Ubiquiti Wireless AP WIFI5 • AC2000 • 4x4 • Indoor • 1 GbE • In-Wall • Unifi • UAP-IW-HD

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6   Highlights: PoE injector according to IEEE802.3af/at with max. power of 30W 2x RJ45 Gigabit Ports PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-) internal power supply unit compact design incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable NEW: Wall mounting capable Intelligent power supply via network without switch With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets. For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling. Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch. The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt. The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet. Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-). Technical Details: Element Specifikation Standards: IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-Tx Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet Support terminal equipment with IEEE802.3af/at, PoE++ RoHS Compliance WEEE Compliance Ethernet Ports: 1x RJ45 10/100/1000 Mbps for connection to switch or hub 1x RJ45 10/100/1000 for connection to PoE end device PoE Output: PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-) Power supply: 100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length Power consumption: 30 Watt maximum with connected PoE end device AC Surge Protection: 1.0KV (5P/5N) L-N 1.2/50 (8/20) Tr/Th us 2.0KV (5P/5N) L-PE 1.2/50 (8/20) Tr/Th us N -PE Housing: Plastic housing Mounting: Wall-mounted Dimensions: length/width/height: 140 x 63 x 33 mm Environment: Operating Temperature: 0 ~ 40 °C Operating Humidity 10% ~ 90% (non-condensing) Storage Temperature: -20 ~ 90 °C Storage Humidity: 10% ~ 90% (non-condensing) EMI: FCC CFR47 Part 15 EN55024 EN55032 EMS: IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air) IEC61000-4-3(RS) 10V/m(80MHz~2GHz) IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM IEC61000-4-6(CS) 10V(150kHz~80MHz) Immunity: IEC60068-2-6(Vibration) IEC60068-2-27(Impact) IEC60068-2-32(Free Fall) Marks: CE; FCC

Customized encasing for Access Point In-Wall HD. Blends seamlessly into a variety of backgrounds Compatible with the In-Wall HD Sold as a 3-pack     Technical Specifications Mechanical Dimensions 145.6 x 93.6 x 27.7 mm (5.7 x 3.7 x 1.1") Weight 56 g (2 oz) Enclosure material Polycarbonate Colors Black Camo Concrete Marble Wood

Customized encasing for Access Point In-Wall HD. Blends seamlessly into a variety of backgrounds Compatible with the In-Wall HD Sold as a 3-pack     Technical Specifications Mechanical Dimensions 145.6 x 93.6 x 27.7 mm (5.7 x 3.7 x 1.1") Weight 56 g (2 oz) Enclosure material Polycarbonate Colors Black Camo Concrete Marble Wood

   Customized encasing for Access Point In-Wall HD. Blends seamlessly into a variety of backgrounds Compatible with the In-Wall HD Sold as a 3-pack     Technical Specifications Mechanical Dimensions 145.6 x 93.6 x 27.7 mm (5.7 x 3.7 x 1.1") Weight 56 g (2 oz) Enclosure material Polycarbonate Colors Black Camo Concrete Marble Wood

 Customized encasing for Access Point In-Wall HD. Blends seamlessly into a variety of backgrounds Compatible with the In-Wall HD Sold as a 3-pack     Technical Specifications Mechanical Dimensions 145.6 x 93.6 x 27.7 mm (5.7 x 3.7 x 1.1") Weight 56 g (2 oz) Enclosure material Polycarbonate Colors Black Camo Concrete Marble Wood

 Customized encasing for Access Point In-Wall HD. Blends seamlessly into a variety of backgrounds Compatible with the In-Wall HD Sold as a 3-pack     Technical Specifications Mechanical Dimensions 145.6 x 93.6 x 27.7 mm (5.7 x 3.7 x 1.1") Weight 56 g (2 oz) Enclosure material Polycarbonate Colors Black Camo Concrete Marble Wood

Layer 2/3, PoE switch with (24) Gigabit RJ45 ports, (2) SFP ports, and a 250W power supply. (24) GbE RJ45 ports (2) SFP ports 250W total PoE availability Rack-mountable, 1U         Technical Specifications Mechanical Dimensions 485 x 43.7 x 285.4 mm (19.09 x 1.72 x 11.24") Weight 4.7 kg (10.4 lb) Hardware Networking Interfaces (24) 10/100/1000 Mbps RJ45 Ethernet Ports (2) 1 Gbps SFP Ethernet Ports Management Interface (1) RJ45 Serial Port, Ethernet In/Out Band Total Non-Blocking Throughput 26 Gbps Switching Capacity 52 Gbps Forwarding Rate 38.69 Mpps Max. Power Consumption Includes PoE Output Excludes PoE Output 250W 30W Power Method 100-240VAC/50-60 Hz, Universal Input Power Supply AC/DC, Internal, 250W DC LEDs Per Port RJ45 Data Ports SFP+/SFP Data Ports PoE, Speed/Link/Activity Speed/Link/Activity Rackmount Yes, 1U High ESD/EMP Protection Air: ±24 kV, Contact: ±24 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC PoE Per Port PoE Interfaces PoE/PoE+ (Pins 1, 2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+; 7, 8-) Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range PoE+ Mode 50–57V Max. Passive PoE Wattage per Port 17W 24V Passive PoE Voltage Range 20-27V

