Media converters - 100Mbit

ALLNET Media Converter PoE (15.4W/30W) to 1000BASE-SX/LX Single-/ Multimode SFP Mini-GBIC Connector "ALL-MC202P-SFP Highlights: 1x 10/100/1000BaseT Ethernet TP port with IEEE802.3at max. 30W PoE; 1x 1000BaseSX/LX SFP slot TP port supports Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation SFP slot supports multi or single mode SFP (mini Gbic) modules Ethernet 802.3x flow control extended temperature range -20° ~ +60° Power supply included The ALL-MC202P-SFP1-PoE is an IEEE 802.3at / 802.3af Power over Ethernet Injector that provide DC 52V over Ethernet cables. To inserts DC Voltage into Cat.5 / 5e / 6 cables, allowing the cable between the Injector (RM202-1GF1GT) and PoE PD (Powered Device) to transfer data and power simultaneously. The maximum distance between the Injector (RM202-1GF1GT) and PoE PD is 100 meters. The ALL-MC202P-SFP1-PoE is combines the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at / 802.3af Power over Ethernet Injector. And using the Power over Ethernet splitter, it can separate the digital data and the power into two outputs. The benefits of ALL-MC202P-SFP1-PoE are like cost saving, easy for networking planning and higher reliability. What’s more, upon any IEEE 802.3at / 802.3af devices installed, the ALL-MC202P-SFP1-PoE or PD all can make the connection while migrating and the Ethernet digital packets, such as connecting the ALL-MC202P-SFP1-PoE to an IEEE 802.3at / 802.3af complied devices, wireless AP or IP Camera. Link Fault Pass Through (LFP) The LFP function includes the Link Fault Pass Through function (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function. LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter’s fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter’s fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. Link Loss Carry Forward (LLCF) RM202-1GF1GT incorporates an LLCF function for troubleshooting a remote connection. When LFP function is enabled, the FL / TP ports do not transmit a link signal until they receive a link signal from the opposite port. The diagram below shows a typical network configuration with a good link status using RM202-1GF1GT for remote connectivity. If the connection breaks, RM202-1GF1GT that link loss forward to the Switch / Hub that generates a trap to the management station. The administrator can then determine the source of the problem. Link Loss Return (LLR) The fiber ports of RM202-1GF1GT have been designed with an LLR function for troubleshooting a remote connection. LLR works in conjunction with LLCF. When LFP function is enabled, the port’s transmitter shuts down when its receiver fails to detect a valid receive link. LLR should only be enabled on one end of the link and is typically enabled on either the unmanaged or remote device. The diagram below shows a typical network configuration with a good link status using RM202-1GF1GT for remote connectivity. Note that LLR and LLCF are enabled as indicated in the diagram. If one of the optical conductors is down (as shown in the diagram box below), the converter with LLR function will return a no-link condition to its link partner. With LLCF function also enabled, the no-link condition is carried forward to the switch/ hub where a trap is generated to the management station, and the administrator can then determine the source of the loss. Technical Details: Element Spezifization Standards: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3x Flow Control Network connections: 1x 10/100/1000BaseT (RJ-45) 1x 1000BaseSX/LX SFP Module Slot Data transmission rate: Half/Full-Duplex on TP PoE: IEEE802.3at/af compatible Transmission media: P:10/100/1000BaseT Cat. 5, 5E, 6 UTP/STP, bis zu 100 m 1000BaseSX: 62.5/125µm Multi Mode LWL, bis zu 220 m 50/125µm Multi Mode LWL, bis zu 550 m 1000BaseLX: 9/125µm Single Mode LWL LED: PWR, FX LNK/ACT, TP LNK/ACT, PoE in Use Power supply: DC 52V/1,25A external PSU Dimensions: 95 x 70 x 25mm Environment: Operating temperature: -20 ~ 60 °C Operating Humidity: 5% ~ 95% (non condensing) Storage temperature -40 ~ 85 °C Storage Humidity: 5% ~ 95% (non-condensing) Marks: CE

