IP Steckdosen & Relais

Highlights: Ermöglicht das Schalten von bis zu sechs Verbrauchern (bis 10A) über den integrierten Webserver 10/100 Mbit RJ45-Netzwerkanschluss Wireless LAN nach IEEE802.11b/g/n mit 150 Mbps Deutsche Schutzkontakt-Dosen für 200 - 250 V Wechselspannung Schaltung zeit- und programmgesteuert oder manuell möglich optional: Erfassung von Temperatur/Luftfeuchte integriertes Stromm-Messmodul für Verbrauch oder Einspeisung. Über die ALL4176 IP-Steckdosenleiste können elektrische Geräte über ein Computernetzwerk ein- und ausgeschaltet werden. Sie wird in ein Computernetzwerk eingebunden, erhält eine eindeutige IP Adresse. Die Konfiguration und Bedienung erfolgt unabhängig von einer bestimmten Plattform oder einem Betriebssystem über einen beliebigen Webbrowser vom PC, MAC, Webpad oder Smartphone aus. Zusätzliche Software ist nicht nötig. Jede einzelne Steckdose kann über die Weboberfläche manuell und programmgesteuert geschaltet werden. Die Programmierung berücksichtigt unter anderem Uhrzeit, Wochen- und Kalendertage, Zeitdauer, Impulsschaltungen und vieles mehr. Zusätzlich kann jede einzelne Steckdose manuell per Taster am Gerät geschaltet werden. Mehrere ALL4176 können im Verbund abhängig voneinander betrieben werden. Darüber hinaus arbeiten Sie mit anderen ALLNET Automatisierungslösungen, wie z.B. ALL369x Powermeter, ALL3419, ALL4500, ALL5000, etc. zusammen. Durch optional erhältliche Sensoren zu Temperatur- und Luftfeuchtemessung, erweitern sich die Einsatzmöglichkeiten der ALL4176 IP-Steckdosenleiste enorm. Die ALL4176 Steckdosenleiste verfügt auch über ein integriertes Strom-Messmodul welches den Verbrauch/Einspeisung der ganzen Steckdosenleiste messen kann. Es können Volt / Hz / Ampere / Watt als auch Cos. Faktor gemessen werden. Selbstverständlich kann auch über Zeitsteuerung bis hin zum Recording der Daten alles verfasst werden. Anwendungsbeispiele: Gezielte Steuerung und Neustart von PCs und Servern aus der Ferne Neustart von Router aus der Ferne Zeitgesteuerte Eliminierung von unnötigem Stromverbrauch durch Standyby Geräte Komplexe Schaltszenarien in Verbindung mit anderen ALLNET Gebäudeautomationsprodukten inkl. Einfluss von Temperatur, Luftfeuchte, etc. viele weitere Anwendungen... Technische Daten: Anschlüsse: 6x Schutzkontaktsteckdose 1x RJ45 LAN 10/100 Mbit/s 1x R-SMA (WLAN) 1x USB 2.0 Host 1x USB-B Buchse (PowerON-Sensor) 1x RJ45 Sensoranschluss (Temp./Feuchte) Wireless LAN: 2,4 GHz Wireless N, bis zu 150 Mbps WLAN Sicherheit: WEP/WPA/WPA2 Unterstützte Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Protokolle: HTTP/HTTPS TCP/IP Management/Steuerung: per Webbrowser, XML Betriebssysteme: alle netzwerkfähigen Betriebssysteme Spannungsbereich: 200 - 250 Volt Schaltstrom: 6x 10 Ampere max. Gehäuse: Aluminium-Profilgehäuse Strommessmodul: integriertes Messmodul zur Messung von Verbrauch oder Einspeisung Umgebung: Temperatur Betrieb: 0 ~ 40 °C Luftfeuchtigkeit Betrieb: 10% ~ 85% (nicht kondensierend) Temperatur Aufbewahrung: -20 ~ 60 °C Luftfeuchtigkeit Aufbewahrung: 5% ~ 90% (nicht kondensierend) Maße: 425 x 140 x 55 (60) mm (Länge x Breite x Höhe) Gewicht: 2470 Gramm (ohne Verpackung und Zubehör) Lieferumfang: 1 Stück ALL4176 1 Netzkabel / Katlgeräte 1 Handbuch 1 WLAN Antenne

WLAN power socket, switchable via network / IP with performance measurement (positive/negative) • Allows switching of connected consumers (up to 16A resistive load) via integrated webserver - new release 3.2 • 10/100 Mbit RJ45 network interface • IEEE802.11b/g/n Wireless LAN with 300 Mbps • With integrated power plug socket • for 200 - 250 V AC • Voltage and consumption measurement • Time controlled, programmatically or manually switching The ALL3075v4 network power socket allows switching of connected devices via network or IP. The ALLNET device acts like an adapter between power outlet and electric consumer. Connected to a computer network, the ALL3075v4 is accessable via its own IP address. Both, con guration and operation can be done with any network based OS. No additional software is needed, the only requirement is a web browser. The ALL3075v4 measures and stores the energy consumption of any connected device. The switching operations can be done manually, based on time, consumption or by individual programming. Several devices of the The ALL3075v4 can also be combined to a grid. The network power socket works perfect with various ALLNET automation solutions, like the ALL369x Powermeter or ALL3418v2, 3419, ALL3500, ALL3505, ALL4500 and ALL5000 central units. The