Highlights: Outdoor IP68 Gigabit Repeater 1x 10/100/1000M PoE (IEEE802.3at POE+) INPUT 1x 10/100/1000M PoE (IEEE802.3at POE+) OUTPUT Max. OUTPUT Power 25W,  PoE Pin 1/2(+) 3/6 (-) Outdoor Temperature Range: -25°C bis +55°C Power over Ethernet, simply expand by 100m. The Power Over Ethernet Repeater ALLNET ALL-PR2012P-E extends the PoE and network range by another 100m. Depending on the PoE input power, up to 4 repeaters can be connected in series. We recommend e.g. the ALLNET ALL0489v3 PoE injector for the output power or any other PoE IEEE802.3at switch.   Technical Details: IEEE Standard: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ Network Connector: 1x 10/100/1000M PoE (IEEE802.3at POE+) INPUT 1x 10/100/1000M PoE (IEEE802.3at POE+) OUTPUT Power over Ethernet input: Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+) Power over Ethernet output: Pin Assignment and Polarity: 1/2 (+), 3/6 (-) Output power: up to 25W Maximum Distance: Expand Range up to max. 100m Connectors: Waterproof RJ-45, EIA 568A and 568B Network cables: Outdoor type shielded category 5 (or higher) Dimensions: 185mm x 45mm x 45mm Mounting: Wall or Shelf Environment: Indoor or Outdoor Environmental Conditions: Operating Ambient Temperature: -25 to 55°C Operating Humidity: Maximum 90%, noncondensing Storage Temperature: -30 to 70°C Storage Humidity: Maximum 95%, noncondensing

Highlights: Outdoor IP67 Gigabit Extender Repeater. 1x 10/100/1000M PoE (IEEE802.3bt POE+) INPUT 2x10/100/1000M PoE (IEEE802.3af /at POE+) OUTPUT Extended operating temperature: -20°C to +60°C The new ALL-PR2013O-30W is a small 2-port PoE switch or PoE repeater and extends the PoE signal by 100 meters each. This length is normally the maximum distance for PoE supply from power and data. With the help of the repeater, up to 300 meters of PoE can be achieved if a new device is installed every 100 meters. This is only possible because it is an active device and the signal is always reprocessed. The repeater is fed with IEEE802.3bt and outputs IEEE802.3af/at PoE up to 70 watts. The certification for protection classes -IP67 makes the product suitable for outdoor use, as it is dustproof and protected against heavy splash water and short submersion. To give you a better idea of the concept of an outdoor repeater, here are some usage scenarios:     Power and data supply of an outdoor IP camera and an access point simultaneously     Connection of two IP cameras with simultaneous power supply     Possibility of an emergency IP phone outside the company building     Bridging of a longer distance between two buildings A BT power supply is required!!! e.g. 188381  Technical Details: Model ALL-PR2013O-30W Standard IEEE802.3 IEEE802.3u IEEE802.3ab IEEE802.3x IEEE802.3af IEEE802.3at IEEE802.3bt Port PoE in port:1 x 10/100/1000Mbps RJ45 port PoE out port : 2 x 10/100/1000Mbps RJ45 port Network Media(Cable) 10BASE-T: UTP category 3,4, 5 cable (≤100m) 100BASE-TX: UTP category 5,5e cable (≤100m) 1000BASE-TX: UTP category5e cable (≤100m) LED LAN PoE Standard IEEE802.3af/at/bt Dimensions (L*W*H) 150*73*44MM RJ45 PoE PoE in port: PoE PIN 1/2 = (+) PIN 3/6 = (-) or PIN 4/5 (+) and  PIN 7/8 = (-) PoE out port:  PINS 1/2 = (+) and  PINS 3/6 = (-) PoE port 2 Power Supply PoE PD port input 95W Max PoE Power Output Per port 48-55V DC  Max.30W IEEE802.3at Operating Temperature -20°C ~ 60 °C Storage Temperature -40 °C ~ 80 °C Operating Humidity 10% ~ 90% non-condensing Storage Humidity 5% ~ 90% non-condensing Surge Protection Differential mode±4KV, Common mode±6KV MTBF >50000 hour Electrostatic standard Contact 6KV,air 8KV Weather Rating IP67 Vandal Proof IK10 Marks CE                                                                                

