USB-Isolatoren

Key features: Gigabit Ethernet (10/100/1000 Mbit/s) IEEE 802.3ab compliant 4 kVrms dielectric strength Electrical isolation: creepage distance: 12.8 mm, clear distance: 12.2 mm no restrictions on cable length ESD protection: Suppression of transient overvoltages on signal lines Suitable for devices with a supply voltage of up to 250 Vrms Not suitable for use with PoE devices Dimensions 80x58x24mm Plug & Play – no installation required Compact and universally applicable No permanently fitted cables Robust housing Suitable for all systems with a network connection Requires no power supply APPLICATIONS: EQUIPMENT PROTECTION Protection of particularly valuable equipment against hum and overvoltages from network peripherals. MEASUREMENT TECHNOLOGY Protection of electrical measurement and monitoring equipment against external and interference voltages from the Ethernet cabling. POTENTIAL DIFFERENTIALS (BUILDING SERVICES) Prevention of equipotential bonding currents in computer systems that are galvanically connected to one another over long distances via Ethernet cabling. AUDIO Reduction of low-frequency alternating voltages (mains hum) caused by the network connection to a level that is no longer perceptible. Robust housing suitable for all systems with a network connection requires no power supply Technical Details: Dielectric strength of signal and shielding 5,000 V 50/60 Hz for 1 min; 10,000 VDC for 10 s Data throughput 10/100/1000 Mbit/s Connections 2x RJ45 input/output Network specifications IEEE 803.2 from 10/100/1000-BaseT, twisted pair, auto-configuration (behaves completely transparently within the network) Material UL94V-0/RoHS-compliant/SvHC/REACH Product Rating (UL) Passive electronic components, insulation class DI (250 VAC/300 VDC) tested at 4 kVAC Operating mode Continuous operation Mean time between failures 0.21 × 108 (1 failure in 21,000,000 h) ESD 16 kV DC stress test (10 s) 10 kV Return loss min. 10 dB Insertion loss max. 1.3 dB Dimensions (mm, LxWxH) 80 x 58 x 24, approx. 39 g Standards IEC 60601-1 1x MOPP up to 250 Vrms (the built-in mains transformer) Environment Operating: -10°C ~ +75°C Storage: -20°C ~ +75°C 10% ~ 85% relative humidity (non-condensing)

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Variant of the ADQ-USB 3.0-ISO with wide-range input from 10 V to 36 V to supply the USB device. Ideal for mobile use in cars or lorries, in industrial control environments and wherever there is no 5 V supply available. Application examples Potential separation between measuring devices and PC Effective suppression of ground loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling different earth potentials in industrial control technology Can also be used as a power injector for USB devices that are normally supplied via the USB port, but this does not provide sufficient power for reliable operation of the USB device** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5 Gbit/s Re-clocking technology for all speeds Backwards compatible with USB 2.0/1.1/1.0*** Isolation voltage*: 1.6 kVDC (60 s) Maximum current for USB 3.0 devices: max. 900 mA (with external supply) USB connection: Host: USB 3.0 type B socket Device: USB 3.0 type A socket Operating temperature: -20°C..+70°C Relative humidity: max. 95% Robust aluminium housing with rubber bumper Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Optional mounting kit for DIN rail Scope of delivery USB 3.0 SuperSpeed isolator 2-pin mating connector with locking mechanism USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed Safety note: This model is not approved for medical applications.     *ADQ-USB 3.0-ISO(-PS): 1 kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6 kVDC (60 s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5 V plug-in power supply included in the scope of delivery. ADQ-USB 3.0-ISO-W: External power supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the device side (downstream). The cascading of multiple USB isolators is not supported.

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Application examples Potential separation between measuring instruments and PC Effective suppression of hum loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling of different ground potentials in industrial control technology Also usable as "power injector" for USB devices which are normally powered via the USB port, but which does not provide sufficient power for reliable operation of the USB device ** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5?Gbit/s Re-Clocking technology for all speeds Download compatible with USB 2.0/1.1/1.0*** insulation voltage*: up to 1?kVDC permanent! Maximum power for USB 3.0 devices: Without external power supply: max. 200?mA With external power supply: max. 900?mA USB connection: Host: USB 3.0 Type B socket Device: USB 3.0 Type A socket Operating temperature: -20°C..+70°C Rel. air humidity: max. 95% Robust aluminium chassis with rubber buffer Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Safety instruction: This model is not approved for medical device applications.    *ADQ-USB 3.0-ISO(-PS): 1?kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6?kVDC (60?s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5?V plug-in power supply included in delivery. ADQ-USB 3.0-ISO-W: External supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the downstream side. The cascading of multiple USB isolators is not supported. Scope of delivery: USB 3.0 SuperSpeed Isolator Matching plug-in power supply (5?VDC/1.4?A) with 5.5?mm low-voltage connector with bayonet connection USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Application examples Potential isolation between measuring devices and PC Effective suppression of ground loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling different earth potentials in industrial control technology Can also be used as a power injector for USB devices that are normally supplied via the USB port, but this does not provide sufficient power for reliable operation of the USB device** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5 Gbps Re-clocking technology for all speeds Backward compatible with USB 2.0/1.1/1.0*** Isolation voltage (data and supply)*: up to 1?kV permanently! Maximum current for USB 3.0 devices: Without external power supply: max. 200?mA With external power supply: max. 900?mA USB connection: Host: USB 3.0 type B socket Device: USB 3.0 type A socket Operating temperature: -20°C..+70°C Relative humidity: max. 95% Robust aluminium housing with rubber bumper Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Optional mounting kit for DIN rail Scope of delivery USB 3.0 SuperSpeed isolator USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed Safety note: This model is not approved for medical applications.     *ADQ-USB 3.0-ISO(-PS): 1?kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6?kVDC (60?s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5?V plug-in power supply included. ADQ-USB 3.0-ISO-W: External power supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the device side (downstream). The cascading of multiple USB isolators is not supported.

