ALLNET ALL-PoE-CLK-1 / PoE Clock, Uhr

Temperature measurement via network easy made Highlights: detection of Temperature / Humidity / Gas / Smoke / Movement etc. via network Robust metal housing Brackets for attachment to wall Suitable for all operating systems 1x ALL3006 Temp-Sensor including Flexible/Multiple Installation of different ALLNET Bulding-Automation Units can be controlled in one Web-GUI with JSON API Optional Free-Software Modules like SNMP  / FTP Upload / POST_GET / Upload into PoE Clock/Counter / EnOcean / The ALLNET ALL3419 IP Thermometer/Automation-Building-Main-Unit is a flexible and economical solution for temperature measurement over a network. The very compact design makes it suitable for use in confined spaces. The rugged metal housing has tabs for mounting on walls and ceilings and protects against mechanical damage. The ALL3419 IP Thermometer/Automation-Building-Main-Unit is connected to a computer network via cable or WLAN and is accessible by an IP address. The measured values ??can be accessed via web browser on the device itself. No additional software is required for operation. Thus the ALL3419 is appropriate for all operating systems. The temperature is measured by the included I2C RJ45 temperature sensor ALL3006. Another internal onboard sensor shows the internal system temperature. With the optional ALL3018 temperature & humidity sensor can detect also humidity. The measurement intervals can be set second by second. The last 512 values can be shown directly as a graphical trend. Additional Sensors and Actors can be also measure Gas / Movement etc. see http://www.allnet.de/en/allnet-brand/produkte/home-automation/home-automation-sensoren/ Intelligent features and programming by switching matrix Depending on measured values certain actions can be programmed over the software based switching matrix. For example, if temperature is above or below defined limits, the readings can be sent by email. This may once, several times, and/or in certain time intervals, so long as the matrix condition exists. Another possibility is switching of external IP switching devices, such as network-sockets series ALL307x or network-relay ALL4075/4175 as well as directly connected actuators, for example the relay module ALL4427/3527. Alternativly can be switches also over the JSON Protocol.   Flexible installation options The external sensors can be plugged directly on ALL3419 or can be connected remotely via a control line. For remote connection a simple network cable (RJ45 connector, Cat. 5) is suitable to connect the sensors with the CPU. This way of connection is used in all ALLNET Home Automation products. For this purpose, an existing cable network such as already installed network or telephone lines can be used. The maximum cable length between CPU and sensor module can be up to 100 meters. The power supply of the sensor modules is already done via the main unit. A separate power source for each sensor module is not necessary.   Borderless Cross-site temperature measurement Several ALL3419 can operate in conjunction with the bigger control and measurement computers ALLNET ALL3500/3505/4500 or ALL5000, to show a lot of geographically distributed values in a centralized way. Each individual ALL3419 is queried over an individual IP address and centrally stored and displayed in all the other Main-Units like ALL3418v2/3419/3500/3505/4500/5000 etc. Maximum number of sensors per ALL3419:       Element Specification Sensor interface: 3x RJ45 for sensor/actor modules 1x USB 2.0 for additional Wireless Dongles like "EnOcean or Plugwise" 1x RJ45 Console Port for Serial-Connection Ethernet: 1x RJ45 10/100Mbps Wireless LAN: Ralink/Mediatek MT7688AN 2,4 GHz Wireless N, up to 150 Mbps Security: WEP 64/128bit, WPA, WPA2 Standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Power source: 100~240 VAC, 50/60 Hz Power Consumption: <3 watt in operation Housing: metal housing Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 70 °C Storage humidity: 5% ~ 90% (non-condensing) Regulatory: CE, RoHS Dimensions: 92 x 85 x 24 mm (L x W x H)  Weight: 134 g (ALL3419 with ALL3006 sensor) Package content: -ALLNET ALL3419 -ALLNET ALL3006 temperature sensor -WLAN antenna -External power supply -Quick installation guide

