Gb Flash memory 128Mb Flow control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset button >2 sec: Factory default and reset Power supply 100~240V AC, 50/60Hz, 4A (max.) Power consumption Max.150 watts/1122 BTU PoE standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE power supply type Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) PoE budget 130W LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 interfaces (Port 1 to Port 8): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP interfaces (Port 9 to Port 10): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation flow control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link aggregation Static link aggregation LACP(Dynamic Trunk/Static Trunk) Algorithm based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunnelling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate limiting (Ingress/Egress) Stri Priority Security features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration backup/reload  Dual firmware LLDP Configuration Export/Import                                CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbour discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 280x213x44.5mm Weight 2 kg Working Temperature -10°C to 45°C Storage Temperature -20°C to 70°C MTBF 50,000hrs

ALLNET Switch full managed 24 Port Gigabit 390W / 24x PoE+ / 4x SFP / FANLES / 19" / "ALL-SG8626PM" Cost-effective 24 Port Smart Managed Gigabit Layer-2 Switch + 4x SFP MiniGbic Slots without Fan for Desktop and 19" Rack Installation Highlights: 24 Port Gigabit Layer2+ Switch Architecture Port 23/24 combo ports for TP or SFP + Port 25/26 SFP slots Supports various PoE management functions, including PoE shedule, PoE PD alive, etc. Supports SFP DDM & cable diagnostics Supports G.8032 ERPS, self-detection time < 20 ms Supports port aggregation 4KV surge protection, 6KV contact/8KV air ESD protection Totally fanless, no more annoying noise....  max. 390W budget 19 "inch angle or wall/table mounting possible ALL-SG8626PM is a layer 2+ full managed switch PoE, which supplies 24**10/100/1000M RJ45 ports and 4*1G uplink  SFP slot ports ( 2 shared combo), with 24 port PoE with IEEE802.3 af/at standards, single port POE power output up to 30W. Rich PoE Management Function Being the managed PoE switches for CCTV surveillance, wireless and VoIP networks, ALL-SG8626PM features the following special PoE management functions: PoE PD-alive check Scheduled power rebooting PoE schedule PoE usage monitoring Soft-reboot PoE Non-stop PoE port power feeding priority Smart PoE PD-Alive Check ALL-SG8626PM managed PoE switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8626PM will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden. PoE Schedule Function for Energy Saving For environmental protection purpose, the ALL-SG8626PM switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled PD Re-starting The ALL-SG8626PM smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. Fast Recovery Redundant Ring for Critical Network Applications The ALL-SG8626PM supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. Strong Layer 2 Features The ALL-SG8626PM layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the ALL-SG8626PM allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well. Efficient and Various Management Methods For efficient management, the ALL-SG8626PM is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, it offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and the console port. For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. Intelligent PoE Switch SFP DDM Function The ALL-SG8626PM supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Technische Daten: Model ALL-SG8626PM Copper Ports 22-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports Combo Interfaces 2x 100/1000BASE-X SFP interface shared with port-23 and port-24; Supports 100/1000Mbps dual mode and DDM Fiber Ports 2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode PoE Ports 1~24-802.3af/802.3at PoE Injector Ports Console Ports 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 52 Gbps/non-blocking Throughput 38.69Mpps @64 bytes Address Table 8K entries Share Data Buffer 4 Mb Jumbo Frame 9600 Bytes SDRAM 1Gb Flash Memory 128Mb Flow Control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Reset Button >2 sec.: Factory default and reset Power Supply 100~240V AC, 50/60Hz, 4A (max.) Power Consumption Max. 400 watts/1122 BTU PoE Standards IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) LED Indicators Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 24): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 22 to Port 24): Green Blink - port connected with data transmission; Solid on- port connected without data transmission EMC Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 Layer2 Functions Port configuration Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics Link Aggregation Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP MAC Table Aging Time Static MAC address Dynamic MAC address management VLAN 4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP ACL 256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 Spanning tree 802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter Ring Protection <20ms G.8032 ERPS Ring Fast Ring Multicast 256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing QOS 8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority Security Features Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection Management SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload  Dual Firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow Other Features DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD PoE management Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop Maintenance Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring Layer 3 functions Static Routing IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) IPV6 IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 Dimension 440x290x44.5 mm Weight 4.5 kg Working Temperature -10 °C to 45 °C Storage Temperature -20 °C to 70 °C MTBF 50,000hrs

