Sicherheit & Überwachung

- Mini stick-on contact with flange - Self-adhesive and screw mount - Max. Contact Resistance (OHM) = 0,2 - Max Rating Current (mA) = 500mA - Max. Switching Voltage (VDC) = 100VDC - 12 inch (30cm) side leads with AWG #24 - Magnet : NdFeB - Color : white - incl. 2 PIN-Phoenix Contact Connector for ALLNET MSR Series

Highlights:   new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use angle fixings for wall mounting   Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4452 PIR Movement detector has a max. detection angle of 92° and a max range of 8 meters. Movement detection Sensor in desktop-/ wallmounting case max. detection angle of 92°, max. range of 8 meters Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 Technical Details: Item Specification Sensor type   PIR movement detection   measuring range: max. detection angle of 92°, max. range of 8 meters Chip PCF8574 Interfaces: 2x RJ45 (I2C Bus) Multiplexing:   dial wheel for ID (8), see note below   LED Indicators: 1x PWR, 1x BUS, 1x Detetct Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4452 PIR Movement detection sensor 1x connection cable   Multiplexing - Note to the operation of several sensors on one sensor port Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more thanone sensor on a physical port. Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby. So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Highlights: New flat desktop / wall-mounted housing made of aluminium compatible with ALL34xx/3500/4500/5000 I2C bus for multiplexing use Available in either black or white Angle brackets for wall mounting Measure, control and regulate automatically and independently ALLNET has been pursuing the concept of intelligent control of building technology processes via the network and Internet for years. Intelligent building technology not only offers more comfort, but also actively promotes energy cost savings. Centrally controlled and accessible via the network / Internet, ALLNET home automation products enable intelligent building technology regardless of time and location. The ALL4454 smoke detector/sensor can also be used for the detection of gases. The Figaro TGS813 is a MOS gas sensor based on tin dioxide (SnO2) for the reliable detection of combustible gases such as methane, propane and butane. In the presence of gases, the sensor resistance changes in proportion to the gas concentration, which enables simple and cost-efficient evaluation. Thanks to its high sensitivity, good long-term stability and simple integration, the TGS813 is ideal for gas detection and safety applications in industry and building technology. Smoke detector/sensor in desktop/wall-mounted housing detects smoke and gas Aluminium housing with bracket for wall mounting Multiple multiplexing = several multiplexing modules on one line Connection: 2x RJ45 (not compatible with ALL3000/400x) Recommendation for calibration For reliable commissioning of the ALL4454/TGS813, it is recommended that the sensor is first operated in fresh, well-aerated ambient air. After a sufficient warm-up time, the current measured value is recorded as a reference value for clean air. Suitable gas or smoke detector test spray can then be used for function testing and calibration. The altered sensor value measured in the process serves as a comparison or alarm value. By comparing the measured values of clean air and gas/smoke air, the difference can be clearly determined. On this basis, threshold values, rules and actions can be reliably defined in the MSR control centre or control system. Technical data: Element Specification Sensor type Smoke/gas sensor Meßrange: 0 to 100 Chip ADS1100A3 Connection: 2x RJ45 (I2C bus) Multiplexing: Pay attention to same sensor types at the port! -  see note below LED displays: 1x PWR, 1x BUS How to use: Metal walkway Environment: Temperature operation: -45 ~ 90 °C Humidity operating: 0 % ~ 100 % (non-condensing) Storage temperature: -20 ~ 60 °C Humidity storage: 5 % ~ 90 % (non-condensing) Labelling: CE, RoHS Dimensions: 79 x 50 x 24 mm (length x width x height) Weight: 230 grams (without packaging and accessories) Packaging contents: 1x ALL4454 smoke detector / sensor 1x connection cable Multiplexing - Note on operating multiple sensors on one sensor port In contrast to the ALL3000/4000, the ARM and MIPS-based systems allow more than one sensor to be operated on one physical port. sensor on one physical port. The hardware requirement is that the sensors have 2 RJ45 connections so that the sensor signal can be forwarded to the next sensor. The total cable length of 100 metres is not increased as a result. In order for the sensors to be uniquely identified by the devices, it is necessary for them to have different I2C chip addresses on the software side . have different I2C chip addresses and IDs. Sensors with the same chip address and adjustable ID can be combined. For sensors without an adjustable address, only 1 sensor type can be connected per port.

Leakage Sensor for 3418v2/34xx/35xx/4500/5000 - Detects if leading conductive liquid is present on the floor - In the display / central unit, the display is shown in % percentage = Example: Ca. 95~100% floaters are in the water. 50% display = There is still some conductive liquid present on the floor. From 40% the threshold is pre-configured from green to red. - Connections: 2x RJ45 I2C at the sensor housing - Including 2m cable length to the floaters that register the conductivity of the liquid on the floor Example view in WebGUI: Sensor information: Installation example:

Highlights: New flat desktop / wall-mounted housing made of aluminium compatible with ALL34xx/3500/4500/5000 I2C bus for multiplexing use Available in either black or white Angle brackets for wall mounting Measure, control and regulate automatically and independently ALLNET has been pursuing the concept of intelligent control of building technology processes via the network and Internet for years. Intelligent building technology not only offers more comfort, but also actively promotes energy cost savings. Centrally controlled and accessible via the network / Internet, ALLNET home automation products enable intelligent building technology regardless of time and location. The ALL4454 smoke detector/sensor can also be used for the detection of gases. The Figaro TGS813 is a MOS gas sensor based on tin dioxide (SnO2) for the reliable detection of combustible gases such as methane, propane and butane. In the presence of gases, the sensor resistance changes in proportion to the gas concentration, which enables simple and cost-efficient evaluation. Thanks to its high sensitivity, good long-term stability and simple integration, the TGS813 is ideal for gas detection and safety applications in industry and building technology. Smoke detector/sensor in desktop/wall-mounted housing detects smoke and gas Aluminium housing with bracket for wall mounting Multiple multiplexing = several multiplexing modules on one line Connection: 2x RJ45 (not compatible with ALL3000/400x) Recommendation for calibration For reliable commissioning of the ALL4454/TGS813, it is recommended that the sensor is first operated in fresh, well-aerated ambient air. After a sufficient warm-up time, the current measured value is recorded as a reference value for clean air. Suitable gas or smoke detector test spray can then be used for function testing and calibration. The changed sensor value measured in the process serves as a comparison or alarm value. By comparing the measured values of clean air and gas/smoke air, the difference can be clearly determined. On this basis, threshold values, rules and actions can be reliably defined in the MSR control centre or control system. Technical data: Element Specification Sensor type Smoke/gas sensor Meßrange: 0 to 100 Chip ADS1100A3 Connection: 2x RJ45 (I2C bus) Multiplexing: Pay attention to same sensor types at the port! -  see note below LED displays: 1x PWR, 1x BUS How to use: Metal walkway Environment: Temperature operation: -45 ~ 90 °C Humidity operating: 0 % ~ 100 % (non-condensing) Storage temperature: -20 ~ 60 °C Humidity storage: 5 % ~ 90 % (non-condensing) Labelling: CE, RoHS Dimensions: 79 x 50 x 24 mm (length x width x height) Weight: 230 grams (without packaging and accessories) Packaging contents: 1x ALL4454 smoke detector / sensor 1x connection cable Multiplexing - Note on operating multiple sensors on one sensor port In contrast to the ALL3000/4000, the ARM and MIPS-based systems allow more than one sensor to be operated on one physical port. sensor on one physical port. The hardware requirement is that the sensors have 2 RJ45 connections so that the sensor signal can be forwarded to the next sensor. The total cable length of 100 metres is not increased as a result. In order for the sensors to be uniquely identified by the devices, it is necessary for them to have have different I2C chip addresses and IDs. Sensors with the same chip address and adjustable ID can be combined. For sensors without an adjustable address, only 1 sensor type can be connected per port.

Threshold switch for vertical installation (pen with float-ring) made ??of polyamide, resistant to gasoline, oil, brake fluid and much more. 1 m connection cable for ALL3000/ALL4000

Compatible with ALL3000/34xx/3500/400x/4500/5000 Fluid threshold for horizontal installation (hinged float) made ??of polyamide, resistant against gasoline, oil, brake fluid, etc. With 1 m cable

Compatible with ALL3000/34xx/3500/400x/4500/5000 passive infrared motion detector reliable motion detection extremely high noise immunity changeable lens is standard 90° NC tamper switch manual adjustment range (up to 15 x 15 m) creep with counter with 1 m cable

Ultra-wide 360° view lens with enhanced low-light performance and dynamic range that connects to an AI Theta Hub. 4K (8MP) resolution with ultra-wide 360° view Exceptional image quality with superb low-light performance and enhanced dynamic range Ideal for panoramic coverage of large, busy spaces such as entrances, lobbies, and retail floors Includes Standard Flush Mount for flat ceiling or wall mounting Compatible with AI Theta Pro Mounts   Technical Specifications Mechanical Dimensions Ø36.6 x 58.9 mm (Ø1.4 x 2.3”) Weight 58 g (2 oz) Enclosure material Aluminum alloy, polycarbonate Mounting material Polycarbonate Weatherproofing Indoor only Optics Sensor 8MP 1/1.8" Lens Fixed focal length View angle H: 180°, V: 180°, D: 180° Video Video compression H.264 Resolution 4MP 2160 x 2160 (1:1) Max. frame rate 24 FPS Image settings Color, brightness, sharpness, contrast, white balance, exposure control, 2DNR, 3DNR, NR by motion, masking, text overlay System Power method Theta proprietary Power supply 5V DC, 0.5A Max. power consumption 2.5W Mounting Wall, ceiling mount (Included) Flush mount (Sold separately) Ambient operating temperature 0 to 40° C (32 to 104° F) Ambient operating humidity 10 to 90% noncondensing Certifications FCC, IC, CE

compatible with ALL3000/3418v2/3500/400x/4500/5000DIN RAIL, 27 mm widthdetect noise via included condenser sensivity microphonesensivity adjustable by potentiometerAlarm is stored for 10 seconds and then will be automatically deletedincluding 1m cable

Compatible with ALL3000/34xx/3500/400x/4500/5000 DIN RAIL, 27 mm width with screwed or sticking piezo element to detect the vibrations sensitivity adjustable by potentiometer including 1 m cable

Leakage sensor for 3418v2/34xx/35xx/4500/5000 - Detects whether conductive liquid is present on the floor - The display / control centre shows the display in % = Example: Approx. 95~100% float is in the water. 50% display = There is still some conductive liquid at the bottom. From 40% the threshold value is preconfigured from green to red. - Connection: 2x RJ45 I2C on the sensor housing - incl. 2m cable length to the float which registers the conductivity of the liquid at the bottom ATTENTION: This is only the electronics suitable sensor cable is still required. (see accessories)