ALLNET ALL3075v4 adapter is based on the brandnew Release 3.2 user interface. In addition to several visible innovations, Release 3.2 offers for the rst time even the possibility to integrate multiple ALLNET sensors or actuators quickly and easily via JSON. This allows central administration of multi-site based measurement data. This supports administrators with a perfect clarity and facilitates their work dramatically. In additon to the RJ45 network interface the ALL3075v4 also offers a Wireless-N interface with a maximum transfer-speed of 300 MBit. This allows easy integration into wireless networks and seamless usage and con guration from every smart phone or tablet. The ALL3075v4 can be con gured for client or access point usage. The "server control" function allows easy control and even reset of connected PC or server systems. Server control sends automated ping requests to the connected server. If the PC or Server system does not answer in a pre-con gured time, the power outlet will quit the transfer and reset the connected device to restore functionality. Technical Details: Network: 10BaseT 100BaseTX Network connector: RJ45 Wireless LAN / WiFi: 2.4 GHz Wireless N, 150 Mbps 1T1R WiFi chipset: Ralink RT3352 WiFi Securityt: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Protocol: HTTP/HTTPS TCP/IP Management: via web browser, XML/JSON supported OS: all network supporting OS supported voltage: 200 - 250 volts switching current: max. 16 amps = until 3680 ohmic load power measurement: consumption (negative) feed-in from solar panels (positive) Housing: PVC with European Socket Environment: working temperature: 0 ~ 40 °C working humidity: 10% ~ 85% (non condensing) storage temperature: -20 ~ 60 °C storage humidity: 5% ~ 90% (non condensing) dimensions: 125 x 68 x 40 (60) mm weight: 200 grams (only the adapter)

Highlights: 10/100 Mbit RJ45 network connection  Wireless LAN according to IEEE802.11b/g/n with 150 Mbps  German protective contact sockets "Type F"  for 200 - 250 V alternating voltage  switching time and program controlled or manual possible  optional: recording of temperature/humidity  integrated current measuring module for consumption or feeding. The ALL4176v3 IP power strip can be used to switch electrical devices on and off via a computer network. It is integrated into a computer network, receives a unique IP address. Configuration and operation is performed independently of a particular platform or operating system via any web browser from a PC, MAC, webpad or smartphone. No additional software is required. Each individual socket can be switched manually and program-controlled via the web interface. The programming takes into account, among other things, time, week and calendar days, duration, pulse switching and much more. In addition, each individual socket can be switched manually by pushbutton on the device. Several ALL4176v3 can be operated interdependently in a network. Furthermore, they work together with other ALLNET automation solutions, such as ALL369x Powermeter, ALL3419, ALL4500, ALL5000, etc.. With optionally available sensors for temperature and humidity measurement, the application possibilities of the ALL4176v3 IP power strip expand enormously. The ALL4176v3 power strip also has an integrated current measurement module which can measure the consumption / supply of the entire power strip. It can measure volts / Hz / amps / watts as well as cos. Factor can be measured. Of course, everything can also be written about time control up to the recording of the data. Examples of use:     Targeted control and reboot of PCs and servers remotely     Restart of routers remotely     Time-controlled elimination of unnecessary power consumption by standby devices     Complex switching scenarios in connection with other ALLNET building automation products incl. influence of temperature, humidity, etc.     many other applications... Technische Daten: Connections: 6x safety socket 1x RJ45 LAN 10/100 Mbit/s 1x R-SMA (WLAN) 1x USB 2.0 host 1x USB-B socket (PowerON sensor) 1x RJ45 sensor connector (temp./humidity) WiFi: 2,4 GHz Wireless N, up to 150 Mbps WiFi Security: WEP/WPA/WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Protocols: HTTP/HTTPS TCP/IP Management/Control: Via web browser, XML operating systems: all network-compatible operating systems Voltage range: 200 - 250 volts Switching current: 6x 10 amps max. housing: Aluminum profile housing Environment: Temperature operation: 0 ~ 40 °C Humidity operation: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Dimensions: 425 x 140 x 55 (60) mm (length x width x height) Weight:    2470 grams (without packaging and accessories) Scope of delivery: 1 piece ALL4176v3 1 power cable devices 1 manual 1 WiFI antenna