Highlights: 1x 10/100BaseTX Ethernet TP Port; 1x 100BaseFX Ethernet Fiber Port TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation 1x 100BaseFX Fiber Port support Multi Mode SC Ethernet 802.3x Flow Control Technical Features: Item Specification Standards:   IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/100BaseFX IEEE 802.3x FLow Control Features: 1x 10/100BaseT with RJ-45 Connector 1x 100BaseFX with Fiber Connector MM,SC Data Transfer Rate: Ethernet: 10Mbps/Half-Duplex; 20Mbps/Full-Duplex Fast Ethernet: 100Mbps/Half-Duplex; 200Mbps/Full-Duplex Transmission Media: 10BaseT Cat. 3, 4, 5 UTP/STP, up to 100 m 100BaseTX Cat. 5 UTP/STP, up to 100 m 100BaseFX: 50/125µm or 62.5/125µm Multi Mode SC-Type Fiber optic cable, up to 2 km Led Indicators: 1x Power on Per Port:(TX): Link, TX ; (FX): Link, RX Power Requirement: DC 5V/2A external Power Supply Power consumption: 3 Watts (Max) Dimensions: 94 × 71 × 26 mm (L x W x H) Weight: 230g (only WC) Environment: Temperature operarting: 0 ~ 50 °C Humidity operating: 10% ~ 90% (non-condensing) Temperature storage: -20 ~ 70 °C Humidity storage: 10% ~ 90% (non-condensing) Certifications: CE

Highlights: Outdoor IP68 Gigabit Repeater 1x 10/100/1000M PoE (IEEE802.3at POE+) INPUT 1x 10/100/1000M PoE (IEEE802.3at POE+) OUTPUT Max. OUTPUT Power 25W,  PoE Pin 1/2(+) 3/6 (-) Outdoor Temperature Range: -25°C bis +55°C Power over Ethernet, simply expand by 100m. The Power Over Ethernet Repeater ALLNET ALL-PR2012P-E extends the PoE and network range by another 100m. Depending on the PoE input power, up to 4 repeaters can be connected in series. We recommend e.g. the ALLNET ALL0489v3 PoE injector for the output power or any other PoE IEEE802.3at switch.   Technical Details: IEEE Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ Network Connector: 1x 10/100/1000M PoE (IEEE802.3at POE+) INPUT 1x 10/100/1000M PoE (IEEE802.3at POE+) OUTPUT Power over Ethernet input: Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+) Power over Ethernet output: Pin Assignment and Polarity: 1/2 (+), 3/6 (-) Output power: up to 25W Maximum Distance: Expand Range up to max. 100m Connectors: Waterproof RJ-45, EIA 568A and 568B Network cables: Outdoor type shielded category 5 (or higher) Dimensions: 185mm x 45mm x 45mm Mounting: Wall or Shelf Environment: Indoor or Outdoor Environmental Conditions: Operating Ambient Temperature: -25 to 55°C Operating Humidity: Maximum 90%, noncondensing Storage Temperature: -30 to 70°C Storage Humidity: Maximum 95%, noncondensing

Highlights: Hardened Industrial 95W Power Booster Boost Voltage from 24VDC to 55VDC to deliver 95Watts power to your PD Input voltage 24VDC Output Voltage 48VDC to 55VDC with voltage adjustable knob Operating temp: -40°C to +75°C Introduction This Rugged design 95 Watts Power Booster is a power device which boost 24VDC to 55VDC to power up your PD up to 95Watts. It is designed for environments where 48VDC is not available. This means that it can deliver 95Watts power in 24VDC environment. With all industrial graded components, this industrial power booster will guaranty a steady voltage output to your PD in a harsh environment. It is being rigorously tested for your Security, Transportation and Telco application. Technical Details:   LED PWR: Green: ON- power ready. OFF – no power input Overload current protection Present Removable Terminal Block / Power Connector 4 pin terminal block. 24VDC Voltage Input, 2 pin for 48 to 55 VDC Voltage output Removable Terminal Block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire(AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm Voltage Adjustable Knob To adjust voltage output from 55VDC to 48VDC to meet your existing application Booster Power Maximum Booster power 95watts at 24VDC input Operating Temperature -40°~75° C fully tested. Operating Humidity 5% to 95% (Non-condensing) Storage Temperature -40°~85° Housing Rugged Metal, IP30 Protection Case Dimension (L X W X D)mm 59x36x49mm (LxWxD) Installation mounting DIN Rail mounting and Wall Mounting   Certifications:   Safety IEC EN60950-1 EMC/EMS  CE, FCC, VCCI EMI FCC Part 15 Subpart B Class A, CE EN 55022 Class A EN 50155 / EN 60068-2-6 Vibration EN 50155 / EN 60068-2-27 Shock EN 50155 / EN 60068-2-32 Free Fall