Temperature measurement via network easy made Highlights: detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network Robust metal housing Brackets for attachment to wall Suitable for all operating systems 1x ALL3006 Temp-Sensor including Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API Optional Free-Software Modules like SNMP  / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean / The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage. The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems. The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/ Intelligent features and programming by switching matrix Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists. Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol.   Flexible installation options The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary.   Borderless Cross-site temperature measurement Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc. Maximum number of sensors per ALL3419:       Element Specification Sensor interface: 3x RJ45 for sensor/actor modules 1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise" 1x RJ45 Console Port for Serial-Connection Ethernet: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN 2,4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power source: 100~240 VAC, 50/60 Hz Power Consumption: <3 watt in operation Housing: metal housing Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 70 °C Storage humidity: 5% ~ 90% (non-condensing) Regulatory: CE, RoHS Dimensions: 92 x 85 x 24 mm (L x W x H)  Weight: 134 g (ALL3419 with ALL3006 sensor) Package content: -ALLNET ALL3419 -ALLNET ALL3006 temperature sensor -WLAN antenna -External power supply -Quick installation guide

EnOcean dimmer switch (batteryless / wireless) For receivers of the EOS 09 series or other EnOcean devices Operating temperature: -20°C - +50°C CE/FCC/RoHS Protection class: IP20

Ultra Slim LED Panel Light, Version PRO Verwendungszweck: Einbau in die Odenwalddecke mit optionalen Zubehör sind auch weitere Montagearten möglich (Aufputz, Unterputz, Abhängen, Wandauf und -einbau etc.) Rahmenfarbe: weiss Leistungsaufnahme : 35 Watt Lumenzahl: 4200Lm, Lm/W=120 Lichtfarbe: neutralweiss 4000 MacAdam/SDCM < 3 Color Rendering Index (CRI): >83 Abstrahlwinkel: 120° Schutzklasse: IP40 / IK05 Rated Lifetime (L80): 50.000h Arbeitstemperatur: -10° to +45° (Amb.) Stromzufuhr: 700mA & 42±2V/DC (constant current / Konstantstrom) Achtung: das Panel wird Standardmäßig OHNE Netzteile geliefert. Netzteil: siehe Zubehör Größe (Außenmaße):622mm x 622mm x 12mm Größe (Lochmaße) :605mm x 605mm Garantie: 5 Jahre Energieeffizienzklasse: A+ kWh/1000h: 38,5 IES files download: http://www.synergy21.de/service-support/downloads/lichtberechnung-ies/  

Ultra Slim LED Panel Light, PRO version Intended use: Installation in the Odenwald ceiling Other types of installation are also possible with optional accessories (surface-mounted, flush-mounted, suspended, wall-mounted and recessed, etc.) Frame colour: white Power consumption: 35 watts Lumen output: 4200Lm, Lm/W=120 Light colour: neutral white 4000 MacAdam/SDCM < 3 Colour rendering index (CRI): >83 Beam angle: 120° Unified glare rating: UGR<19 Protection class: IP40 / IK05 Rated lifetime (L80): 50,000h Operating temperature: -10° to +45° (Amb.) Power supply: 700mA & 42±2V/DC (constant current) Attention: the panel is supplied WITHOUT power supply as standard. Power supply: see accessories Size (outer dimensions): 622mm x 622mm x 12mm Size (hole dimensions): 605mm x 605mm Warranty: 5 years Energy efficiency class: A+ kWh/1000h: 38.5 IES files download: http://www.synergy21.de/service-support/downloads/lichtberechnung-ies/