Your smart entry into building automation – ALLNET ALL3500v2 With the ALLNET ALL3500v2 building automation centre, you get a cost-effective and versatile platform that is optimally tailored to semi-professional requirements. Thanks to state-of-the-art technology, high connectivity and a wide range of applications, the ALL3500v2 is the perfect partner for your automation projects. Highlights at a glance: Cost-efficient platform: Maximum functionality with minimum space and cost requirements. Intuitive operation: Can be conveniently controlled via web interface (HTTP/HTTPS) or smartphone. Flexible data connection: Integration via JSON, MQTT or SNMP possible. Versatile sensor technology: Comprehensive monitoring of temperature, humidity, air pressure and more. Future-proof: Expandable with i2C sensor ports and compatible with a wide range of ALLNET sensors and actuators. Features that impress The ALL3500v2 is based on a stable embedded Linux platform (MIPS or ARM architecture), which enables seamless integration into existing systems. With four RJ45 ports for sensor modules, you can realise a wide range of control and monitoring tasks. Whether local control or cloud-based applications - the ALL3500v2 offers you all the tools you need to organise your building automation efficiently and securely. Versatile application options: HACCP temperature monitoring: Precise detection and control in critical environments. Room climate control: Monitoring of temperature and humidity for demand-based control of heaters or humidifiers. Security management: Detection of gas odour, smoke or water ingress and triggering of alarms. Automated garden irrigation: Time and humidity-controlled for maximum efficiency. Energy consumption optimisation: Control based on consumption data from external sensors (e.g. ALL4590/4490 power meter). Compact, powerful, versatile The ALL3500v2 combines a variety of functions in a compact design that has been specially developed for space-saving installations. With four relays, sensor ports and contact interfaces, it can be used flexibly and provides the basis for sophisticated automation solutions - ideal for private and commercial applications. Why ALLNET ALL3500v2? With the ALL3500v2 you get a reliable and economical solution for building automation. From monitoring and control to integration into complex installations, this central unit offers everything you need for smart, efficient and future-proof automation. Start your building automation now with the ALLNET ALL3500v2! Versatile sensors, actuators and switching options for your automation The ALLNET ALL3500v2 impresses with its flexibility and functionality: With four ports for external sensors and actuators, four relay outputs for controlling loads and four contact inputs for buttons or switches, it provides an ideal basis for complex automation applications. Sensing and control – Precise and versatile With the ALL3500v2, you can measure and analyse a variety of environmental parameters such as temperature, humidity or air pressure and execute automatic switching operations based on them. Control is either manual, time-controlled or dynamic, based on the measured values. Connectivity that inspires The ALL3500v2 is equipped with Ethernet and built-in WLAN, which enables easy integration into existing networks. Using an IP address in the TCP/IP network, you can: Retrieve and edit measurement data directly in the web browser. Receive automated notifications and reports by email. Request and control data via JSON or XML interfaces. Optional MQTT support enables the transmission of data to the cloud and integration into IoT environments. With its powerful connectivity and flexible control options, the ALL3500v2 is the perfect choice for efficient and future-proof building automation.   I²C-Bus – Intelligent use of existing cable networks The ALLNET ALL3500v2 enables an uncomplicated connection of measurement and control modules via a standard network cable (RJ45, Cat. 5). This allows you to continue using existing cable infrastructures such as network or telephone cabling and saves costs and effort during installation. Advantages of the I²C bus system: Simple cabling: A standard network cable is sufficient to connect sensors and modules. Long range: Up to 100 metres of cable between the central unit and module. Integrated power supply: The modules are supplied with power directly from the central unit – no separate power source required. USB port – external memory connection The USB port on the ALLNET ALL3500v2 allows you to integrate external storage media easily and flexibly. This allows data to be saved and processed directly on connected USB devices. This enables extended data logging and analysis. Maximum number of sensors per ALL3500v2: Technical data: Element Specification Interfaces: 4x RJ45 for sensor modules Network connection: 1x RJ45 10/100Mbps Switching relay: 4x potential-free Contact input: 4x for push-buttons, switches, etc. Wireless LAN: Mediatek MTK7688 SOC chipset 2.4 GHz Wireless N Security: WEP 64/128bit, WPA, WPA2 Supported standards: IEEE 802.3 IEEE 802.3u IEEE 802.11b/g/n Other interfaces: 1x USB 2.0 1x console Power supply: 100~240 VAC, 50/60 Hz, external power supply Power consumption: <5 watts maximum How to use: Metal walkway Environment: Operating temperature: 0 ~ 40 °C Operating humidity: 10% ~ 85% (non-condensing) Storage temperature: -20 ~ 60 °C Storage humidity: 5% ~ 90% (non-condensing) Labelling: CE, RoHS Dimensions: 220.4 x 80 x 30 mm (length x width x height) Weight: 400 grams (device incl. WLAN antenna and ALL3006 sensor) Packaging contents: -ALLNET ALL3500v2 -ALLNET ALL3008 temperature sensor -WLAN antenna -External power supply -Operating instructions