Highlights: 60 Watt PoE IP67 outdoor injector according to IEEE802.3bt standard IP67 weatherproof & IK10 shockproof for robust outdoor installations 1x 10/100/1000/2500Base-TX PoE output according to IEEE802.3af/at/bt 60W 1x AC 100~240V input voltage on 2PIN terminal (AC connection cable must be installed by the customer, thus flexible in installation) Extended operating temperature: -20°C to +60°C This product is an outdoor Gigabit Power-over-Ethernet (PoE) device for powering most common IP end devices. The injector is fully compliant with the IEEE 802.3af/at/bt standard. The device also fulfils the IP67 protection class, making it weatherproof and easy to use outdoors. The injector is shock-resistant thanks to the IK10 standard, which ensures reliable and safe use, even in industrial environments. Compared to the previous version (v1), the ALL-PI2013Ov2BT60 now has a 2.5GBase-T connection and therefore enables a significantly higher data transfer rate. It transmits the required electrical energy and realises the data exchange via an RJ45 cable with a maximum transmission distance of 100 metres. The injector automatically recognises which PoE standard is present at the end device on the output side and regulates the voltage accordingly. The injector can supply a PoE end device at the output with a maximum power of 60W in accordance with the IEEE 802.3bt standard. Technical details: Technical details: Model: ALL-PI2013OBT60 - 60W waterproof PoE injector AC to BT 60W IEEE standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ IEEE802.3bt Network Media (Cable): 10BASE-T: UTP category 3,4,5 cable (=100m)  100BASE-TX: UTP category 5 cable (=100m)  1000BASE-T: UTP category 5e cable (=100m) 2500BASE-T: FTP category 6/6a cable (=100m) Network Connector:   1xRJ-45 10/100/1000BaseT(X) Data 1xRJ-45 10/100/1000/2500BaseT(X) PSE with POE Output power IEEE802.3bt 60W Input current: 1.5A Max Power input: AC 100-240V 50/60Hz 2 PIN terminal PoE Power output: 60W Max. IEEE802.3bt POE Pin Assignment RJ45: 1/2(-), 3/6(+) Output Voltage: DC 55V±5% Output ripple voltage: =200mV,Test conditions: rated input voltage, full load output, Tested with 20MHz bandwidth oscilloscope, Parallel connected a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to the output Output current: 1.1A Max LED Indicator: PWR(Green) , PoE(Bt:Green,UPoE:orange) Dimming: 150 x 73 x 44mm Operating Temperature: -20°C ~ 60°C Storage Temperature: -40°C ~ 80°C Surge Protection: Difference Mode:±4KV, Common mode:±6KV MTBF: <50000 hours Electrostatic standard: Contact 6KV, air 8KV Waterproof grade: IP67 impact protection rating IK10

TP-Link - MC100CM - 10/100 Mbps RJ45 to 100 Mbps Multi-mode SC Fiber Converter PORT: 1× 100 Mbps SC Port, 1× 10/100 M RJ45 Port (Auto MDI/MDIX) SPEC: Full-duplex, Up to 2 km, Chassis TL-MC1400 Rack-mountable