Highlights: 2-in-1 smart socket with USB fast charging Up to 30 W Power Delivery via 2× USB-C and 1× USB-A Powerful earthed socket outlet up to 16 A / 3680 W with power measurement ESP32-C6 processor for fast and stable control WLAN (2.4 GHz) & BLE 5.1 for flexible connectivity Schedules, timers & alarms individually configurable MQTT-capable – ideal for smart home integrations Integrated power meter (V, A, W, Hz, power factor, apparent power) Safety functions with current limiting & behaviour in the event of a power failure The intelligent smart socket combines powerful energy supply, modern USB fast charging and comprehensive smart home functions in one compact device. Thanks to the integrated ESP32-C6 processor and support for WiFi 2.4 GHz and Bluetooth Low Energy 5.1, stable, fast and flexible control is guaranteed at all times. The protective contact socket reliably switches loads up to 16 A or 3680 W and also offers integrated power measurement, which allows you to keep an eye on voltage, current, power and energy consumption at all times. At the same time, two USB-C ports and one USB-A port enable convenient charging of smartphones, tablets or other devices with up to 30 W Power Delivery Fast Charging. Customised timer and time schedules, either according to time or sunrise and sunset, ensure maximum automation. The socket can be seamlessly integrated into existing smart home systems via MQTT. Additional protective functions, such as the configuration of the maximum current and definable behaviour in the event of a power failure, increase safety and reliability in everyday life. Whether as a smart socket, USB charging station or smart home control centre, this device combines convenience, performance and control in a modern, space-saving design.. . Component Technical details Processor Espressif ESP32-C6-Mini-1 Switching capacity relay 1 socket outlet with earthing contact 16 A / 3680 W with power metering Switching capacity relay 2 USB ports Max. 30 W PD Fast Charging Communication mode WiFi 2.4 GHz or BLE 5.1 USB charging ports 1× USB-A 2× USB-C LED switching status Blue = Relay 1 socket outlet with earthing contact on Off = Relay 1 socket outlet with earthing contact off Timer function Yes Timer can be configured for ON or OFF for both relay 1 protective contact and relay 2 USB ports Time schedules Mo–So, based on absolute time or sunrise/sunset, configurable for relay 1 and relay 2. Alarms Alarms can be configured in the schedules. The SMTP server must be set up under "Advanced view" in the Alerts tab. Protection settings & Default status Configuration of the maximum current (amperes) and the default status in the event of a power failure is possible MQTT Sockets can be switched via MQTT. MQTT data is freely configurable Integrated power meter Volts / amps / watts / Hz / power factor / apparent power Integrated charging function for USB Max. 30 W (2× USB-C + 1× USB-A) fast charging USB-C1 / USB-C2 single port output: 5 V==3 A, 9 V==3 A, 12 V==2.5 A, 15 V==2 A, 20 V==1.5 A USB-A single port output: 5 V==3 A, 9 V==3 A, 12 V==2.5 A USB-A + USB-C multi-port output: 5 V==3 A Button / switch ON / OFF button Dimensions 98 × 65 × 72 mm Environment -10 °C to +35 °C How to use Plastic, white

Highlights: 4-socket WiFi smart power strip with USB fast charging Four individually switchable earth-connected sockets up to 16 A / 3680 W (total power) Integrated power meter (total measurement) for sockets and USB charging ports Manual switches directly on the device – 4 individual switches + 1 master switch Up to 30 W Power Delivery via 2× USB-C and 1× USB-A ESP32-C6 processor for fast and stable control Wi-Fi (2.4 GHz) & BLE 5.1 for flexible connectivity Schedules, timers & alarms individually configurable MQTT-compatible – ideal for smart home integrations Safety features including current limiting & behaviour in the event of a power cut The ALL3079-4 is a high-performance 4-socket smart power strip designed for professional applications in offices, server rooms or demanding smart home environments. It combines four individually controllable earth-connected sockets, modern USB fast-charging technology and comprehensive power monitoring in a single device. With a maximum total power rating of 16 A or 3680 W, multiple loads can be switched reliably. Each