Umwelt- & Klimasensoren

Temperature sensor compatible with ALL3000/34xx/3500/ALL400x/4500/5000 Measuring range -55 to +80 °C, 13-bit ADC with a temperature resolution of 0.03125 °C Temperature accuracy of ± 1 °C from -25 °C to +100 °C with 1 m connection cable Exclusively only one of the following sensors possible per sensor port! ALL4454, ALL4432, ALL4421, ALL4590, ALL4532, ALL4552, ALL4522, ALL3005-6, ALL3015,ALL4006, ALL4506-7  

- compatible with ALL34xx/350x/4500/5000 - Measuring range -40...+125 °C, 0...100 %RH - resolution temperature 0,01 °C, resolution humidity: 0.01 % - Measuring accuracy Temp in whole range approx. +/- 0,6° (Typical: -20 + 90° = +/- = 0,2°) - Measuring accuracy humidity in the whole range approx. +/- 3% (Typical: 0~80% +/- 1.5%) - With 1.5 m connection cable Technical Details: Humidity Sensor Specification Parameter Condition Value Units Sensor Humidity Accuracy tolerance1 Typ. ±1.5 %RH Max. -   Repeatability2 Low, typ. 0.21 %RH Medium, typ. 0.15 %RH High, typ. 0.08 %RH Resolution Typ. 0.01 %RH Hysteresis at 25°C ±0.8 %RH Specified range3 extended4 0 to 100 %RH Response time5 t63% 86 s Long-term drift Typ.7 <0.25 %RH/yr       Temperature Sensor Specification   Parameter Condition Value Units ALL3020 Accuracy tolerance1 typ., 20°C to 60°C ±0.1 °C Max. -   Repeatability2 Low, typ. 0.15 °C Medium, typ. 0.08 °C High, typ. 0.04 °C Resolution Typ. 0.01 °C Specified Range - -40 to 125 °C Response time 8 t63% >2 s Long Term Drift max <0.03 °C/yr

Highlights: new flat desktop / wall mount case made of aluminium I2C bus for multiplexing use measuring range -40...+125 °C, 0...100 %RH resolution temperature 0,01 °C, resolution humidity: 0.01 % Measuring accuracy Temp in whole range approx. +/- 0.6° (Typical: -20 + 90° = +/- = 0.2°) Measuring accuracy humidity in the whole range approx. +/- 3% (Typical: 0~80% +/- 1,5%) ONLY COMPATIBLE WITH ALL34xx/350x/4500/5000 Angle brackets for wall mounting Measure, control and regulate automatically and independently ALLNET has been pursuing the concept of intelligent control of building technology processes via network and Internet for years. Intelligent building technology not only offers more comfort, but also actively promotes the saving of energy costs. Centrally controlled and accessible via network / Internet, ALLNET building automation products enable intelligent building technology independent of time and location.   Technical Details: Humidity Sensor Specification Parameter Condition Value Units Sensor Humidity Accuracy tolerance1 Typ. ±1.5 %RH Max. -   Repeatability2 Low, typ. 0.21 %RH Medium, typ. 0.15 %RH High, typ. 0.08 %RH Resolution Typ. 0.01 %RH Hysteresis at 25°C ±0.8 %RH Specified range3 extended4 0 to 100 %RH Response time5 t63% 86 s Long-term drift Typ.7 <0.25 %RH/yr       Temperature Sensor Specification   Parameter Condition Value Units ALL3020 Accuracy tolerance1 typ., 20°C to 60°C ±0.1 °C Max. -   Repeatability2 Low, typ. 0.15 °C Medium, typ. 0.08 °C High, typ. 0.04 °C Resolution Typ. 0.01 °C Specified Range - -40 to 125 °C Response time 8 t63% >2 s Long Term Drift max <0.03 °C/yr

Temperature sensor for ALL3000/34xx/3500/400x/4500/5000 WATERPROOF & salt water resistant Measuring range -55 to +125 °C Resolution 0.06°C 1m silicone cable with shrink cap with RJ45 Keystone socket "Art. 88971" The scope of delivery also includes 1x 20m patch cable.  