Highlights: Robust industrial 200W "power booster" Voltage boost from 12V DC to 54V DC to supply the PD devices with max. 100W Voltage boost from 24V DC to 54V DC to supply the PD devices with max. 200W Input voltage 12~24V DC Output voltage variably adjustable from 48V DC to 54V DC (rotary knob/screwdriver flat front) Extended operating temperature: -40°C to +75°C This PoE Voltage Booster is a rugged and versatile solution for demanding environments. It raises the low input voltage to provide PoE to end devices to guarantee a steady voltage output to your PD in a harsh environment. With input voltage range 12~24VDC, it efficiently boosts the voltage to 52~54VDC and delivering 100W of power; alternatively, with input voltage range 24~48VDC, it boost the voltage to 52~54VDC and  providing a robust power output of 200W. With an adjustable voltage knob, you can fine-tune the output voltage between 52VDC to 54VDC to match your device's requirements. It’s tested rigorously for security, transportation, and telco applications, this power booster ensures reliable operation in harsh conditions. Experience enhanced power delivery with the Hardened Industrial 100W/200W Power Booster. Housing Dimension (mm) Technical Details LED PWR(Amber) ON– power ready. OFF – no power input Overload current protection Present Removable Terminal Block / Power Connector 4 pin terminal block. 2 pin for 12~48VDC Voltage Input 2 pin for 52~54 VDC Voltage output Removable Terminal Block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm Voltage Adjustable Knob To adjust voltage output from 52VDC to 54VDC to meet your existing application Booster Power Maximum Booster power 100watts at 12~24VDC input Maximum Booster power 200watts at 24~48VDC input Operating Temperature -40°C to +75°C fully tested. Operating Humidity 5% to 95% (Non-condensing) Storage Temperature -40°C to +85°C Housing Rugged Metal, IP30 Protection Case Dimension (L X W X D) mm 103.5 x 32 x 81.5 mm (LxWxD) Installation mounting DIN-Rail and wall mount brackets included Certifications Safety LVD (EN62368-1) EMC FCC/CE EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 6KV; Air: 8KV IEC 61000-4-4 EFT: Power: 2KV; Signal: 2KV IEC 61000-4-5 Surge: Power: 4KV; Signal: 2KV Vibration EN 60068-2-6 Shock EN 60068-2-27 Free Fall EN 60068-2-32