Layer 2/3, PoE+ switch with (24) Gigabit RJ45 ports, (2) SFP ports, and a 500W power supply. (24) GbE RJ45 ports (2) SFP ports 500W total PoE availability Rack-mountable, 1U         Technical Specifications Mechanical Dimensions 485 x 43.7 x 285.4 mm (19.09 x 1.72 x 11.24") Weight 4.8 kg (10.6 lb) Hardware Networking Interfaces (24) 10/100/1000 Mbps RJ45 Ethernet Ports (2) 1 Gbps SFP Ethernet Ports Management Interface (1) RJ45 Serial Port, Ethernet In/Out Band Total Non-Blocking Throughput 26 Gbps Switching Capacity 52 Gbps Forwarding Rate 38.69 Mpps Max. Power Consumption Includes PoE Output Excludes PoE Output 500W 30W Power Method 100-240VAC/50-60 Hz, Universal Input Power Supply AC/DC, Internal, 500W DC LEDs Per Port RJ45 Data Ports SFP+/SFP Data Ports PoE, Speed/Link/Activity Speed/Link/Activity Rackmount Yes, 1U High ESD/EMP Protection Air: ±24 kV, Contact: ±24 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC PoE Per Port PoE Interfaces PoE/PoE+ (Pins 1, 2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+; 7, 8-) Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range PoE+ Mode 50–57V Max. Passive PoE Wattage per Port 17W 24V Passive PoE Voltage Range 20-27V

Layer 2/3, PoE+ switch with (48) Gigabit RJ45 ports, (2) SFP+ ports, (2) SFP ports, and a 500W power supply. (48) GbE RJ45 ports (2) SFP and (2) SFP+ ports 500W total PoE availability Rack-mountable, 1U       Technical Specifications Mechanical Dimensions 485 x 43.7 x 374.6 mm (19.09 x 1.72 x 14.75") Weight 6.1 kg (13.5 lb) Hardware Networking Interfaces (48) 10/100/1000 Mbps RJ45 Ethernet Ports (2) 1/10 Gbps SFP+ Ethernet Ports (2) 1 Gbps SFP Ethernet Ports Management Interface (1) RJ45 Serial Port, Ethernet In/Out Band Total Non-Blocking Throughput 70 Gbps Switching Capacity 140 Gbps Forwarding Rate 104.16 Mpps Max. Power Consumption Includes PoE Output Excludes PoE Output 500W 64W Power Method 100-240VAC/50-60 Hz, Universal Input Power Supply AC/DC, Internal, 500W DC LEDs Per Port RJ45 Data Ports SFP+/SFP Data Ports PoE, Speed/Link/Activity Speed/Link/Activity Rackmount Yes, 1U High ESD/EMP Protection Air: ±24 kV, Contact: ±24 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC PoE Per Port PoE Interfaces PoE/PoE+ (Pins 1, 2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+; 7, 8-) Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range PoE+ Mode 50–57V Max. Passive PoE Wattage per Port 17W 24V Passive PoE Voltage Range 20-27V

Layer 2/3, PoE+ switch with (48) Gigabit RJ45 ports, (2) SFP+ ports, (2) SFP ports, and a 750W power supply. (48) GbE RJ45 ports (2) SFP and (2) SFP+ ports 750W total PoE availability Rack-mountable, 1U       Technical Specifications Mechanical Dimensions 485 x 43.7 x 374.6 mm (19.09 x 1.72 x 14.75") Weight 6.5 kg (14.3 lb) Hardware Networking Interfaces (48) 10/100/1000 Mbps RJ45 Ethernet Ports (2) 1/10 Gbps SFP+ Ethernet Ports (2) 1 Gbps SFP Ethernet Ports Management Interface (1) RJ45 Serial Port, Ethernet In/Out Band Total Non-Blocking Throughput 70 Gbps Switching Capacity 140 Gbps Forwarding Rate 104.16 Mpps Max. Power Consumption Includes PoE Output Excludes PoE Output 750W 64W Power Method 100-240VAC/50-60 Hz, Universal Input Power Supply AC/DC, Internal, 750W DC LEDs Per Port RJ45 Data Ports SFP+/SFP Data Ports PoE, Speed/Link/Activity Speed/Link/Activity Rackmount Yes, 1U High ESD/EMP Protection Air: ±24 kV, Contact: ±24 kV Shock and Vibration ETSI300-019-1.4 Standard Operating Temperature -5 to 40° C (23 to 104° F) Operating Humidity 5 to 95% Noncondensing Certifications CE, FCC, IC PoE Per Port PoE Interfaces PoE/PoE+ (Pins 1, 2+; 3, 6-) 24VDC Passive PoE (Pins 4, 5+; 7, 8-) Max. PoE+ Wattage per Port by PSE 34.2W Voltage Range PoE+ Mode 50–57V Max. Passive PoE Wattage per Port 17W 24V Passive PoE Voltage Range 20-27V