Battery-powered SuperLink sensor that detects water leaks, temperature, humidity and ambient light Power method: Lithium battery CR123A Battery life: Up to 6 years Max. Range: 2km 3.5 mm AUX socket for water leakage probe Technical data

 Highlights:  new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use either black or white available angle fixings for wall mounting Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4406 Temperature sensor has a measuring range of -40 to +85 ° C Temperature sensor in desktop-/ wallmounting case measuring range of -40 to +85 °C, resolution 0,06 °C Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 Technical Details: Item Specification Sensor type Temperature and relative humidity Temperature measuring range: -40 to +80 °C  (resolution 0,01 °C) Humidity measuring range: 0...100 % RH (resolution 0,5%) Chip: SHT71 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: pay attention about the same types of sensors on the port! -  see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4418 Temperatore sensor 1x connection cable        Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Temperature sensor for ALL3000/34xx/35xx/400x/4076/4500/5000 in desktop/wall housing Interface for connection of PT1000 temperature sensors Aluminium housing with bracket for wall mounting Multiple multiplexing = several multiplexing modules on one line Connection: 1x RJ45 input, 1x RJ45 output

Highlights:   compatible with ALL3418v2/3419/35xx/4500/5000 Carbon dioxide sensor "CO2 sensor" displays the values in ppm. Aluminium housing with bracket for wall mounting CO2 measuring range 0-40000ppm Measurement accuracy ± (30 ppm + 3% MV) / (25 °C, 400 - 10'000 ppm) Connections: 1x RJ45 input / 1x RJ45 output (no longer compatible with ALL3000/400x & ALL4504/4404 8 Port Multiplexer) ALL4471 - Sensor Module for HVAC and Indoor Air Quality Applications ALLNET Technology for IR detection enables highly accurate carbon dioxide measurement at a competitive price. Along with the NDIR measurement technology for CO2 detection. Thanks to the dual-channel principle for the measurement of carbon dioxide concentration, the sensor compensates for long-term drifts automatically by design. The very small module height allows easy integration into different applications. Carbon dioxide is a key indicator of indoor air quality. Thanks to new energy standards and better insulation, houses have be-come increasingly energy efficient, but the air quality can deteriorate rapidly. Active ventilation is needed to maintain a comfortable and healthy indoor environment, and to improve the well-being and productivity of the inhabitants. ALLNET´s ALL4471 offers accurate and stable CO2. This enables customers to develop new solutions that increase energy efficiency and simultaneously support well-being.   Technical Details: CO2 Sensor Specifications CO2 measurement range 0 - 40'000 ppm Accuracy ± (30 ppm + 3% MV) (25 °C, 400 - 10'000 ppm) Repeatability 10 ppm Temperature stability 2.5 ppm / °C (0-50 °C) Response time (t63) 20 s Humidity Sensor Specifications Relative humidity measurement range 0 - 100 % RH Typ accuracy ±3% RH (0-100% RH) Repeatability 0.1% RH Response time (t63) 8 s Electrical Specifications Supply voltage 3.3 - 5.5 V Average current  @ 2s measurement rate 19 mA Max. current 75 mA

Highlights:   new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use angle fixings for wall mounting   Measure, control and regulate automatically and independently ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs. Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location. The ALL4429 Combination sensor has a measuring range of 0 to 1023 mbar, -40 to +80 °C and 0...100 % RH Combination Sensor of air pressure/humidity/temperature in desktop-/ wallmounting case measuring range of 0 to 1023 mbar / -40 to +80 °C (resolution 0,01 °C) / 0...100 % RH (resolution 0,5%) Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 not compactible with ALL3000/ALL5000 Technical Details: Item Specification Sensor type air pressure, humidity, temperature air pressure measuring range: 0 to 1023 mbar Temperature measuring range: -40 to +80 °C  (resolution 0,01 °C) Humidity measuring range: 0...100 % RH (resolution 0,5%) Chip BMP085 + SHT71 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 Grams (only device) package content: 1x ALL4429 Combination sensor 1x connection cable     Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.  