of the four sockets can be conveniently controlled via WebGUI, MQTT or a schedule. In addition, there are physical on/off switches directly on the power strip: four buttons for the individual sockets and a separate main switch for the entire power strip. This enables both local and remote control at any time. The integrated power meter (total measurement) measures voltage (V), current (A), power (W), frequency (Hz), power factor and reactive power – whilst taking into account all connected devices, including the USB charging ports. This means you always have a complete overview of your energy consumption. The integrated USB charging unit with 2× USB-A and 1× USB-C supports Power Delivery up to 30 W and enables fast charging of smartphones, tablets and other devices – without the need for any additional power adaptors. Thanks to the powerful ESP32-C6 processor as well as 2.4 GHz Wi-Fi and Bluetooth Low Energy 5.1, stable and flexible integration into existing networks is guaranteed. Via MQTT, the ALL3079-4 can be seamlessly integrated into professional smart home or IoT environments. Customisable timers and schedules (Mon–Sun, specific time or sunrise/sunset) as well as configurable safety and protection functions such as current limiting and behaviour following a power cut ensure maximum control and operational reliability. The following switching options are available: WebGUI click ON/OFF per socket or for all sockets MQTT (freely configurable topics per relay) HTTP API (in upcoming firmware releases) Bluetooth BLE Android APK Manual switches directly on the device (4 individual switches + 1 main switch) The following switching options are available: WebGUI Click ON/OFF on the button   MQTT  To: all-esp/ALL3079-4/508D52FEFF81/1/relais on -> payload Off all-esp/ALL3079-4/508D52FEFF81/1/relais off -> payload Bluetooth BLE Android APK https://fileshare.allnet.de/s/bMupAMdxZNv3vla  Technical specifications: Component Technical details Processor Espressif ESP32-C6-Mini-1 Switching capacity Max. 16 A / 3680 W (total power) Number of earthed sockets 4× individually switchable USB charging ports 2× USB-A 1× USB-C Max. 30 W PD fast charging Single USB Type-A port output: 30 W MAX (5 V=3 A, 9 V=3 A, 12 V=2.5 A) Single USB Type-C port output: 30 W MAX (5 V=3 A, 9 V=3 A, 12 V=2.5 A, 15 V=2 A) USB Type-A + USB Type-C Multi-Port Output: 5 V=3 A MAX Power meter Overall measurement: volts / amps / watts / Hz / power factor / reactive power Measurement includes USB consumption Communication mode Wi-Fi 2.4 GHz or BLE 5.1 Manual switches 4× On/Off per socket 1× Main switch for the entire unit Timers & schedules Individually configurable per socket (Mon–Sun, time or sun position) Protection settings Configurable current limit, definable state following a power cut Dimensions 300 mm x 65 mm x 41 mm Ambient conditions –10 °C to +35 °C Housing Plastic, white

Highlights: Kompakte Smart-Steckdose in Slim-Bauform Besonders platzsparendes Gehäuse – ideal für beengte Einbausituationen Schutzkontaktsteckdose bis 10 A / max. 2300 W mit Powermessung ESP32-C6 Prozessor für zuverlässige und stabile Steuerung WLAN (2,4 GHz) & BLE 5.1 für flexible Konnektivität Zeitpläne, Timer & Alarme individuell konfigurierbar MQTT-fähig – ideal für Smart-Home-Integrationen Integrierter Powermeter (V, A, W, Hz, Leistungsfaktor, Scheinleistung) Sicherheitsfunktionen mit Strombegrenzung & Verhalten bei Stromausfall Die intelligente Smart-Steckdose ALL3079-S ist die besonders kompakte Slim-Ausführung der ALL3079-Serie. Das "S" steht für Slim und kennzeichnet das deutlich kleinere Gehäuse, das speziell für Anwendungen mit begrenztem Platzangebot entwickelt wurde. Dank des integrierten ESP32-C6 Prozessors sowie der Unterstützung von WiFi 2,4 GHz und Bluetooth Low Energy 5.1 bietet das ALL3079-S eine stabile, schnelle und flexible Steuerung – lokal oder über Smart-Home-Systeme. Die Schutzkontaktsteckdose schaltet zuverlässig Verbraucher bis 10 A bzw. ca. 2300 W und verfügt über eine integrierte Leistungsmessung, mit der Spannung, Strom, Leistung und Energieverbrauch jederzeit überwacht werden können. Auf eine USB-Ladefunktion wurde bewusst verzichtet, um das Gehäuse besonders kompakt zu halten. Individuelle Timer- und Zeitpläne, wahlweise nach Uhrzeit oder Sonnenauf- und -untergang, ermöglichen eine weitreichende Automatisierung. Über MQTT lässt sich das ALL3079-S nahtlos in bestehende Smart-Home-Umgebungen integrieren. Zusätzliche Schutzfunktionen wie die Konfiguration des maximalen Stroms und das definierbare