Ubiquiti Unifi Switch 24 Port 250 Watt PoE Smart Managed PoE + Gigabit-Switch mit SFP Der UniFi® Switch ist mit 24 oder 48 RJ45-Gigabit-Ports erhältlich und bietet robuste Leistung, PoE + -Unterstützung und intelligentes Switching für wachsende Netzwerke. Modelle: US-24-250W       Leistungsstarke Enterprise-Switch-Modelle Der UniFi® Switch bietet die Weiterleitungskapazität, um gleichzeitig den Datenverkehr an allen Ports mit Leitungsrate ohne Paketverlust zu verarbeiten. Gesamtdurchsatz ohne Blockierung: Bis zu 26 Gbit / s für 24-Port-Modelle und bis zu 70 Gbit / s für 48-Port-Modelle. Erweiterte Portverwaltung Jeder Switch-Port bietet benutzerdefinierte Einstellungen: Portname, PoE, Netzwerk- / VLAN-Konfiguration und Betriebsmodus (Switching, Spiegelung oder Aggregat) sowie Unterstützung für 802.1X-Authentifizierung und Radius VLAN. Glasfaserkonnektivität Zwei SFP-Ports unterstützen Uplinks mit bis zu 1 Gbit / s. Für Uplinks mit hoher Kapazität enthält jedes 48-Port-Modell zwei SFP + -Ports für Uplinks mit bis zu 10 Gbit / s. Bequemer PoE + Support Der UniFi® Switch verfügt über eine automatische Erkennung von IEEE 802.3af / at PoE, um mehrere Geräte im Netzwerk mit Strom zu versorgen. Nahtlose Integration Der UniFi® Switch lässt sich nahtlos in die SDN-Plattform (UniFi Software-Defined Networking) integrieren und erstellt ein hoch skalierbares End-to-End-System von Netzwerkgeräten an mehreren Standorten - alle über eine einzige Schnittstelle gesteuert.   Technische Daten:  

Highlights:   Plug and Play installation Reliable surge protection for all devices with a network connection: • Switche, Router, Firewall, xDSL Modem, ISDN, NoteBook, PC / Server • Television • Multimedia Devices Protect your network equipment from power surges by lightning The ALLNET ALL95100 provides a cost-effective and reliable protection against damage to sensitive equipment. Housed in a compact body the ALLNET surge protection is simply inserted between the network cable or xDSL / ISDN connection and the equipment to be protected.   Without con guration the device is immediately protected from power surges. Along with a regular surge protector and bonding can be for example the infrastructure in safety-relevant areas permanently protected. Not only indoors, but also particularly like the outside, the ALL95100 is used effectively in conjunction with PoE enabled IP Cam‘s and wireless access points. Technical Details: Element Spezifikation Network Interface: 2x RJ45 10/100/1000Mbps PoE-Capability: IEEE802.3af, at, LTPoE++ bis 90W Arrest capacity: 10kA (8/20µs), 100A (10/1000µs) Ignition voltage: 90VDC ±20% (Pair to Earth) <450V (bei 100V/µs) <600V (bei 1kV/µs) Diff. Clamping: <15V, <5ns, 30Apk (Pair wire to wire) Diff. Capacity: <4.0pF Lines protected: (Pins)1 - 8 (at 8 pin modular plug) Test mark: IEEE 802.3, CAT 5, 6 ESD Protection: IEC 61000-4-2 class 4 (10kV CD) Housing: metal case Enviroment: Temperature operating: -15 ~ 40 °C Humidity operating: 10% ~ 95% (non condensed) Marks: CE, RoHS Maße: 82 x 25 x 25 mm (Length x Width x Height) weight: 200 Gramm Package content: -ALLNET ALL95100 -QIG