Montagekit für ADQ-USB-ISO-Serie auf DIN-Hutschiene Der Montagekit dient der schnellen und sicheren Befestigung der ALLDAQ USB-Isolatoren auf DIN-Hutschiene. Bei Bedarf können Sie die Halterung mit einer Edelstahlplatte montieren um mittels Kabelbinder die Kabel zu fixieren. Kit bestehend aus: Kunststoffwanne (blau) Hutschienenklammer / Tragschienenadapter (TS35), 45 mm breit Stabile Zugentlastung aus Edelstahl Geeignet für alle ALLDAQ USB-Isolatoren der ADQ-USB-ISO-Serie. Hutschiene nicht im Lieferumfang.

Simple Adapter between H-MTD and USB Connector

Super Speed-MUXER 1:2 for Broad-R-Reach 1x ADQ-Link IN; 1x ADQ-Link OUT

Multiplexer Box for MUX/DEMUX Two 4:1 2 Channel Multiplexer Dual Powersupply Range +/-22V Single Powersupply Range 0-44V Interface: 1x ADQ-Link IN; 1x ADQ-Link OUT

USB 3.0 SuperSpeed isolator for galvanic isolation - ideal for measurement technology, industry, automotive and audio technology Application examples Potential isolation between measuring devices and PC Effective suppression of ground loops - ideal for music studios and event technology Protection against voltage peaks in the automotive sector, e.g. when testing control units Decoupling different earth potentials in industrial control technology Can also be used as a power injector for USB devices that are normally supplied via the USB port, but this does not provide sufficient power for reliable operation of the USB device** Features Latest isolator technology supports SuperSpeed USB 3.0 devices up to 5 Gbps Re-clocking technology for all speeds Backward compatible with USB 2.0/1.1/1.0*** Isolation voltage*: up to 1?kVDC permanently! Maximum current for USB 3.0 devices: Without external power supply: max. 200?mA With external power supply: max. 900?mA USB connection: Host: USB 3.0 type B socket Device: USB 3.0 type A socket Operating temperature: -20°C..+70°C Relative humidity: max. 95% Robust aluminium housing with rubber bumper Dimensions (L x W x H): 90 mm x 62 mm x 32 mm Operating system support: Windows, MAC OS and Linux Security note: This model is not approved for medical applications.     *ADQ-USB 3.0-ISO(-PS): 1?kVDC (continuous) / 1.5 kVAC <60 Hz (60s), ADQ-USB 3.0-ISO-W: 1.6?kVDC (60?s). Higher insulation voltage on request.  **ADQ-USB 3.0-ISO-PS: 5?V plug-in power supply included. ADQ-USB 3.0-ISO-W: External power supply must be provided.***When connected to a USB 2.0 host (upstream), no USB 3.0 devices are accepted on the device side (downstream). The cascading of multiple USB isolators is not supported. Scope of delivery: USB 3.0 SuperSpeed isolator Matching US plug-in power supply (5?VDC/1.4?A) with 5.5?mm low-voltage connector with bayonet lock USB 3.0 cable (USB 3.0-A plug to USB 3.0-B plug), length: 1.5 m Quick guide printed

USB 2.0 high-speed isolator for galvanic isolation - ideal for measurement technology and audio applications Supports high-speed USB 2.0 devices up to 480?Mbit/s Protection against overvoltage for computers and USB devices Effectively interrupt ground loops Features USB 2.0 high-speed isolator uses the latest isolator technology for data rates up to 480?Mbit/s (USB 1.0/1.1 compatible) Automatic detection of the transfer rate Bidirectional communication Isolation: 500?V / <?60?Hz (permanent) Overvoltage protection: max. 680?V Supply for USB device: Without ext. supply max. 300?mA With ext. 5?V supply (opt.): max. 1?A USB connection: Host: USB 2.0 type B socket Device: USB 2.0 type A socket Operating temperature: -40°C..+75°C Storage temperature: -55°C..+125°C Relative humidity: max. 95% Robust aluminium housing Dimensions incl. rubber buffer (L x W x H): 90 mm x 62 mm x 32 mm Operating system-independent - no drivers need to be installed Scope of delivery USB 2.0 high-speed isolator USB cable (USB 2.0-A plug to USB 2.0-B plug) with ferrite core (length: 0.5 m) Quick start guide Safety note: This model is not approved for medical applications. Medical certification according to UL 1577 on request.

Super Speed-MUXER 1:2 for USB 2.0 & USB 3.x VBus output to ADQ-4x 1x ADQ-Link IN; 1x ADQ-Link OUT

Isolated 5V power supply

Simple Bridge between 2 H-MTD Connectors

ALLDAQ US-connector for 5V ISO power supply