Ultra Slim LED Panel Light, PRO version Intended use: Installation in the Odenwald ceiling Other types of installation are also possible with optional accessories (surface-mounted, flush-mounted, suspended, wall-mounted and recessed, etc.) Frame colour: white Power consumption: 35 watts Lumen output: 4200Lm, Lm/W=120 Light colour: cool white 5700 MacAdam/SDCM < 3 Colour rendering index (CRI): >83 Beam angle: 120° Protection class: IP40 / IK05 Rated lifetime (L80): 50,000h Operating temperature: -10° to +45° (Amb.) Power supply: 700mA & 42±2V/DC (constant current) Attention: the panel is supplied WITHOUT power supply as standard. Power supply: see accessories Size (outer dimensions): 622mm x 622mm x 12mm Size (hole dimensions): 605mm x 605mm Warranty: 5 years Energy efficiency class: A+ kWh/1000h: 38.5 IES files download: http://www.synergy21.de/service-support/downloads/lichtberechnung-ies/

Ultra Slim LED Panel Light, PRO version Intended use: Installation in the Odenwald ceiling Other types of installation are also possible with optional accessories (surface-mounted, flush-mounted, suspended, wall-mounted and recessed, etc.) Frame colour: white Power consumption: 35 watts Lumen output: 4200Lm, Lm/W=120 Light colour: cool white 5700 MacAdam/SDCM < 3 Colour rendering index (CRI): >83 Beam angle: 120° Unified glare rating: UGR<19 Protection class: IP40 / IK05 Rated lifetime (L80): 50,000h Operating temperature: -10° to +45° (Amb.) Power supply: 700mA & 42±2V/DC (constant current) Attention: the panel is supplied WITHOUT power supply as standard. Power supply: see accessories Size (outer dimensions): 622mm x 622mm x 12mm Size (hole dimensions): 605mm x 605mm Warranty: 5 years Energy efficiency class: A+ kWh/1000h: 38.5 IES files download: http://www.synergy21.de/service-support/downloads/lichtberechnung-ies/    

Ultra Slim LED Panel Light, PRO version Intended use: Installation in the Odenwald ceiling Other types of installation are also possible with optional accessories (surface-mounted, flush-mounted, suspended, wall-mounted and recessed, etc.) Frame colour: white Power consumption: 35 watts Lumen output: 4200Lm, Lm/W=120 Light colour: warm white 3000K MacAdam/SDCM < 3 Colour rendering index (CRI): >83 Beam angle: 120° Unified glare rating: UGR<19 Protection class: IP40 / IK05 Rated lifetime (L80): 50,000h Operating temperature: -10° to +45° (Amb.) Power supply: 700mA & 42±2V/DC (constant current) Attention: the panel is supplied WITHOUT power supply as standard. Power supply: see accessories Size (outer dimensions): 622mm x 622mm x 12mm Size (hole dimensions): 605mm x 605mm Warranty: 5 years Energy efficiency class: A+ kWh/1000h: 38.5 IES files download: http://www.synergy21.de/service-support/downloads/lichtberechnung-ies/

Ultra Slim LED Panel Light, PRO version Intended use: Installation in the Odenwald ceiling Other types of installation are also possible with optional accessories (surface-mounted, flush-mounted, suspended, wall-mounted and recessed, etc.) Frame colour: white Power consumption: 35 watts Lumen output: 4200Lm, Lm/W=120 Light colour: warm white 3000 MacAdam/SDCM < 3 Colour rendering index (CRI): >83 Beam angle: 120° Protection class: IP40 / IK05 Rated lifetime (L80): 50,000h Operating temperature: -10° to +45° (Amb.) Power supply: 700mA & 42±2V/DC (constant current) Attention: the panel is supplied WITHOUT power supply as standard. Power supply: see accessories Size (outer dimensions): 622mm x 622mm x 12mm Size (hole dimensions): 605mm x 605mm Warranty: 5 years Energy efficiency class: A+ kWh/1000h: 38.5 IES files download: http://www.synergy21.de/service-support/downloads/lichtberechnung-ies/    

Schutzkontakt 90° - Open End AE 1.8 m, 3 x 0,75 mm², schwarz 16 A / 250 V VDE geprüft Open End mit Aderendhülsen bestückt Aderendhülsen bei 1.8 m: L = 6 mm, ? 1.7 mm, Isolator gelb