 Highlights:  new compact aluminum desktop- / wallmounting case I2C Bus for multiplexing use either black or white available angle fixings for wall mounting Measure, control and regulate automatically and independently   ALLNET for years been pursuing the concept of intelligent control of processes in building over network and Internet. Intelligent building not only offers comfort, but actively promotes the reduction of energy costs.   Centrally managed and via network / internet accessible the ALLNET Home Automation products allow intelligent building automation regardless of time and location.   The ALL4406 Temperature sensor has a measuring range of -40 to +85 ° C   Temperature sensor in desktop-/ wallmounting case   measuring range of -40 to +85 °C, resolution 0,06 °C Aluminum housing with bracket for wall mounting Multiple multiplexing = multiple modules on one line Interfaces: 2x RJ45 Item Specification Sensor type Temperature and relative humidity Temperature measuring range: -40 to +80 °C  (resolution 0,01 °C) Humidity measuring range: 0...100 % RH (resolution 0,5%) Chip: SHT71 Interfaces: 2x RJ45 (I2C Bus) Multiplexing: pay attention about the same types of sensors on the port! -  see note below LED Indicators: 1x PWR, 1x BUS Housing: metal case Environment: Temperature operating: -45 ~ 90 °C Humidity operating: 0% ~ 100% (non condensed) Temperature storage: -20 ~ 60 °C Humidity storage: 5% ~ 90% (non condensed) Certificates: CE, RoHS Dimension: 79 x 50 x 24 mm (Length x Width x Height) Weight: 230 grams (only device) package content: 1x ALL4418 Temperatore sensor 1x connection cable        Multiplexing - Note to the operation of several sensors on one sensor port   Basically, it is for the ARM and MIPS-based systems possible, unlike to the ALL3000/4000 to operate more than one sensor on a physical port.   Standard hardware requirement is that the sensors are equipped with 2 RJ45 connectors so that the sensor signal can be continued to the next sensor. The total cable length of 100 m does not increase thereby.   So that the sensors can be uniquely identified by the devices, it is necessary that these sensors have different software-I2C chip addresses and IDs. Sensors with the same address and adjustable chip ID can be combined. For sensors without adjustable ID address only one type of sensor can be connected per port.

Temperature sensor DIN RAIL 27 mm compatible with ALL3000/34xx/3500/400x/4500/5000 temp range -40...+85 Grad C, 0,06 °C resolution

Temperature sensor for ALL34xx/35xx in desktop/wall housing Interface for the connection of PT100 temperature sensors Aluminum housing with bracket for wall mounting Multiple multiplexing = several multiplexing modules on one line Connection: 1x RJ45 input, 1x RJ45 output

Highlights: compatible with ALL34xx/35xx/4500/5000 Particulate matter sensor shows the values in µg/m3, particles per cubic cm  Aluminium housing with bracket for wall mounting Fine dust measuring range 1 to 1000 µg/m3 Measurement accuracy ±10 µg/m3 @ 0 to 100 µg/m3 / ±10 % @ 100 to 1000 µg/m3 Connections: 1x RJ45 input / 1x RJ45 output (no longer compatible with ALL3000/400x & ALL4504/4404 8 Port Multiplexer) Particulate Matter Sensor ALL4472 For HVAC and Air Quality Applications With this new particulate matter sensor, ALLNET expands its range of environmental sensing solutions and opens up a new dimension in indoor and outdoor air quality applications. The ALL4472 particulate matter (PM) sensor represents a new technological breakthrough in optical PM sensors. Its measurement principle is based on laser scattering and makes use of ALLNET's innovative contamination-resistance technology. This technology, together with high-quality and long-lasting components, enables accurate measurements from the device's first operation and throughout its lifetime of more than eight years. PM2.5 and PM10 refer to particulate matter with particle diameter up to 2.5 microns and 10 microns, respectively, and are among the most dangerous air pollutants. Due to their small size, PM2.5 particles can travel deep into the human lung and cause a variety of health issues; for instance, by triggering asthma attacks or contributing to cardiovascular disease. The ALL4472 will enable the implementation of innovative air quality monitoring devices that prevent air pollution damage.  Technical Details: Particulate Matter Sensor Specifications Mass concentration accuracy1 ±10 μg/m3 @ 0 to 100 μg/m3 ±10 % @ 100 to 1000 μg/m3 Mass concentration range 1 to 1000 μg/m3 Mass concentration resolution 1 μg/m3 Particle detection size range2 Mass concentration:   PM1.0, PM2.5, PM4 and PM10 Number concentration:  PM0.5, PM1.0, PM2.5, PM4 and PM10 Lower limit of detection 0.3 μm Minimum sampling interval 1 sec (continuous mode) Lifetime > 8 years operating continuously 24h/day Dimensions 40.6 x 40.6 x 12.2 mm3 Operating temperature range -10 to +60 °C Storage temperature range -40 to +70 °C Electrical Specifications Interface UART, I2C, RJ45 "ALLNET" Supply voltage 4.5 – 5.5 V Average supply current @ 1 Hz measurement rate < 60 mA 1 Specified for PM2.5 at 25 °C using potassium chloride salt particles and the TSI DustTrakTM DRX Aerosol Monitor 8533 as a reference. 2 PMx defines particles with a size smaller than "x" micrometers (e.g., PM2.5 = particles smaller than 2.5 μm).