Long-range Gigabit Ethernet adapter that receives PoE/PoE+ and offers passthrough PoE output. Extend PoE connections up to 1 km* (1) GbE RJ45 port for PoE/PoE+ input** (1) GbE RJ45 port for passthrough PoE output 10kA+ surge protection Works reliably in extreme temperatures (-40 to 80° C) *Repeaters must be placed in 100 m increments. **Powered with pins 1, 2+; 3, 6- which may not be supported by certain third-party switches. We recommend using a UniFi switch to power the device.     Technical Specifications Mechanical Dimensions 196.5 x 93.5 x 39 mm ( 7.7 x 3.7 x 1.5") Weight 350 g (12.3 oz) Enclosure material UV stabilized polycarbonate Mounting material Stainless steel Weatherproofing IPX5 Hardware Networking interface (2) GbE RJ45 ports PoE interface (1) Passthrough PoE output 2-pairs (pins 1,2+; 3,6-) Power method PoE/PoE+ 2-pairs (pins 1, 2+; 3, 6-)* *May not be supported by certain third-party switches. We recommend using a UniFi switch to power the device. Max. power consumption (excluding PoE out) 1.5W Voltage range 37—57V DC ESD/EMP protection Air/contact: ± 30kV DC sparkover voltage 90V at 100V/s Max. impulse sparkover voltage 700V at 1kV/μs Discharge current 10kA+ Max. MTU 1,500 bytes Modes Long-range indoor Outdoor ethernet repeater Operating temperature -40 to 80° C (-40 to 176° F) Operating humidity 10 to 95% non-condensing Certifications CE, FCC, IC LEDs System Blue: power ON Ethernet Green: 1 Gbps Amber: 10/100 Mbps PoE Amber: passthrough PoE out

Highlights: 2x Gigabit Ethernet ports PoE (data and power). LT PoE++, IEEE802.3 at+/at/af up to 6 repeaters cascadable Power over Ethernet, simply extend by 100m. The Power Over Ethernet Repeater ALLNET ALL048600 extends the PoE and network range by 100m. Depending on the PoE input power, up to 6 repeaters can be connected in series. We recommend e.g. the ALLNET ALL048900 LT PoE injector for the output power. Technical data:   Element Spezifikation Unterstützte Standards: LT PoE++ IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet enhancements IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE 802.3ab 1000BaseT Anschlüsse: 1x RJ45 Eingang (Daten und Strom) 1x RJ45 Ausgang (Daten und Strom) LED Indikatoren: Power / PoE Act/Status Spannungseingang: PoE 36~57V Spannungsausgang: LT PoE++, 802.3af/at/at+ Stromverbrauch: System: 2,1A (Max.120W), StandBy: typ. 1,5W Gehäuse: Metallgehäuse, Wandmontage möglich Maße: Länge/Breite/Höhe: 200 x 80 x 36 mm Gewicht: 253g (o. Netzteil und Verpackung) Umgebung: Temperatur Betrieb: 0 ~ 50 °C Luftfeuchtigkeit Betrieb: 10% ~ 90% (nicht kondensierend) Temperatur Aufbewahrung: -40 ~ 70 °C Luftfeuchtigkeit Aufbewahrung: 5% ~ 90% (nicht kondensierend) Kennzeichnung: CE

Highlights: 2x Gigabit Ethernet ports PoE (Daten und Strom) LT PoE++, IEEE802.3 at+/at/af bis zu 6 Repeater kaskadierbar   Power over Ethernet, einfach um 100m erweitern. Der Power Over Ethernet Repeater ALLNET ALL048600 erweitert die PoE- und Netzwerkreichweite um 100m. Je nach PoE Eingangsleistung können bis zu 6 Repeater hintereinander verbunden werden. Wir empfehlen z.B. den ALLNET ALL048900 LT PoE Injektor für die Ausgangsleistung. Technische Daten: Element Spezifikation Unterstützte Standards: LT PoE++ IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet IEEE802.3 10BaseT IEEE802.3u 100BaseTX IEEE 802.3ab 1000BaseT Anschlüsse: 1x RJ45 Eingang (Daten und Strom) 1x RJ45 Ausgang (Daten und Strom) LED Indikatoren: Power / PoE Act/Status Spannungseingang: PoE 36~57V Spannungsausgang: LT PoE++, 802.3af/at/at+ Stromverbrauch: System: 2,1A (Max.120W), StandBy: typ. 1,5W Gehäuse: Metallgehäuse, Wandmontage möglich Maße: Länge/Breite/Höhe: 200 x 80 x 36 mm Gewicht: 253g (o. Netzteil und Verpackung) Umgebung: Temperatur Betrieb: 0 ~ 50 °C Luftfeuchtigkeit Betrieb: 10% ~ 90% (nicht kondensierend) Temperatur Aufbewahrung: -40 ~ 70 °C Luftfeuchtigkeit Aufbewahrung: 5% ~ 90% (nicht kondensierend) Kennzeichnung: CE