Highlights: 2x ports RS232/422/485 changeable by DIP switch Low Voltage range of 5~36v DC Data rates range of 600~230.4kbps Introduction of 2 ports RS232/485/422 Serial Device Server ALL-SDS102 is a dual serial device server, which can realize transparent transmission between TCP/UDP data packet and RS232/RS485/RS422 interface. The device has unique functions such as network printing, Modbus multi-host polling and watchdog mechanism. ALL-SDS102 is based on ARM processor and internally integrated with TCP/IP protocol. The user can easily realize the networking of embedded devices. Features of the 2 Ports RS232/485/422 Serial Device Server Cortex-M4 kernel, industrial working temperature range and TCPIP protocol stack. Auto-MDI/MDIX,RJ45 port with 10/100Mbps TCP Server,TCP Client,UDP Client,UDP Server and HTTPD Client working mode Supports network printing Supports Modbus multi-host polling Two ports can work independently at the same time Supports Modbus RTU to Modbus TCP Can distinguish which serial port is connected to the device by port number. Supports virtual serial port and provides the corresponding software USR-VCOM Serial baud rate from 600bps to 230.4K bps;Check bit of None,Odd,Even,Mark and Space. DNS and DHCP supported Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS. Built-in web page; can also customize the web page for users Reload button, a key to restore default settings RJ45 with link/data indicator light, built-in isolation transformer, and 2 KV electromagnetic isolation IEEE purchased global unique MAC address (starting with D8-B0-4C); user can define the MAC address. Supports firmware upgrades over the network Supports keepalive, quickly detects dead links Support account and password, can be used to login and network settings page Supports one channel websocket, realizes bidirectional transparent transmission between web page and serial 0 Two serial ports;each serial can work as rs232,rs485 or rs422;DB9 socket;provide RS485/RS422 converter Two channel serial communication display: TX/RX Support DC adapter Supports UDP broadcast function Simple Transparent transmission Transparent transmission means that whatever is transmitted, our device plays the role of a channel and sends data to the destination unchanged. On-site monitoring devices send data to Serial Device Servers transparent data transmission terminal, the terminal CUP receives data via serial port and packet data. Different parameterization methods Software Settings Download settings software, search related Serial Device Servers in the LAN through the serial port server IP, name, MAC address, or the version number. Then set the parameters you need, otherwise keep the default. Web-page Settings Open your browser and inter the default IP address of the Serial Device Servers. Open the login page of Serial Server, Enter the user name and password (default admin). After setting parameter, Click Save and Restart, then setting will take effect. Serial AT commands Settings User can set parameter by module itself without going through another computer to configure. This setting method is used in the following situation: user have to configure IP address and destination IP address on site. AT command can meet the demand. After MCU connects serial server module by TTL (UART), MCU can configure setting by AT command. Application Field of 2 ports RS232/485/422 Serial Device Servers Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring Work Modes TCP Server Serial to Ethernet servers ALL-SDS102x listens on the setting port and waits for a TCP client connection. The data which the serial ports sent out transparently transmit to all connected TCP clients via ALL-SDS102/102v2 Technical Details: System Information   Processor Cortex-M4 Basic Frequency 120MHz Flash 512K byte Ethernet   Port Number 1 Interface Standard RJ45 Rate 10/100 Mbps MDI/MDIX, auto switch between cross and direct connection Protection 2KV electromagnetism isolation, shell insulation blocking Network Protocol IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, Websocket, HTTPD Client Receive Buffer Max 16k bytes buffer Serial   Port Number 2 (RS232/485/422*2), 2 serial ports can simultaneously work at the different working modes. Interface Standard RS-232: TX/RX/RTS/CTS RS-485: A+/B- RS422: TX+/TX-/RX+/RX- Data Bits 5, 6, 7, 8 Stop Bit 1, 2 Check Bit None, Even, Odd, Space, Mark Baud Rate 600 bps ~ 230K bps Flow Control RTS/CTS/Xon/Xoff Buffer Send and receive 2k bytes respectively Protection ESD protection, anti-surge SocketA   Transparent Transmission Mode TCP Server/TCP Client/UDP Server/UDP Client Supported Function Networking printing, Modbus Gateway, USR-Cloud, self-defined registration package, self-defined network and serial heartbeat package SocketB TCP Client/UDP Client Software   Virtual Serial(USR-VCOM) Windows 2000 or higher (32 bit/64 bit) Configuration Built-in webpage, computer set-up software, serial command Basic Parameter   Size 150 x 79 x 30 mm Operating Temp. -40 ~ 85°C Storage Temp. -45 ~ 105°C, 5 ~ 95% RH Input Voltage DC 5 ~ 36V Working Current 95mA (aver) @ 5V 45mA (aver) @ 12V Power <1W More   Certificate CE, FCC, ROHS, KCC Accessory 12V power supply, serial line, cable, converter