Verhalten bei Stromausfall sorgen für einen sicheren Betrieb. Das ALL3079-S ist die ideale Lösung, wenn kompakte Abmessungen, Smart-Home-Funktionalität und kontrollierte Schaltleistung im Vordergrund stehen. Folgende Schaltmöglichkeiten sind möglich: WebGUI – Klick ON / OFF über Button MQTT An: all-esp/ALL3079-S/XXXXXXXXXXXX/1/relais on ? payloadAus: all-esp/ALL3079-S/XXXXXXXXXXXX/1/relais off ? payload HTTP API (in kommenden Firmware-Releases) Bluetooth BLE Android APK  https://fileshare.allnet.de/s/bMupAMdxZNv3vla Komponente Technische Details Prozessor Espressif ESP32-C6-Mini-1 Schaltleistung Relais 10 A / max. 2300 W mit Powermetering Kommunikationsmodus WiFi 2.4 GHz oder BLE 5.1 LED Schaltstatus Blau = Steckdose EIN Aus = Steckdose AUS Timerfunktion Ja – konfigurierbar für EIN oder AUS Zeitpläne Mo–So, basierend auf Uhrzeit oder Sonnenaufgang/Sonnenuntergang Alarme Konfigurierbar über Zeitpläne; SMTP-Server erforderlich Schutzeinstellungen & Default-Status Maximalstrom (Ampere) und Verhalten bei Stromausfall konfigurierbar MQTT Vollständig MQTT-fähig, Topics frei konfigurierbar Integrierter Powermeter Volt / Ampere / Watt / Hz / Leistungsfaktor / Scheinleistung Taster / Schalter ON / OFF Taste Abmessungen Kompakte Slim-Bauform (kleiner als Standardversion) Umgebung -10 °C bis +35 °C Gehäuse Kunststoff, Weiß

Highlights: Enables switching of the connected load (up to 16A) via the integrated web server- New release 3.2 Wireless LAN according to IEEE802.11b/g/n with 300 Mbps & 10/100 Mbit RJ45 network connection German earthing contact plug/socket for 200 - 250 V alternating voltage Switching time, programme-controlled or manually possible The ALL3073v3 network socket can be used to switch electrical devices on and off via a computer network. The ALL3073v3 acts as an intermediate plug between the power socket and the electrical consumer. It is integrated into a computer network and receives a unique IP address. It can be configured and operated via any web browser from a PC, MAC, webpad or smartphone, regardless of a specific platform or operating system. No additional software is required. The switching operations can be programmed manually, time-controlled, etc. Several ALL3073v3s can be switched independently of each other. They also work together with other ALLNET automation solutions, such as ALL369x Powermeter, ALL3418v2, ALL3500, ALL3505, ALL4500 or ALL5000. The ALLNET ALL3073v3 adapter is also equipped with the heavily revised user interface 3.2. In addition to numerous innovations in the user interface, Release 3.2 also offers the option of quickly and easily integrating multiple ALLNET remote sensors and actuators into the control interface via JSON for the first time. This means that the sensor data can be managed across locations via a central interface, resulting in significantly greater clarity and simpler administration. In addition to the wired 10/100Mbit/s RJ45 network interface, the ALL3073v3 also has a wireless LAN interface in accordance with the IEEE802.1b/g/n standard and can therefore also be integrated into a wireless LAN network; both as a client or access point. With the server monitoring function, you can set the ALL3073v3 to monitor and reset a computer or router. A ping is sent to the registered system, if the system does not respond within a specified time, the output is switched off for an adjustable time.Examples of use: Remotely control and restart PCs and servers Restart routers remotely including automatic boot-up (dead time programmable) Time-controlled minimisation of unnecessary power consumption due to standby devices Complex switching scenarios in conjunction with other ALLNET building automation products including the influence of temperature, humidity, etc. Many other applications... Technical data: Network: 10BaseT 100BaseTX Network connection: RJ45 Supported standards: IEEE 802.3, IEEE 802.3u Protocols: HTTP/HTTPS TCP/IP Management/control: via web browser, XML, JSON Operating systems: All network-compatible operating systems Voltage range: 200 - 250 volts Switching current: max. 16 amps = 3680 ohmic load Current consumption: Idle mode: 1.5W ~2W WiFi active: 1 device connected and download approx. 1.80W ~ 2.70W How to use: Plastic housing with integrated earthing contact power socket/plug Environment: Temperature operation: 0 ~ 40 °C Humidity operating: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non-condensing) Dimensions: 125 x 68 x 40 (60) mm (height x width x depth) Weight: 200 grams (adapter only) Labelling CE