Highlights: Maintenance-free and long service life Compact size with 8,5cm diameter no moving parts therefore no wear due to the integrated ultrasonic sensors 20m long connection cable from central unit to sensor Protrokollierung of the measured values in the central unit possible export of the sensors as CSV or optional with module via FTP or to the cloud The ALL3420 Ultrasonic Wind Speed and Direction Sensor is a measuring device that can be used to detect the wind speed and direction in the outdoor air. The sensor is designed to be mounted at the highest point of your building to detect and measure/log the wind direction and speed, etc. The sensor can also be used to measure the wind speed and direction. Based on this data, you can then use the optional ALLNET MSR devices to switch/retract the blinds or other actuators to prevent damage to the building.   Place of use: At the highest point of your building to retract blinds & awnings in case of danger. Weather station for meterological purposes Weather station for agriculture and farmers Weather station for construction sites / cranes etc.  weather station at the beach any kind of wind alarm / measurement Technical Details: Element Specification Interfaces: 1x NMEA RS485 Wind speed & Wind direction sensor 1x I2C sensor port for optional ALLNET sensors or actuators 1x 100Mbit RJ45 LAN with integrated PoE IEEE802.3af 1x USB 2.0 Type A 1x RJ45 for console (programmer/interface) 1x 5,5mm/2,1mm DC Female for 12V/1A power supply Measuring range: 0-40m/s (wind speed) 0-359° (wind direction) Precision: Low wind speed:(0-5)m/s:±0.5m/s (wind speed) High wind speed:(5-40)m/s:±1m/s (wind speed) Lowwindspeed:(0-5)m/s:±0.5° (wind direction) Highwindspeed:(5-40)m/s:±3° (wind direction) resolution factor: 0.1m/s (wind speed) 1° (wind direction) Cable lenght: 20m Cable (from IP Main unit to the sensor) Network connection: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN Chipset 2.4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power supply: 100~240 VAC, 50/60 Hz, 12V / 1A external power adapter Power consumption: <3 watts maximum Housing: Metal Environment: Operating temperature: 0 ~ 40 °C (IP Mainunit) Operating temperature: -40° ~ +70° (Windsensor IP65) Operating humidity: 10% ~ 85% (non-condensing) Operating humidity: 0 ~ 100% (Windsensor IP65) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Marks CE, RoHS, RED Dimensions: IP65 Windsensor 11cm (height) x 8,5cm (diameter) Ø5cm diameter socket to the mount Mounting Kit 19,6cm (height) x 11cm (feet) Ø5,6cm diameter for windsensor IP Main-Unit 9,3cm (width) x 8,7cm (length) x 2,7cm (height) Weight: 2,5kg Package contents: - IP Mainunit ALL3420 - ALL3420 Ultrasonic Sensor - Mount  - 20m Cable to the Sensor - Power supply external "12VDC / 1A - Patchcable - WiFi Antenna - QIG