Highlights: Outdoor-capable according to IP67 (dustproof & water-protected) Extension of PoE networks to up to 300 m 1x Gigabit PoE input (IEEE 802.3bt) 2x Gigabit PoE output (IEEE 802.3af/at) Total power up to 70 watts Extended temperature range: -20 °C to +60 °C Rugged, compact design for outdoor use ALL-PR2013O-30W – Outdoor PoE repeater for a range of up to 300 m The ALL-PR2013O-30W is the ideal solution when PoE connections need to be reliably realised over long distances. As a compact Outdoor PoE Repeater / 2-Port PoE Switch, it extends existing networks by up to 100 metres per device – and thus enables ranges of up to 300 metres. Thanks to the active signal refresh, the data and power transmission is reprocessed in a stable manner - perfect for demanding outdoor installations without the need for an external power supply. Typical application scenarios Power supply for IP cameras and access points in the outdoor area Connection of two IP cameras with only one supply line Realisation of emergency or IP telephones outside buildings Network connections between buildings or remote areas Mode of operation The repeater is powered via IEEE 802.3bt (PoE++) and outputs PoE according to IEEE 802.3af/at with up to 70 watts total power at the outputs. Thanks to the active signal amplification, the classic 100 m Ethernet limit can be reliably extended. An additional advantage: The outdoor repeater enables the connection of two PoE end devices via just one laid cable, so no additional drilling or second cables are required – ideal for clean and cost-efficient outdoor installations.  Important: A PoE BT (802.3bt) feed is required for operation. Technical details: Model ALL-PR2013O-30W Standard IEEE802.3 IEEE802.3u IEEE802.3ab IEEE802.3x IEEE802.3af IEEE802.3at IEEE802.3bt Port PoE in port:1 x 10/100/1000Mbps RJ45 port PoE out port : 2 x 10/100/1000Mbps RJ45 port Network Media(Cable) 10BASE-T: UTP category 3,4, 5 cable (=100m) 100BASE-TX: UTP category 5.5e cable (=100m) 1000BASE-TX: UTP category5e cable (=100m) LED LAN PoE Standard IEEE802.3af/at/bt Dimensions (L*W*H) 150*73*44MM RJ45 PoE PoE in port: PoE PIN 1/2 = (+) PIN 3/6 = (-) or PIN 4/5 (+) and  PIN 7/8 = (-) PoE out port:  PINS 1/2 = (+) and  PINS 3/6 = (-) PoE port 2 Power Supply PoE PD port input 95W Max PoE Power Output Per port 48-55V DC  Max.30W IEEE802.3at Operating Temperature -20°C ~ 60 °C Storage Temperature -40 °C ~ 80 °C Operating Humidity 10% ~ 90% non-condensing Storage Humidity 5% ~ 90% non-condensing Surge Protection Differential mode±4KV, Common mode±6KV MTBF >50000 hour Electrostatic standard Contact 6KV,air 8KV Weather Rating IP67 Vandal Proof IK10 Marks CE

Fast Ethernet Medienkonverter 100Base-TX/100Base-FX, SC-Stecker, Multimode 1310nm, schraubbarer Netzteilanschluss, inkl. externes Netzteil (5 V DC), 100..240 VAC, 50/60Hz

MSP800 MM/SM-Umsetzermodul managed max. 1.25Gbit/s MM 850nm SC dupl. / SM 1310nm SC dupl. 10km, transparent

Highlights: 1x 10/100BaseTX Ethernet TP Port, 1x100BaseFX Ethernet Fiber Port TP Port unterstützt Half/Full-Duplex, Auto-MDI/MDI-X und Auto-Negotiation FX Fiber Port unterstützt Multi Mode SC Ethernet 802.3x Flow Control Technische Daten:   Element Spezifikation Standards:   IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/100BaseFX IEEE 802.3x Flow Control Netzwerkanschlüsse: 1x 10/100BaseT (RJ-45) Connector 1 100BaseFX mit Fiber Connector MM, SC Datenübertragungsrate: Ethernet: 10Mbps/Half-Duplex ; 20Mbps/Full-Duplex Fast Ethernet: 100Mbps/Half-Duplex; 200Mbps/Full-Duplex Übertragungsmedien: 10BaseT Cat. 3, 4, 5 UTP/STP, bis zu 100 m 100BaseTX Cat. 5 UTP/STP, bis zu 100 m 100BaseFX 50/125µm oder 62.5/125µm Multi Mode SC-Typ LWL, bis zu 2 km Led Anzeige: 1x Power on Per Port:(TX): Link, TX ; (FX): Link, RX Stromversorgung: DC 5V/2A externes Netzteil Stromverbrauch: 3 Watts (Max) Maße: 94 × 71 × 26 mm (L x B x H) Gewicht: 230g ohne Netzteil und Verpackung Umgebung: Temperatur Betrieb: 0 ~ 50 °C Luftfeuchtigkeit Betrieb: 10% ~ 90% (nicht kondensierend) Temperatur Aufbewahrung: -20 ~ 70 °C Luftfeuchtigkeit Aufbewahrung: 10% ~ 90% (nicht kondensierend) Kennzeichnung: CE

MSP800 MM/SM-Umsetzermodul managed max. 1.25Gbit/sMM 850nm SC dupl. / SM 1310nm SC dupl. 20km, transparent

Konverter/Bridge Modul 10/100TX-100FX, SC-Stecker, 1310nm Multimode

Konverter/Bridge Modul 10/100TX-100FX, ST-Stecker, 1310nm Multimode